Client Commands

Client commands manage client connections and configurations for controlling the FlexRadio.

Warning

This has been generated by AI and accuracy is not guaranteed.

Command Index

• Command Index
  • CLIENT BIND
  • CLIENT DISCONNECT
  • CLIENT GUI
  • CLIENT IP
  • CLIENT LOW_BW_CONNECT
  • CLIENT PROGRAM
  • CLIENT SET
  • CLIENT START_PERSISTENCE
  • CLIENT STATION
  • CLIENT UDPPORT

CLIENT BIND

Bind to a GUI client session.

C[D]<seq_number>|client bind client_id=<id>

Parameters:

• <id> = client identifier

Example:

C30|client bind client_id=0x12345678

Response:

R30|0||                                          (success - client bound)
R30|50000002||Invalid client ID                  (error - client ID not found)

Response Codes:

Hex Code	Meaning
00000000	Success - returns handle of the GUI client

CLIENT DISCONNECT

Disconnect client from radio.

C[D]<seq_number>|client disconnect

Example:

C31|client disconnect

Response:

R31|0||                                          (success - client disconnected)

Response Codes:

Hex Code	Meaning
00000000	Success
50000062	Invalid client

CLIENT GUI

Get or set GUI client information.

C[D]<seq_number>|client gui

Example:

C32|client gui

Response:

R32|0|client_id=0x12345678 program=SmartSDR station=Station1|  (success - returns GUI client info)

Response Codes:

Hex Code	Meaning
00000000	Success - returns client_id (if no client_id was specified in command, one will be returned)

CLIENT IP

Get client IP information.

C[D]<seq_number>|client ip

Example:

C33|client ip

Response:

R33|0|192.168.1.100|                            (success - returns client IP)

CLIENT LOW_BW_CONNECT

Enable low bandwidth connection mode.

C[D]<seq_number>|client low_bw_connect

Example:

C34|client low_bw_connect

CLIENT PROGRAM

Set client program name.

C[D]<seq_number>|client program <program_name>

Parameters:

• <program_name> = name of the client application

Example:

C35|client program SmartSDR

Response:

R35|0||                                          (success - program name set)

Response Codes:

Hex Code	Meaning
00000000	Success

CLIENT SET

Configure various client parameters. All set commands follow the pattern:

C[D]<seq_number>|client set <parameter>=<value> [additional_parameters]

Available Parameters:

Parameter	Value Range	Description
local_ptt	0|1	Disable/enable local PTT control
send_reduced_bw_dax	0|1	Disable/enable reduced bandwidth DAX transmission
enforce_network_mtu	0|1	Disable/enable network MTU enforcement
network_mtu	mtu_size	Set Maximum Transmission Unit size (used with enforce_network_mtu)

Examples:

C36|client set local_ptt=1
C37|client set send_reduced_bw_dax=0
C38|client set enforce_network_mtu=1 network_mtu=1500

CLIENT START_PERSISTENCE

Control persistence settings.

C[D]<seq_number>|client start_persistence off

Example:

C39|client start_persistence off

Response Codes:

Hex Code	Meaning
00000000	Success

CLIENT STATION

Set station name.

C[D]<seq_number>|client station <station_name>

Parameters:

• <station_name> = name of the station

Example:

C40|client station HomeStation

Response Codes:

Hex Code	Meaning
00000000	Success

CLIENT UDPPORT

Set client UDP port.

C[D]<seq_number>|client udpport <port>

Parameters:

• <port> = UDP port number

Example:

C41|client udpport 4991

Response Codes:

Hex Code	Meaning
00000000	Success - successfully registered port number