Repository navigation
omamobile-modem-sit 0.3.30, device-cheetah 0.1.44: call audio on a fresh Pixel 7 Pro install - #416
Merged
Merged
Conversation
…esh Pixel 7 Pro install The packaged /etc/omamobile/modem-sit.conf and the built-in default both said [audio] card = none, so a phone installed from the image connected calls with no audio at all. The reference phone had audio only because its config was edited by hand (card = auto, 2026-11-03), and pacman keeps an edited backup= file, so the release notes' "calls work" held for that phone alone. The default can't simply become "auto": the same package runs on the Pixel 9a and the Pixel 6 Pro, whose call routes aren't verified (on the 9a, #367's experimental speakerphone route is opt-in through this key). So the default now comes from the device package: - modem-sit reads /usr/lib/omamobile/modem-sit.conf.d/*.conf after its built-in defaults and before /etc (a value set in /etc still wins; OMAMOBILE_SIT_DEFAULTS for the tests). The built-in default stays none. - The packaged /etc file leaves card commented out, so the device's default applies on a fresh install. - device-cheetah ships 50-cheetah.conf with card = auto: each call in the protection service's earpiece mode, clean by ear on VoLTE calls on 2026-11-03 (NOTES). A phone whose modem-sit.conf was edited (the Mobile network page writes it) keeps its explicit "card = none" line; the upgrade message says to delete it. Nothing else changes for the 9a or the 6 Pro: without a device file they stay at none. device-cheetah's boot files are unchanged (only src/ is hashed), so no restaging is needed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
derekross
added a commit
that referenced
this pull request
Nov 3, 2026
Round 39 (2026-11-03) reviewed 40 pull requests and issues, and the maintainer's merges of the modem bring-up night. The confirmed lessons: version collisions that merge silently across open PRs, boot-file staleness from a device package's src/, shipped defaults checked on a fresh install rather than the reference phone (the card = none that #416 fixed), shutdown events that the next boot's dmesg can't see, guards added through the root image alone, conflict resolutions whose kept tests depend on order, and squash merges without a body. Corrections: C-26 (provisional) on L-190's reasoning about a longer BT_REG_ON hold; C-27 corrects L-326 in place (gs101's ACPM clocks are cached); C-28 on our first #282 review's premise. L-102, L-158 and L-183 gain one sentence each. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This was referenced Nov 5, 2026
derekross
added a commit
to W4HO-ham/omarchy-mobile
that referenced
this pull request
Nov 5, 2026
robotosaith
added a commit
to robotosaith/omarchy-mobile
that referenced
this pull request
Nov 10, 2026
…ekross#373, derekross#398 and derekross#416 main took modem-sit 0.3.29 (derekross#373) and 0.3.30 (derekross#416), and modem 0.1.15 and 0.1.16 (derekross#382, derekross#398), while this waited: the sitd exit lands as 0.3.31 and the modem changes as 0.1.17. The NV overlay's note now says the copies are f2fs on gs201 and ext4 on gs101; it works on the mounted copies, so nothing else in it changes for raven. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
robotosaith
added a commit
to robotosaith/omarchy-mobile
that referenced
this pull request
Nov 11, 2026
…ekross#373, derekross#398 and derekross#416 main took modem-sit 0.3.29 (derekross#373) and 0.3.30 (derekross#416), and modem 0.1.15 and 0.1.16 (derekross#382, derekross#398), while this waited: the sitd exit lands as 0.3.31 and the modem changes as 0.1.17. The NV overlay's note now says the copies are f2fs on gs201 and ext4 on gs101; it works on the mounted copies, so nothing else in it changes for raven. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
robertzas
pushed a commit
to robertzas/omarchy-mobile
that referenced
this pull request
Nov 14, 2026
…esh Pixel 7 Pro install (derekross#416) A phone installed from the image connected calls with no audio: the packaged /etc/omamobile/modem-sit.conf and modem-sit's built-in default both said [audio] card = none. The reference phone had audio only because its file was edited by hand on 2026-11-03. The default now comes from the device package. modem-sit reads the [audio] section of /usr/lib/omamobile/modem-sit.conf.d/*.conf after its built-in defaults and before /etc, so a value in /etc still wins; a device file that can't be read or parsed is skipped. The packaged /etc file leaves card commented out, and device-cheetah ships card = auto: each call in the protection service's earpiece mode, refused (the call goes on silent) if protection isn't running. The 9a and 6 Pro ship no file and stay at none. An edited modem-sit.conf keeps its card = none line; the upgrade message says so only when the line is there, and only tells a 7 Pro to delete it. Boot files are unchanged (only src/ is hashed). NOTES 2026-11-03 now records the hand edit; MODEM-CLIENT, MODEM-PLAN, ROADMAP, the 2026.11.03 release notes and device-cheetah's README follow. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
robertzas
pushed a commit
to robertzas/omarchy-mobile
that referenced
this pull request
Nov 14, 2026
…rekross#417) Round 39 (2026-11-03) reviewed 40 pull requests and issues, and the maintainer's merges of the modem bring-up night. The confirmed lessons: version collisions that merge silently across open PRs, boot-file staleness from a device package's src/, shipped defaults checked on a fresh install rather than the reference phone (the card = none that derekross#416 fixed), shutdown events that the next boot's dmesg can't see, guards added through the root image alone, conflict resolutions whose kept tests depend on order, and squash merges without a body. Corrections: C-26 (provisional) on L-190's reasoning about a longer BT_REG_ON hold; C-27 corrects L-326 in place (gs101's ACPM clocks are cached); C-28 on our first derekross#282 review's premise. L-102, L-158 and L-183 gain one sentence each. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
A phone installed from the image connected calls with no audio: modem-sit's packaged
/etc/omamobile/modem-sit.confand its built-in default both said[audio] card = none, and the reference phone had audio only because its file was edited by hand on 2026-11-03 (pacman keeps an editedbackup=file).The default now comes from the device package. modem-sit reads the
[audio]section of/usr/lib/omamobile/modem-sit.conf.d/*.confafter its built-in defaults and before/etc, so a value in/etcstill wins; a device file that can't be read or parsed is skipped (the safe side, no route). The packaged/etcfile leavescardcommented out, and device-cheetah shipscard = auto: each call in the protection service's earpiece mode, refused if protection isn't running (the call goes on silent). The 9a and 6 Pro ship no file and stay atnone; #367's opt-in through/etcis unchanged.Upgrades: an unmodified
modem-sit.confis replaced. One the Mobile network page or a person edited keeps itscard = noneline; the upgrade message says so only when that line is there, and tells only a 7 Pro to delete it. Boot files are unchanged (stage-boot-fileshashes onlysrc/), so no restaging.Docs: NOTES 2026-11-03 records that the call audio ran on a hand edit; MODEM-CLIENT, MODEM-PLAN's status, ROADMAP M5, the 2026.11.03 release notes and device-cheetah's README follow.
Tests: modem-sit
test/all(unit tests, RIL against sit-sim, new layering tests: no device file, cheetah's file, an edited/etcwins, a broken file is skipped, only[audio]is taken), device-cheetahtest/all(the staged file saysauto),tools/pr-check. Not run on a phone with the default path yet; the release's test install checks it (paths.config()["audio"]["card"]printsauto, and a test call logs "AoC voice playback and capture prepared").Merge before #389 (which becomes modem-sit 0.3.31) and #403 (device-cheetah 0.1.45); the tegu stack rebases onto it.
🤖 Generated with Claude Code