Skip to content

Settings calculator: the mower goes onto the next pass - #145

Merged
renatorgr merged 1 commit into
mainfrom
fix/aow-settings-mower-next-pass
Nov 15, 2026
Merged

renatorgr merged 1 commit into
mainfrom
fix/aow-settings-mower-next-pass

Conversation

@renatorgr

Copy link
Copy Markdown
Owner

The 3.2 m centre-pivot mower conditioner button in Set up AgOpenWeb from your measures now draws the turn Renato really makes (page version 1.10).

Why
Renato mows with the tractor on the strip it has just cut and the mower swung to the uncut side, the other side of the tractor every pass. So he never skips a pass: the "Sagitta, skip 4" that the button showed would put the tractor on standing grass.

What changes

  • The mower button picks Keyhole, skip 0 (the turn onto the next pass, 3.1 m away), as the plough button picks its K-turn. Every other turn is still in the list.
  • Its note says why, that the tool offset stays 0 (AgOpenWeb's lines are then the tractor's, one pass apart; it draws the coverage behind the tractor, not beside it where the mower cuts), and that AgOpenWeb's own turn onto the next pass needs the headland shown (27.9 m, 9 passes, at the 6.8 m radius): with fewer laps, he turns by hand.
  • No change to the calculation itself. test.js, smoke-test.js, the README section and the day's changelog row updated.

How to test

  1. After the merge, open https://renatorgr.github.io/Boards/aow-settings/ (it shows version 1.10; reload if it still says 1.9).
  2. Press 3.2 m centre-pivot mower conditioner: the table shows radius 6.8 m, Keyhole, skip 0, headland 27.9 m (9 passes), and the drawing lands on the next pass 3.1 m away.

Checked here: node Firmware/simulator/aow-settings/test.js and the page check (smoke-test.js) pass.


Generated by Claude Code

Renato mows with the tractor on the strip it has just cut and the
mower swung to the uncut side, the other side of the tractor every
pass. So no rows are skipped: the mower button now draws the Keyhole
onto the next pass (the preset's turn, as the plough's K-turn), and
its note says why, that the tool offset stays 0 (AgOpenWeb's lines
are then the tractor's; the coverage is drawn behind the tractor) and
that AgOpenWeb's own turn needs a 9-pass headland, so with fewer laps
he turns by hand. Version 1.10.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKEBDGhdtCsfwAKfiW6v2j
@renatorgr
renatorgr marked this pull request as ready for review November 15, 2026 12:44
@renatorgr
renatorgr merged commit b8011ac into main Nov 15, 2026
3 checks passed
@renatorgr
renatorgr deleted the fix/aow-settings-mower-next-pass branch November 15, 2026 12:44
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants