Skip to content

AOW settings page: a button for Renato's Puma 180 CVX - #136

Merged
renatorgr merged 3 commits into
mainfrom
feature/aow-settings-puma
Nov 12, 2026
Merged

renatorgr merged 3 commits into
mainfrom
feature/aow-settings-puma

Conversation

@renatorgr

@renatorgr renatorgr commented Nov 12, 2026 •

Copy link
Copy Markdown
Owner

What changes for Renato

A third tractor button on https://renatorgr.github.io/Boards/aow-settings/: Case IH Puma 180 CVX. The tractor buttons go by power, as Renato asked: Farmall 115C, Maxxum 135, Puma 180 CVX (the page still opens on the Maxxum).

  • 2.88 m wheelbase and 33° of steering from the Puma 165-225 manual: the middle of the rear axle turns on an 8.87 m circle with a 72 in (1.83 m) front track, 10.3 m with 61 in. 2.884 ÷ tan 33° = 4.43 m, half of 8.87; the manual's SAE radii to the outer front tyre (6.10 and 6.59 m) check out with the same angle.
  • 2 m rear track, 650/65 R42 rear tyres (1.91 m tall), the drawbar pin 0.9 m behind the rear axle as his AgOpenWeb profile has it. The front overhang, 1.5 m, is guessed.
  • His front track is 2 m, wider than the manual's 1.83 m: it may steer a little more; the steer wizard will tell (35° gives a 5 m radius).
  • Version 1.5.

With 33° the Puma turns wider than AgOpenWeb's 4 m floor, so the tractor sets the radius: 5.4 m for every implement.

Implement Maxxum (42°) Puma (33°)
8 m front sprayer R 4 m, plain semicircle, 16 m headland (2 passes) R 5.4 m, Sagitta skip 1, 24 m headland (3 passes)
Manure spreader R 6 m (drawbar touches at 65°) R 5.4 m (touches at 82.5°)
Drill Keyhole skip 1, 18.3 m Keyhole skip 2, 18.3 m
Plough (K-turn) 19.2 m 22.4 m

How to test

  1. Press Case IH Puma 180 CVX: the wheelbase reads 2.88, the steering angle 33, the radius 5.4 m; with the 8 m sprayer, front the turn is Sagitta, skip 1 and the headland 24 m (3 passes).
  2. Press 10 m manure spreader: the hitch reads 0.9 and the last row "touches the tyres at 82.5°".
  3. The title reads "version 1.5".

Checks run here: node Firmware/simulator/aow-settings/test.js (all pass, with new Puma checks), python3 .github/scripts/check_changelog.py (OK), the simulator build and the Playwright smoke test ("Simulator pages OK", with the Puma button). Nothing in the Teensy firmware changes.

https://claude.ai/code/session_01VKEBDGhdtCsfwAKfiW6v2j


Generated by Claude Code

The third tractor button fills in the Puma: 2.9 m wheelbase, 2 m rear track,
650/65 R42 rear tyres and the drawbar pin 0.9 m behind the rear axle as his
AgOpenWeb profile has it. Its steering angle is not measured yet: 42 degrees
as on the Maxxum, and the note says any angle over 41 degrees gives the same
turn (AgOpenWeb's 4 m floor). The front overhang is guessed. On the Puma the
spreader's drawbar touches the tyres at 82.5 degrees, so the radius is 5.2 m.
Version 1.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKEBDGhdtCsfwAKfiW6v2j
@renatorgr renatorgr self-assigned this Nov 12, 2026
Renato sent the Puma 165-225 manual's turning figures: 2884 mm wheelbase and
a turnaround circle of 8.87 m at the rear axle's centre with a 72 in front
track (10.3 m with 61 in). That is 33 degrees of steering (29 with the
narrow track); the manual's SAE radii to the outer front tyre, 6.10 and
6.59 m, check out with it. The Puma button now has 2.88 m and 33 degrees,
so the tractor sets the radius, 5.4 m, instead of AgOpenWeb's 4 m floor: the
8 m front sprayer needs Sagitta skip 1 and a 24 m headland on it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKEBDGhdtCsfwAKfiW6v2j
Renato asked for the tractors in order of power: Farmall 115C, Maxxum 135,
Puma 180 CVX. The page still opens on the Maxxum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VKEBDGhdtCsfwAKfiW6v2j
@renatorgr
renatorgr marked this pull request as ready for review November 12, 2026 21:37
@renatorgr
renatorgr merged commit 9333cbd into main Nov 12, 2026
3 checks passed
@renatorgr
renatorgr deleted the feature/aow-settings-puma branch November 12, 2026 21:37
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants