Skip to content
Draft
Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
26 commits
Select commit Hold shift + click to select a range
97ebdaa
dt-bindings: phy: google,gs201-mipi-dcphy-rx: Add zumapro
W4HO-ham Oct 27, 2026
823cf3d
phy: samsung: gs201-mipi-dcphy-rx: Add the zumapro receiver
W4HO-ham Oct 27, 2026
09ab492
dt-bindings: media: google,gs201-csis: Add zumapro
W4HO-ham Oct 27, 2026
f6ae67d
media: gs201-csis: Add a link-only zumapro variant
W4HO-ham Oct 27, 2026
00848f6
dt-bindings: media: google,gs201-csis: Add the zumapro CSIS core
W4HO-ham Oct 27, 2026
10c9d6e
media: gs201-csis: Write zumapro frames through the CSIS core
W4HO-ham Oct 27, 2026
a3d6151
dt-bindings: media: i2c: samsung,s5kgn1: Add the S5KGN8
W4HO-ham Oct 27, 2026
e96a87e
media: i2c: s5kgn1: Add the S5KGN8
W4HO-ham Oct 27, 2026
5a03fbc
media: gs201-csis: Reset the zumapro LoCH before each stream
W4HO-ham Oct 27, 2026
74a27fd
media: gs201-csis: Leave PHY_CMN_CTRL alone on zumapro
W4HO-ham Oct 27, 2026
a97139b
dt-bindings: media: google,gs201-csis: Add zumapro's ISP front end cl…
W4HO-ham Oct 27, 2026
2acf342
media: gs201-csis: Raise zumapro's ISP front end clock while streaming
W4HO-ham Oct 27, 2026
75e0264
dt-bindings: media: i2c: sony,imx386: Add the IMX712
W4HO-ham Oct 27, 2026
a73f9a0
media: i2c: imx386: Add the IMX712
W4HO-ham Oct 27, 2026
6af3721
media: gs201-csis: zumapro: Cite the LoCH register source, drop an un…
W4HO-ham Oct 28, 2026
e3ed83d
media: i2c: s5kgn1: Name the GN8 sequence's source and its ldo4/ldo5 …
W4HO-ham Oct 28, 2026
0fc9c5c
MAINTAINERS: Add the gs201/zumapro camera receiver, DC-PHY and sensors
W4HO-ham Oct 28, 2026
9691352
media: gs201-csis: zumapro: Abort a LoCH left bound to its last link
W4HO-ham Oct 28, 2026
ea02b00
soc: samsung: exynos-pmu: zuma: allow the camera receiver's PHY control
W4HO-ham Oct 31, 2026
097b390
dt-bindings: mfd: samsung,s2mpg14/15: Add the GPIO blocks
W4HO-ham Oct 31, 2026
240f14d
mfd: sec: Add the S2MPG14 and S2MPG15 GPIO blocks
W4HO-ham Oct 31, 2026
d3cf77f
gpio: s2mpg13: Add the S2MPG14 and S2MPG15
W4HO-ham Oct 31, 2026
4446ce8
dt-bindings: soc: samsung: exynos-sysreg: Add the zumapro ISP-FE sysreg
W4HO-ham Oct 31, 2026
4105850
arm64: dts: exynos: google: zumapro: Add the camera receiver
W4HO-ham Oct 31, 2026
f59aad4
arm64: dts: exynos: google: zumapro-tegu: Add the camera power
W4HO-ham Oct 31, 2026
6d0a35e
arm64: dts: exynos: google: zumapro-tegu: Add the cameras
W4HO-ham Oct 31, 2026
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
137 changes: 105 additions & 32 deletions Documentation/devicetree/bindings/media/google,gs201-csis.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/media/google,gs201-csis.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Google gs201 CSIS camera receiver link and CSIS WDMA
title: Google gs201 and zumapro CSIS camera receiver link and CSIS WDMA

maintainers:
- Derek Ross <derekross@gmail.com>
Expand All @@ -13,57 +13,45 @@ description:
The camera block of Google's gs201 SoC has eight MIPI CSI-2 receiver links
(CSIS) and a DMA block whose CSIS WDMA contexts write a link's frames to
memory. One node describes one link and the WDMA context it feeds.
zumapro (Tensor G4) has the same receiver link in its ISP front end, with
twelve link contexts; its DMA path is different and not described here.

properties:
compatible:
const: google,gs201-csis
enum:
- google,gs201-csis
- google,zumapro-csis

reg:
minItems: 3
items:
- description: the CSIS link registers
- description: the CSIS DMA block's common page (shared by all links)
- description: the CSIS WDMA context (links may share one; they then
stream one at a time)
- description: the EBUF control (shared by all links), bypassed on the
way to the WDMA
minItems: 1
maxItems: 4

reg-names:
minItems: 3
items:
- const: link
- const: dma
- const: wdma
- const: ebuf
minItems: 1
maxItems: 4

interrupts:
items:
- description: link interrupt
- description: WDMA context interrupt
minItems: 1
maxItems: 2

interrupt-names:
items:
- const: link
- const: wdma
minItems: 1
maxItems: 2

clocks:
items:
- description: the camera block's DVFS domain
- description: the bus (INT) DVFS domain
maxItems: 2

clock-names:
items:
- const: cam
- const: int
maxItems: 2

phys:
maxItems: 1
description: The link's DC-PHY receiver.

google,csis-link:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 7
description: Index of the CSIS link.
maximum: 11
description: Index of the CSIS link (0-7 on gs201).

google,wdma-context:
$ref: /schemas/types.yaml#/definitions/uint32
Expand All @@ -82,6 +70,13 @@ properties:
description:
WDMA input slot the link is routed to; defaults to the context index.

google,image-loch:
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 6
description:
zumapro only. The CSIS core's image logical channel the link writes
its frames through; defaults to 0.

google,lrte-packet-delimiters:
type: boolean
description:
Expand Down Expand Up @@ -132,10 +127,88 @@ required:
- interrupt-names
- phys
- google,csis-link
- google,wdma-context
- google,csis-sysreg
- port

allOf:
- if:
properties:
compatible:
const: google,gs201-csis
then:
properties:
reg:
minItems: 3
items:
- description: the CSIS link registers
- description: the CSIS DMA block's common page (shared by all links)
- description: the CSIS WDMA context (links may share one; they
then stream one at a time)
- description: the EBUF control (shared by all links), bypassed on
the way to the WDMA
reg-names:
minItems: 3
items:
- const: link
- const: dma
- const: wdma
- const: ebuf
interrupts:
items:
- description: link interrupt
- description: WDMA context interrupt
interrupt-names:
items:
- const: link
- const: wdma
clocks:
items:
- description: the camera block's DVFS domain
- description: the bus (INT) DVFS domain
clock-names:
items:
- const: cam
- const: int
google,csis-link:
maximum: 7
google,image-loch: false
required:
- google,wdma-context
- google,csis-sysreg
else:
properties:
reg:
minItems: 1
items:
- description: the CSIS link registers
- description: the ISP front end's CSIS core page, shared by all
links; without it the link runs without DMA
reg-names:
minItems: 1
items:
- const: link
- const: core
interrupts:
minItems: 1
items:
- description: link interrupt
- description: CSIS core interrupt, shared by all links
interrupt-names:
minItems: 1
items:
- const: link
- const: core
clocks:
items:
- description: the INT DVFS domain, the ISP front end clock's rail
- description: the ISP front end's NOC clock
clock-names:
items:
- const: int
- const: fe
google,wdma-context: false
google,csis-sysreg: false
google,ebuf: false

additionalProperties: false

examples:
Expand Down
26 changes: 24 additions & 2 deletions Documentation/devicetree/bindings/media/i2c/samsung,s5kgn1.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -13,22 +13,38 @@ description:
Samsung Bayer CMOS sensors with a MIPI CSI-2 C-PHY or D-PHY output,
controlled over I2C - the S5KGN1 (ISOCELL GN1, 50 MP, dual-pixel phase
detection), the S5K3J1 (10.5 MP, dual-pixel phase detection) and the
S5KGM5 (ISOCELL GM5, 48 MP). Their initialisation and readout modes are
S5KGM5 (ISOCELL GM5, 48 MP), and the S5KGN8 (model 0x08e8, the Pixel 9a
main camera). Their initialisation and readout modes are
loaded from a data file named by firmware-name.

allOf:
- $ref: /schemas/media/video-interface-devices.yaml#
- if:
properties:
compatible:
const: samsung,s5kgn1
enum:
- samsung,s5kgn1
- samsung,s5kgn8
then:
required:
- vaux-supply
- vana-supply
else:
properties:
vaux-supply: false
- if:
properties:
compatible:
const: samsung,s5kgn8
then:
required:
- vaux2-supply
- vdig-supply
properties:
vsw-supply: false
else:
properties:
vaux2-supply: false
- if:
properties:
compatible:
Expand All @@ -52,6 +68,7 @@ properties:
- samsung,s5k3j1
- samsung,s5kgm5
- samsung,s5kgn1
- samsung,s5kgn8

reg:
maxItems: 1
Expand All @@ -71,6 +88,11 @@ properties:
The module's auxiliary supply (2.9 V on the Pixel 7 Pro, shared with
its focus actuator), switched on right after the interface supply.

vaux2-supply:
description:
A second auxiliary supply (2.9 V on the Pixel 9a, shared with the
module's focus actuator and EEPROM), switched on after vaux-supply.

vsw-supply:
description:
A switched module supply, on before the core supplies (S5KGN1) or
Expand Down
11 changes: 7 additions & 4 deletions Documentation/devicetree/bindings/media/i2c/sony,imx386.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -4,22 +4,25 @@
$id: http://devicetree.org/schemas/media/i2c/sony,imx386.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Sony IMX386 image sensor
title: Sony IMX386 and IMX712 image sensors

maintainers:
- Derek Ross <derekross@gmail.com>

description:
Sony IMX386 12 MP Bayer CMOS sensor with a MIPI CSI-2 D-PHY output,
controlled over I2C. Its initialisation and readout modes are loaded from
a data file named by firmware-name.
controlled over I2C, and the IMX712 (the Pixel 9a's ultrawide and front
cameras), which has the same register map. Their initialisation and
readout modes are loaded from a data file named by firmware-name.

allOf:
- $ref: /schemas/media/video-interface-devices.yaml#

properties:
compatible:
const: sony,imx386
enum:
- sony,imx386
- sony,imx712

reg:
maxItems: 1
Expand Down
31 changes: 31 additions & 0 deletions Documentation/devicetree/bindings/mfd/samsung,s2mpg14-pmic.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -35,6 +35,31 @@ properties:

wakeup-source: true

gpio:
type: object
description:
The PMIC's six general purpose pins. On the Pixel 9a one switches
the main camera's digital supply.

properties:
compatible:
const: samsung,s2mpg14-gpio

gpio-controller: true

'#gpio-cells':
const: 2

gpio-line-names:
maxItems: 6

required:
- compatible
- gpio-controller
- '#gpio-cells'

additionalProperties: false

regulators:
type: object
$ref: /schemas/regulator/samsung,s2mpg14-regulator.yaml
Expand All @@ -60,6 +85,12 @@ examples:
google,vgpio2ap-sysreg = <&sysreg_vgpio2ap>;
wakeup-source;

gpio {
compatible = "samsung,s2mpg14-gpio";
gpio-controller;
#gpio-cells = <2>;
};

regulators {
ldo4m {
regulator-name = "touch-avdd";
Expand Down
34 changes: 33 additions & 1 deletion Documentation/devicetree/bindings/mfd/samsung,s2mpg15-pmic.yaml
Original file line number Diff line number Diff line change
Expand Up @@ -13,12 +13,38 @@ description: |
S2MPG15 is the sub PMIC paired with Google's Tensor G4 and is reached
through ACPM. Its LDOs supply the AoC sensors, the GNSS receiver, the
camera sensors and the fingerprint sensor.
Interrupt, meter, GPIO and RTC functions are not described here.
Interrupt, meter and RTC functions are not described here.

properties:
compatible:
const: samsung,s2mpg15-pmic

gpio:
type: object
description:
The PMIC's ten general purpose pins. On the Pixel 9a they enable
the camera buck-boost, the camera PMIC and the cameras' 1.35 V
supply.

properties:
compatible:
const: samsung,s2mpg15-gpio

gpio-controller: true

'#gpio-cells':
const: 2

gpio-line-names:
maxItems: 10

required:
- compatible
- gpio-controller
- '#gpio-cells'

additionalProperties: false

regulators:
type: object
$ref: /schemas/regulator/samsung,s2mpg15-regulator.yaml
Expand All @@ -34,6 +60,12 @@ examples:
pmic-2 {
compatible = "samsung,s2mpg15-pmic";

gpio {
compatible = "samsung,s2mpg15-gpio";
gpio-controller;
#gpio-cells = <2>;
};

regulators {
ldo5s {
regulator-name = "sensor-3v3";
Expand Down
Loading