You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
[DOC] Converting from 2.1.3 to 3.0.0 does not require reboot by user #148
Suggested Change (Expected Documentation)
The page Convert from 2.1.3 to 3.0.0 has "4. Reboot the Board" section and sima-cli command does not ask a user to reboot the board and automatically reboots the boar. So that these lines should be removed.
1. Wait for sima-cli to tell you to reboot the board.
2. Reboot the board.
3. Wait for the board to start.
Thanks for the report, you're right. With --autoflash, sima-cli schedules the reboot into eMMC itself once flashing finishes, so there's nothing to reboot by hand. The offline conversion is the one case with a step: after flashing, sima-cli asks whether to reboot the board now, and you answer y.
Section 4 is now "Check the Board" and covers both cases, in all five languages. Fix: #151.
Activity
dotimothy commentedon Nov 5, 2026
Thanks for the report, you're right. With
--autoflash,sima-clischedules the reboot into eMMC itself once flashing finishes, so there's nothing to reboot by hand. The offline conversion is the one case with a step: after flashing,sima-cliasks whether to reboot the board now, and you answery.Section 4 is now "Check the Board" and covers both cases, in all five languages. Fix: #151.