[thebhef]

A logger's finish line reported only the frame count, even when the
writer had to move an event forward because it arrived stamped before
the file's own anchor (ADR 0024: a frame before the anchor has no
representation in BLF and is written at the anchor instead). Save
Capture already turns that report into a system-log warning via
capture.rs's clamped_timestamp_warning; the logger's finish path, and
each size-cap split part, did not — parity, not new design, per the
task's ruling.

LogWriter::write and finish now hand the caller the closed part's
cannet_blf::FinishedCapture (Option, since a no-op close reports
nothing) instead of discarding it. run_logger turns a Some into the
same warning Save Capture emits, at the run's own finish and at every
part a size-cap split closes along the way. New host tests drive a
LogWriter through a frame stamped before its anchor and assert the
clamp is reported both ways, reusing capture::clamped_timestamp_warning
rather than writing a second formatter.

Also corrects the two sentences the driver-unwrap phase (task 155
phase 1) left claiming an upstream python-can issue tracks the Kvaser
timer-wrap defect. The owner has ruled cannet does not modify or
petition its python-can dependency, so the sidecar README and the
technology-inventory python-can entry now say the defect is worked
around locally with no upstream change pursued.

Running this task's full CI matrix (its final phase) surfaced a
rustdoc broken-intra-doc-link regression already on this branch's
base: FirstDrop's doc comment linked Self::frames_dropped_before_session
from inside FirstDrop itself (no such method there — the method is
TraceStore's), and two doc comments linked the private
crate::emitters::DropEpisode as an intra-doc link, which rustdoc
--document-private-items=false rejects. Both fixed in trace_store/mod.rs
as part of this commit, being small, unambiguous, and blocking the
rustdoc -D warnings lane.

Co-Authored-By: Claude Sonnet 5 noreply@anthropic.com

[thebhef]

• Queue the feedback campaign's findings for owner review #502
• Startup restore feedback: a relaunch reports the prior capture's reopen in the status bar #575
• Plot y scale: fit what is on screen, keep a bound typed and left by clicking away #574
• Report a failed manual send and a failed Duplicate #573
• Round calendar-time fractions so they agree with the elapsed column #572
• Keep an enum's held codes and its changes visible at every zoom #571
• Adopt ruff 0.16's default rule selection in the three Python packages #570
• Duplicate a transmit element with its own cloned host TX frames #569
• Add a Duplicate button to the Project panel's element rows #568
• Read calendar time on the plot under time_display #567
• Read calendar time in the trace, By-ID, Events and Signals time cells #566
• Add the time_display setting and the calendar-time formatters #565
• Draw a ranged series straight between its own samples #564
• Copy plot areas with the platform's modifier, same panel included #563
• Keep a name beside a fixed sibling shrinking instead of vanishing #562
• Collapse plot axes only, with the disclosure leftmost on every head #561
• Logger {now} names each file of a run, not the run itself (task 165 phase 3) #560
• Date/time pattern setting: five display sites collapse into one formatter #559
• Name templates speak TR35 date patterns; strftime removed (ADR 0062) #558
• Remove the refused-send row: only the wire writes data (ADR 0061) #557
• Python toolchain: forward-and-consistent grpcio/protobuf/grpcio-tools, ruff 0.16 with an explicit rule set #556
• Row the time cursor chips when they collide; scale their precision with zoom #555
• Fault-recovery bench: six PEAK runs of the shipped recovery recorded #554
• Reopen a channel close-first, retry a failed open, and let a bus-off refusal arm the reset #553
• Add a fault-recovery bench that swaps the sidecar's bus-off recovery per run #552
• Persist bus-error episode detail with the error series #551
• Fix the host README's stale stuck-queue paragraph for ADR 0060 #550
• Render ADR 0060's bus-fault fields in the frontend #549
• Read bus faults from the sidecar's episode reports on the host #548
• Decode ADR 0060's bus-fault envelopes into per-interface client state #547
• Report bus faults from the sidecar as episodes, on a control lane ahead of data #546
• Add bus-fault reporting envelopes to cannet.v1 (ADR 0060 phase 3) #545
• Record the bus-fault model: sidecar-reported episodes, two lanes, flush a stuck queue #544
• Add a fault-load harness for the sidecar's session stream #543
• Remove the redundant Events disclosure chip from plot and trace #540
• List bus-error episodes among the events in the Events panel's one list #539
• Let only the wire write the Tx row: the driver's echo, not the send #538
• Refresh the plot's bus-error markers as errors arrive #537
• Add a cargo fmt --check job to CI #535
• Show searching… then the host's match count in the trace filter box #534
• Draw the plot's bus-error markers as episodes at the configured gap #533
• Read event and bus-error episode times as wall time on hover #532
• List bus errors as episodes at a configurable gap in the Events panel #531
• Page bus-error episodes into the Events panel; leave the trace's rows alone #530
• Give bus-error markers a windowed query on the plot #529
• Serve bus errors as a paged series from the signal cache #528
• Widen the logger file grid's action column and fix its column order #527
• Keep the window up while the host finishes closing #525
• Hold a project's cache directory exclusively for the session #524
• Reproduce the restore-time 1224 panic as two live mappings on one scratch #523
• Log a logger's clamped timestamps the way Save Capture already does #522 👈 (View in Graphite)
• Turn the trace store's before-session frame drops into a coalesced WARN #521
• Make PEAK bus-off visible and reopen a silent, queue-full channel #542
• Withhold PEAK echoes while error-passive; clear stale counters per poll #541
• Bring a bus-off controller back without user action, on every vendor #536
• Unwrap the Kvaser 32-bit receive timer in the sidecar driver #520
• Move the Servers rows into the settings view as a gridview #519
• Make the project caches list a gridview, and share its scroll-restore #518
• Make the settings view's units section a gridview #517
• Open the trace panel's signal disclosure on a signal or value winner #516
• Rank signals and enum values in their own right in the trace filter #515
• Answer before deriving: listings, index rebuilds and poll guards #514
• Take the heavy host commands off the IPC thread #513
• Alias a library unit through the settings units entry #512
• Colour a gridview selection at once, in Signals panel and plot area #511
• Project caches: chip carries location, tooltip follows it, no more danger button #510
• Filter the unit picker, and let a composed kind offer its whole class #509
• Read the whole unit table out of the library instead of typing it #508
• Name the project in each project-caches row; Delete becomes two-stage #507
• The settings view re-reads what it shows and keeps its place #506
• Draw plot sample markers as squares, collapsed per pixel column #505
• Draw the plot's hover chrome on an overlay canvas #504
• Close the palette before running the picked command #503
• Plumb empty plot areas, per-area event-marker base, and an Events chip #501
• Move the cursor and event readouts out of the data area into gutters #500
• Mark every served sample, and make an enum lane an ordinary series #499
• Serve every window as first, last, min and max, and drop the categorical reducer #498
• Measure what a plain min/max serve does to a held enum code #497
• Filter the Trace panel's rows with the same fzf, in both modes #496
• Rank the trace's rows host-side with the app's own fzf #495
• Let a bus explicitly set to no interface connect as unbound #494
• Let regular collapse/expand work while the database/RBS filter is active #493
• Groom five tasks: four out of the user feedback, plus the trace filter #492
• Fix fit-data test racing its own catch-up deadline #526
• main

This stack of pull requests is managed by Graphite. Learn more about stacking.

[thebhef]

Merge activity

• Oct 14, 9:10 PM UTC: A user started a stack merge that includes this pull request via Graphite.
• Oct 14, 10:24 PM UTC: Graphite rebased this pull request as part of a merge.
• Oct 14, 10:27 PM UTC: @thebhef merged this pull request with Graphite.