[renatorgr]

Requested by Renato · project thread

What changes

Inside an AgOpenWeb web card a module page runs in a frame without allow-modals (official Docs/ADD_ON_CARDS.md), so the browser's confirm() and prompt() answer "no" at once without showing anything. Every button that asked a question first did nothing in a card: Save and restart (Wi-Fi), Install (a file or GitHub), Restart, the TM171 write and calibrations, the receiver set-up load and baud rate, the UM982 risky commands, the settings Defaults, Go back. Measured in the simulator inside a frame with the card's sandbox: confirm gives false, prompt gives null.

The four pages (Teensy zWebPage.h, XIAO xPage.h, sprayer sPage.h, seed drill dPage.h) now ask with their own box: ask(text) for OK / Cancel, askText(text) for the Wi-Fi password. Same wording as before, dark or light with the page, fits a 480 × 320 card, buttons 44 px high, Enter and Escape work, a tap outside cancels. The handlers behind those buttons are async and wait for the answer; nothing else in the pages changes. 34 places: Teensy 18, XIAO 8, sprayer 3 + the password, seed drill 3 + the password.

• Sprayer 0.10.5 and seed drill 0.2.6: .ino.bin and .merged.bin recompiled here (arduino-cli, esp32 core 3.3.12); the other board of each program compiles too.
• XIAO C3 and S3: .bin and _USB.bin recompiled here, same core.
• Teensy: only zWebPage.h changes (the page text). The .hex is not rebuilt here: the Teensy toolchain cannot be installed in Claude's cloud sessions. The "Teensy firmware" check compiles it on this pull request; Renato exports the .hex from the Arduino IDE before or after merging, as usual.
• Simulator check (smoke-test.js): a browser pop-up on any page now fails the check; the sprayer and Teensy pages are also opened inside a frame with an AgOpenWeb web card's sandbox, where the box must open, fit the card and answer (Cancel and Escape do nothing, OK and Enter go on). Passes locally.
• READMEs: one changelog row each and a note in the page sections.

How to test

1. An AgOpenWeb web card with the sprayer page (or the simulator once this is published): Module → Save and restart the module opens a box with Cancel / OK inside the card. Firmware → Restart: the box asks the password; Cancel does nothing, the password and OK restart the module.
2. The same in a normal browser tab: the questions look the same, no browser pop-ups anywhere.
3. Teensy page (with the new .hex): Firmware → Restart Teensy, IMU → Calibrate, Settings → Defaults: the box opens; OK goes on, Cancel does not.

Checks run here: python3 .github/scripts/check_shared_blocks.py OK (14 blocks), python3 .github/scripts/check_changelog.py OK, node --check on each page's script, python3 Firmware/simulator/build.py _site && node Firmware/simulator/smoke-test.js _site gives "Simulator pages OK".

---

Generated by Claude Code