Retrofit kit that turns a manual pallet jack into a powered, walk-behind unit with a UWB follow-me mode and layered stopping.
An open digital twin starter kit: a small edge gateway that collects readings from lab sensors (FieldNode and others), plus software that ties live data to each project's build123d model so it can be seen and compared with the design calculations.
Two-axis mini heliostat on a mast that redirects sunlight to a fixed target, using a sun-position algorithm with no sun sensors.
A manual compressed earth block press with a lever and toggle linkage, producing stabilized soil blocks for low-carbon walls, with a simple soil test kit to choose mixes.
Bolt-together cargo tricycle whose frame is cut from flat sheet steel by any laser or waterjet shop, uses standard bicycle parts, and ships flat.
An open battery management board for small LiFePO4 packs (4 to 16 cells) with cell balancing, protection and a documented state-of-charge estimate, reusable across the lab's vehicles, storage and field kits.
A sealed, swappable phase-change thermal cartridge in a few standard temperature ranges (cold chain, comfort and hot holding) that stores heat or cold and drops into coolers, cabinets and heat exchangers.
A solar-powered, weatherproof sensor node with a common mounting, power and radio core, so any lab project that needs to measure something outdoors starts from the same tested base instead of a new enclosure and charger each time.
Motor-assisted hand truck on tri-star wheel clusters that climb stairs one step at a time, with a tilt sensor that helps the courier hold the load angle steady.
Wrist-worn IMU band that logs tremor frequency and amplitude continuously, with an open analysis notebook that produces a daily tremor profile.
Open-standard swappable battery pack and wall dock for e-bikes, scooters and cargo trikes, with a defined connector, CAN-based BMS protocol and state-of-health logging.
Batch retort kiln that turns biomass into biochar, with a secondary burner that cleans up the syngas and a jacket that recovers heat for hot water.
Pressure-sensing insole that detects the onset of a freeze and triggers a rhythmic haptic or audio cue.
A hydrogen leak detector and ventilation interlock for small labs, workshops and electrolyzer rooms: it senses hydrogen near the ceiling, runs a fan and cuts the supply when readings rise.
A teaching bench that splits water with a small electrolyzer, stores a few liters of hydrogen at low pressure and runs a fuel cell, with meters so students can measure efficiency at each step. Protected by H2Guard.
Portable Peltier cooler with a phase-change buffer and a temperature logger that raises alerts on excursions.
Frame kit of standard EMT conduit joined by printed or cast nodes, with parametric nodes generated for several shelter sizes.
A clip-on monitor for older machines: current clamp, vibration and temperature sensors report run time, load and early fault signs from lathes, pumps and compressors that have no electronics of their own.
A sound level meter node that records decibel levels only, never audio, to map traffic and nightlife noise.
The lab's documentation and readiness kit released as an open tool: document control, technology readiness level gating, concept renders, drawings and branded PDFs from plain Markdown and Python, usable by any hardware team.
To associate your repository with the design-molecule topic, visit your repo's landing page and select "manage topics."