Skip to content
Merged
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
138 changes: 138 additions & 0 deletions arch/arm64/boot/dts/exynos/google/gs201-lynx.dts
Original file line number Diff line number Diff line change
Expand Up @@ -167,3 +167,141 @@
samsung,mode = <USI_MODE_SPI>;
status = "okay";
};

/*
* Bluetooth: the WCN6855 BT core on the APM USI1 UART (ttySAC18 in Google's
* kernel), as on cheetah. Its power is the qcom,wcn6855-pmu sequencer below:
* the shared 0.95 V buck on gph2-5 comes up first with its 7 ms ramp, then
* BT_EN (gpp16-2), then 50 ms. Off is BT_EN low and then the buck, so
* Bluetooth owns gph2-5 and drops it on power-off until a Wi-Fi node takes
* the sequencer's wlan target. WLAN_EN (gph2-4) is left out until there is
* a PCIe node. 3.2 Mbaud garbles every frame on this UART; 3 Mbaud works.
*/
/ {
lynx_wcn_buck: regulator-wcn-buck {
compatible = "regulator-fixed";
regulator-name = "lynx-wcn-0p95-buck";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
gpio = <&gph2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <7000>;
};

/*
* Stand-in for the PMIC rails behind the chip's I/O, 1.3 V and 1.9 V
* inputs. Stock's device tree names no supply on its cnss2 or btpower
* node (only the three GPIOs), so which PMIC regulators feed them is
* unknown; they are on at boot and the host never switches them.
*/
lynx_wcn_pmic: regulator-wcn-pmic {
compatible = "regulator-fixed";
regulator-name = "lynx-wcn-pmic-rails";
regulator-always-on;
};

wcn6855-pmu {
compatible = "qcom,wcn6855-pmu";
pinctrl-0 = <&bt_reg_on>;
pinctrl-names = "default";

bt-enable-gpios = <&gpp16 2 GPIO_ACTIVE_HIGH>;

vddaon-supply = <&lynx_wcn_buck>;
vddpmu-supply = <&lynx_wcn_buck>;
vddpmumx-supply = <&lynx_wcn_buck>;
vddpmucx-supply = <&lynx_wcn_buck>;
vddrfa0p95-supply = <&lynx_wcn_buck>;
vddio-supply = <&lynx_wcn_pmic>;
vddrfa1p3-supply = <&lynx_wcn_pmic>;
vddrfa1p9-supply = <&lynx_wcn_pmic>;
vddpcie1p3-supply = <&lynx_wcn_pmic>;
vddpcie1p9-supply = <&lynx_wcn_pmic>;

regulators {
vreg_pmu_rfa_cmn_0p8: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn_0p8";
};

vreg_pmu_aon_0p8: ldo1 {
regulator-name = "vreg_pmu_aon_0p8";
};

vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};

vreg_pmu_wlmx_0p8: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p8";
};

vreg_pmu_btcmx_0p8: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p8";
};

vreg_pmu_pcie_1p8: ldo5 {
regulator-name = "vreg_pmu_pcie_1p8";
};

vreg_pmu_pcie_0p9: ldo6 {
regulator-name = "vreg_pmu_pcie_0p9";
};

vreg_pmu_rfa_0p8: ldo7 {
regulator-name = "vreg_pmu_rfa_0p8";
};

vreg_pmu_rfa_1p2: ldo8 {
regulator-name = "vreg_pmu_rfa_1p2";
};

vreg_pmu_rfa_1p7: ldo9 {
regulator-name = "vreg_pmu_rfa_1p7";
};
};
};
};

&cmu_apm {
status = "okay";
};

/* gph2 (the buck's GPIO) is on HSI2, disabled in gs201.dtsi. */
&pinctrl_hsi2 {
status = "okay";
};

&pinctrl_peric0 {
status = "okay";

bt_reg_on: bt-reg-on-pins {
samsung,pins = "gpp16-2";
samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <GS101_PIN_PULL_NONE>;
samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
};
};

&serial_apm1 {
status = "okay";

bluetooth {
compatible = "qcom,wcn6855-bt";

vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
vddaon-supply = <&vreg_pmu_aon_0p8>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;

/* 3.2 Mbaud garbles every frame on this UART; 1, 2 and 3 Mbaud work. */
max-speed = <3000000>;
};
};

&usi_apm1 {
status = "okay";
};