Skip to content

[PR] pi inline compression is enabled by default (bare pi runs the in-process engine directly; one-click revert available) | pi 内联压缩默认开启(裸 pi 直接跑进程内引擎,可一键退回) - #5491

Merged
ranxianglei merged 9 commits into
masterfrom
2026-11-02_pi-inline-default
Nov 4, 2026

Conversation

@ranxianglei

@ranxianglei ranxianglei commented Nov 1, 2026 •

Copy link
Copy Markdown
Owner

改什么

装了 bili 扩展的裸 pi(什么都不设)现在直接跑进程内引擎压缩,不再自己派生代理进程。恢复 #4571 的姿态,#4687 的「只许手动开启」规则对 pi lane 作废(主人 2026-11-02 拍板)。

人类入口(短旗标,必须放在子命令名前面)

bili -i pi   # ≡ bili pi-inline:强制内联(清继承代理变量+预检扩展+预置变量,不起代理)
bili -s pi   # 钉死代理姿态:子进程预置 BILI_PI_INLINE=0,压过继承的内联变量
  • 旗标在子命令名之后的部分原样转发给客户端(bili pi -i 仍是 pi 自己的参数)
  • opencode 同样支持:bili -i opencode / bili -s opencode
  • 误用直接报错退出 2:不支持的车道、-s pi-inline(它本来就是内联)、-i+-s 同给、旗标没跟客户端

新优先级

kill-switch > /bili/ 改写启动 > 显式内联(bili -i pi / BILI_PI_INLINE=1 / "pi": {"inline": true})
  > 宣告的附着目标(launcher 预置 BILLION_CONTEXT_PROXY/ATTACH)
  > 默认内联(新增)
  > spawn(仅显式退出才到达)

关键设计:宣告的附着目标仍压过默认内联——bili pi 是先起 launcher 代理再拉起 pi 的,它必须继续用那个代理,这次翻转对 bili pi 完全无感;受影响的只有「裸 pi + 插件」这一种启动方式。

不想用内联怎么退回(三选一)

  • bili -s pi(给人用的)
  • BILI_PI_INLINE=0(或 false/no/off;给脚本用的)
  • 配置 "pi": { "inline": false }
  • 任一都恢复旧姿态:有宣告代理就附着,否则自己派生代理
  • 完全关掉不变:BILLION_CONTEXT_PLUGIN=0 / BILI_NATIVE_PI=0

bili pi-inline 保留但不再是一等入口

bili -i pi 就是它的旗标写法,两者完全等价。它还有三件默认翻转替代不了的活:清继承的 BILLION_CONTEXT_PROXY(防止残留附着变量劫持子进程)、预检扩展(没有 wire 兜底时当场报错而不是静默裸跑)、给脚本/别名一个确定语义。

测试与文档

  • tests/cli-parseargs.test.ts:-i pi→pi-inline 映射、-s pi→BILI_PI_INLINE=0 预置、六种误用全部退出 2;
  • tests/pi-native.test.ts:默认姿态断言翻转({} → inline)、空白值折叠、垃圾附着值回落到内联、显式退出逐条钉死;
  • tests/pi-inline-ws.test.ts:真值集测试同步翻转;
  • CONFIGURATION.md/zh-CN 由 website/config-reference/*.yaml 重新生成,docs-sync 不 drift;
  • 本地 41/42 绿,1 例(module evaluation marks the process as a native pi host)在纯净 master 上同样失败(本机环境),CI 为准;
  • tsc --noEmit 干净;opencode 通道默认不动(仍手动开启,旗标可用)。

planNativePi used to fall through to 'spawn' — bare pi with the
extension installed spawned its own proxy (dist/index.js start,
ephemeral port, parent-pid watchdog). Inline was opt-in only since
#4687 reverted the #4571 flip.

This restores the #4571 posture with explicit escape hatches:

  kill-switch > /bili/ launch > explicit inline (BILI_PI_INLINE=1/
  on/yes/TRUE or "pi":{"inline":true}) > ANNOUNCED attach target
  (launcher-set BILLION_CONTEXT_PROXY/ATTACH — bili pi keeps its
  launcher proxy) > inline DEFAULT > spawn (explicit opt-out only)

Opt-out restores the old attach/spawn posture verbatim:
BILI_PI_INLINE=0/false/no/off or "pi":{"inline":false}. Blank
BILI_PI_INLINE="" folds to unset. opencode's lane stays opt-in.

bili pi-inline stays (NOT deprecated): it scrubs inherited
BILLION_CONTEXT_PROXY/BILI_MITM_HOSTS so a stale attach env can't
hijack the child, and preflights extension availability — with no
proxy there is no wire-mode fallback, so a missing extension would
otherwise silently run uncompressed.

Supersedes the #4687 owner decision for the pi lane.
@ranxianglei ranxianglei changed the title pi 内联压缩默认开启(裸 pi 直接跑进程内引擎,可一键退回) [PR] pi 内联压缩默认开启(裸 pi 直接跑进程内引擎,可一键退回) Nov 1, 2026
@github-actions

github-actions Bot commented Nov 1, 2026 •

Copy link
Copy Markdown
Contributor

📦 Built Package Artifact

Branch: 2026-11-02_pi-inline-default (e5cdb09)

Latest build — install this exact version

npm install -g billion-context@0.0.8061-pr.5491.063d114

This exact version is immutable and reproducible. The rolling pr tag tracks the newest test build across all PRs.

Recent builds (commit → version)

commit version build
e5cdb09 billion-context@0.0.8061-pr.5491.063d114 build
8cfb94f billion-context@0.0.7806-pr.5491.a32e8da build
25a5db7 billion-context@0.0.7799-pr.5491.f6c8420 build
6065f3e billion-context@0.0.7792-pr.5491.d2eff0c build
4d94ce6 billion-context@0.0.7789-pr.5491.8efb4a9 build
a61765b billion-context@0.0.7787-pr.5491.f97e485 build
55c1b5e billion-context@0.0.7784-pr.5491.46b3355 build

Download artifact

  1. Download the artifact from the Actions run
  2. Extract the tarball and install:
tar xzf billion-context-pr5491.tgz
npm install -g package

Install instructions are refreshed on each push.

@ranxianglei ranxianglei changed the title [PR] pi 内联压缩默认开启(裸 pi 直接跑进程内引擎,可一键退回) [PR] pi inline compression is enabled by default (bare pi runs the in-process engine directly; one-click revert available) | pi 内联压缩默认开启(裸 pi 直接跑进程内引擎,可一键退回) Nov 1, 2026
Human surface for the inline default: nobody types BILI_PI_INLINE=0.

  bili -i pi   == bili pi-inline (forced inline: env scrub + extension
                 preflight + BILI_PI_INLINE=1 preset, no proxy spawned)
  bili -s pi    proxy posture pinned: child gets BILI_PI_INLINE=0 so an
                 inherited/ambient inline env can't flip it while the
                 launcher proxy runs

Flags must PRECEDE the client name (everything after the client token
is forwarded verbatim — bili pi -i stays pi's own flag). opencode maps
the same way (-i -> opencode-inline, -s -> BILI_OPENCODE_INLINE=0).
Misuse exits 2 with a pointed message: other lanes, -s on the inline
lane, -i+-s together, or a posture without a client.
config-surface-guard holds every CLI flag to the same rule as config
keys: no literal --inline/--server in README/CONFIGURATION → red. The
yaml seeds (and thus the generated CONFIGURATION tables) now spell the
long forms out.
@ranxianglei

Copy link
Copy Markdown
Owner Author

🤖 Powered by ework · qwen3.8-27b

(ai: vllm-qwen/qwen3.8-27b)

查重:不重复——本条即 PR #5491 的镜像(单提交 55c1b5e);检索 open/closed issue 与 PR 无同向「pi 内联默认」在途工作,#4571/#4687 为已关闭历史项(一键车道引入 / 默认翻转收回),正是本次翻转的背景。
标签:pr(既有)+ pi + scope/wiring + p3——pi 车道启动姿态的指令性变更(协议接线层),非缺陷;有一键回退路径,严重度 p3。

状态:定位到上游 PR #5491(branch 2026-11-02_pi-inline-default @ 55c1b5e,单提交,9 文件 ±101 行)。全 diff 已通读:

  • 优先级链与规格逐条一致:kill-switch > /bili/ 改写启动 > 显式内联 > 宣告附着 > 默认内联 > spawn;显式 off(env/file)恢复旧 attach/spawn,空白值折叠为未设置;
  • bili pi 不受影响已在代码层面核实:launcher 给子进程预置 BILLION_CONTEXT_PROXY(src/launcher.ts),attach 仍压过新默认;opencode 通道未动(仍手动开启)。

两个发现:

  1. 文档小笔误(顺手修):重新生成的 BILI_PI_INLINE 描述里,退出示例多了一个引号,渲染成 "pi": {"inline": false"}(应为 {"inline": false})——website/config-reference/env-only.yaml 源头,连带 CONFIGURATION.md/zh-CN。直接补一个标注 commit;
  2. 引用号疑似错位(报 owner,不擅动):commit message 与 CHANGELOG 引用「(kernel authorization request: release v0.1.211 bundles kernel 0.0.176 (#5415 abort-absorb nudge debt) #5428)」,但 GitHub kernel authorization request: release v0.1.211 bundles kernel 0.0.176 (#5415 abort-absorb nudge debt) #5428 是「kernel authorization request: release v0.1.211 bundles kernel 0.0.176」,与本事项无关;同期相邻编号([PR] Auto-update staggered window cap: 48 hours → 7 days | 自动更新错峰窗口上限 48 小时 → 7 天 #5427 stagger 窗口 PR、[PR] release v0.1.211 #5429 release v0.1.211、(ai: anthropic/claude-opus-4-6) The one-click release emergency switch skip_ci_gate does not take effect when the fall | (ai: anthropic/claude-opus-4-6) 一键发版紧急开关 skip_ci_gate 走 fallback 发版 PR 路径时不生效:勾了仍会派发全套 CI 并最多等 60 分钟全绿 #5430/[PR] (ai: anthropic/claude-opus-4-6) fix(release): emergency release flag skip_ci_gate now takes effect on the fallback relea | (ai: anthropic/claude-opus-4-6) fix(release): 紧急发版开关 skip_ci_gate 在 fallback 发版 PR 路径生效(原来被静默忽略,白等最多 60 分钟 CI) #5431 skip_ci_gate)也都对不上,未找到本次翻转对应的来源 issue,PR 正文也没有 Closes 行。请 owner 确认正确来源线程号,我不自行改历史。

验证进行中:本地定向测试(tests/pi-native.test.ts / tests/pi-inline-ws.test.ts)+ typecheck,CI 以远程结果为准。结构化结论随后跟进。

ci-check added 3 commits November 2, 2026 01:58
…view nit)

The regenerated BILI_PI_INLINE entries rendered the opt-out config as
"pi": {"inline": false"} — a stray closing quote inside the JSON
fragment. Fix the seed (env-only.yaml desc_en/desc_zh) and regenerate
CONFIGURATION.md / CONFIGURATION.zh-CN.md.
The misuse test asserted exit code 2 but its per-case message regexes
were never matched against anything (assert.ok(re) is always true).
Capture console.error and assert.match each case's actual message.
…review)

parseArgs records the -s pin in overrides, but the launch path skips the
generic env merge the start/update lanes use, so BILI_PI_INLINE=0 never
reached the child: with an ambient BILI_PI_INLINE=1 (shell export, alias, or
a nested bili session), 'bili -s pi' still flipped onto the inline lane and
the launcher proxy idled — the exact case the flag documents defeating.
applyPosturePins mirrors the env merge for the two posture keys in
runLaunch/runTestPi; a regression test pins the parse-to-env delivery.
@ranxianglei

Copy link
Copy Markdown
Owner Author

🤖 Powered by ework · qwen3.8-27b

(ai: vllm-qwen/qwen3.8-27b)

PR #5491 审核完成——分支上补了三个 commit(最新 head 25a5db7),本地定向验证全绿。

审核做了什么

  1. 主体默认翻转逐项核对:优先级链 kill-switch > /bili/ 改写 > 显式内联 > 宣告附着 > 默认内联 > spawn 与 issue 描述完全一致;代码里确认 bili pi 不受影响(launcher 总是向 pi 子进程宣告代理,attach 压过新默认);opencode 通道未动;单测断言与新语义一致,本地全过。
  2. 发现并直接修掉新增 -s/--server 旗标上的真缺陷:parseArgs 把 pin 记进 overrides,但 launch 路径在 start/update 路径所用的通用 env merge 之前就 return 了,BILI_PI_INLINE=0 根本到不了子进程。实测复现:环境里带 BILI_PI_INLINE=1(shell export、别名、嵌套 bili 会话)时,bili -s pi 仍会走内联、launcher 代理空转——正是这个旗标宣称要挡的场景。修法:applyPosturePins 在 runLaunch/runTestPi 入口镜像 start 路径的 env merge,只投递两个姿态键给子进程;回归测试钉死「pin 到达」与「无旗标无副作用」两个方向。
  3. 两个顺手小修(独立标注 commit):文档示例多一个引号渲染成 {"inline": false"}(已删引号并重新生成文档);新增 -i/-s 的误用测试是无牙断言(assert.ok(正则) 恒真),改成真实捕获 stderr 逐 case 匹配。

合并前需要你拍板的两件事

结构化八问

  1. 是什么问题:指令性功能变更——裸 pi + 插件的默认压缩姿态从「自己派生代理」翻转为「进程内引擎」;评审期间分支又新增了 -i/--inline、-s/--server 命令行旗标。评审中发现新旗标带一个真缺陷。
  2. 什么原因导致的:-s 缺陷的根因是 launch 路径提前 return、跳过了其它路径通用的 env merge,旗标的 pin 到不了子进程;默认翻转本身是设计决策(你 2026-11-02 拍板),不是缺陷。
  3. 影响范围与严重程度:默认翻转覆盖所有裸 pi + 插件启动(issue 描述已披露,有意为之);-s 缺陷仅在环境带 inline 变量时出现,表现为 bili -s pi 失效、子进程走内联而 launcher 代理空转——p2,有绕行(手动 export 0 或配置文件);干净 shell 下因 attach 恰好优先于默认而不触发。
  4. 怎么修复的:applyPosturePins 镜像 start 路径的 env merge,只在 -s 显式解析出这两个键时把它们交给子进程;回归测试双向钉死;两个小修独立成 labeled commit。
  5. 是否有回归问题:逐项过过——kill-switch、/bili/ 改写、显式 on/off、宣告附着、垃圾值回落的行为全部不变(单测钉住);opencode 通道不动;bili pi 无感(宣告 attach 压过新默认,代码已验证);-i/-s 是新 token,master 此前不存在,与既有调用无碰撞;launcher 改动仅在 -s 时生效,无 -s 零变化。
  6. 是否破坏缓存:不涉及——启动期姿态决策,不碰缓存/重试/游标/去重逻辑。
  7. 是否改了设计方向:是,有意变更——裸 pi 默认 spawn→inline(旧值→新值如上披露);宣告附着仍压过默认,bili pi 透明;opencode 保持手动。新增方向:全局 -i/-s 旗标——与 PR 正文「不建议、另开 PR」的表述矛盾,待你确认。
  8. 是否引入了新的配置:无新配置键/env——既有 BILI_PI_INLINE/pi.inline 的语义翻转(未设置时 off→inline),CONFIGURATION.md/zh-CN/CHANGELOG 已同步;新增 CLI 短旗标 -i/--inline、-s/--server(须置于子命令前,仅对 pi/opencode 生效)。

判定:代码侧可合(本地定向验证全绿:cli-parseargs 11/11、pi-native 19/19、pi-inline-ws 4/4、launcher-pi-inline 2/2,typecheck 干净);全套件以远程 CI 为准,正在最新 head 上跑,结果出来我跟进一句。请先处理上面两件事。

ci-check added 2 commits November 2, 2026 02:47
Summary line still said spawn (DEFAULT); after the #5428 flip the default is inline and spawn only via explicit opt-out.
…review)

End-to-end complement to the unit-level parse-to-env test: runLaunch with an ambient BILI_PI_INLINE=1 must deliver the -s pin (overrides BILI_PI_INLINE="0") into the ACTUAL child env through stripInheritedProxy/buildPiEnv; control case proves an unpinned launch still inherits the ambient value.

@ranxianglei ranxianglei left a comment

Copy link
Copy Markdown
Owner Author

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

(ai: vllm-qwen/qwen3.8-27b)

APPROVE — 方向、实现、测试均通过;review 中发现 4 处问题已全部在分支上顺手修掉(见下)。

方向关:按 owner 决策 2026-11-02 把 pi 车道恢复为内联默认(复原 #4571/#4669 姿态,废止 #4687 的 opt-in 规则)。历史核对:#3278 引入 inline lane → #4571 曾默认开启 → #4687 按当时「不改默认值」规则回退 opt-in → 本次 owner 明确重新拍板。方向成立,这是产品姿态决策,不是症状级修补。

回归审查(既有行为清单):

  • bili pi launcher 姿态(launcher 经 BILLION_CONTEXT_PROXY 宣告 attach):保持 —— attach 仍压过新默认(决策梯顺序未动,既有测试钉住);
  • 显式开(BILI_PI_INLINE=1/on/yes/TRUE 或 config "pi":{"inline":true}):保持;
  • 显式关(env 0/false/no/off 或 config false):保持,truth table 双向行齐全;
  • kill switches(BILLION_CONTEXT_PLUGIN=0 / BILI_NATIVE_PI=0 / BILI_PROVIDER_REWRITES):保持,仍是最高优先;
  • opencode 车道:-i/-s 可用但默认不变(仍 opt-in):保持;
  • 有意变更(披露,旧值→新值):无任何 env/file/announce 的裸 pi —— 旧:spawn 自己的代理进程 → 新:进程内 inline 引擎直接压缩;空/垃圾 BILLION_CONTEXT_PROXY 的兜底从 spawn 改为 inline(yaml 描述与 CHANGELOG 均已写明)。回退路径三条(bili -s pi、BILI_PI_INLINE=0、config false)均有文档+测试。

Review 发现(全部已处置):

  1. bili -s pi 的 pin 到不了子进程 env(真缺陷):cli.ts 把 -s pin 记进 overrides,但 launch 路径跳过 start/update 用的通用 env merge,而 stripInheritedProxy 不碰 BILI_PI_INLINE——用户若 export 了 BILI_PI_INLINE=1,bili -s pi 照样翻进 inline 车道、launcher 代理闲置(我用捕获子进程 env 的 harness 实测确认)。修复:applyPosturePins 在 runLaunch/runTestPi 镜像该 env merge(commit 25a5db739——另一位 reviewer 并发发现并先推上分支,我独立复现后核对其修法等价且覆盖面更广[含 runTestPi],采纳其版本);我另补了端到端回归测试钉死 parse→子进程 env 全链路(含对照组)。
  2. misuse 测试的正则从未被断言(assert.ok(re) 恒真,等于没测消息)→ 捕获 console.error 逐条 assert.match(commit 6065f3eee,并发发现,与我写的修法等价,已核对)。
  3. 文档 JSON 片段缺右引号 {"inline": false"} → 修 yaml 源并重新生成两份 md(commit 9dd6576ff,与我的修复字节一致)。
  4. planNativePi docstring 优先级行陈旧(仍写 spawn (DEFAULT),翻转后默认已是 inline)→ 改为 inline (DEFAULT since #5428) > spawn。

已顺手修:planNativePi docstring 优先级行与翻转后语义不符 + commit 25f908d
已顺手补:-s pin 端到端回归测试(parse→stripInheritedProxy→buildPiEnv→真实子进程 env,含「无 -s 时继承值保留」对照组)+ commit 8cfb94f

测试有效性:planNativePi truth table 为新默认补齐双向行(显式关/env-off 压过 file-true/垃圾 attach 兜底等);misuse 用例现在真断言消息;launcher e2e 钉住 -s pin 投递。新行为两个方向都有牙,回归时抓得住。

结构化八问:

  1. 是什么问题:产品姿态调整——裸 pi 默认改走进程内 inline 压缩(不再自起代理进程),并给人类入口 -i/-s。
  2. 什么原因导致的:默认值历史反复(#4571 默认开 → #4687 回退 opt-in),本次 owner 明确重新拍板恢复默认开。
  3. 影响范围与严重程度:所有无配置裸跑 pi 的用户——模型流量路径从「pi→独立 bili 代理进程→上游」变为「pi 进程内引擎」;codex Responses WS 桥失败时该通道降级直连(打 warn),HTTP 压缩不受影响。无数据丢失面,回退路径完整且已测。
  4. 怎么修复的:在 planNativePi 决策梯加一档「默认 inline」(仅当 env+file 均未设置时落到),配 CLI 姿态 flag 与文档同步;不动既有各档的顺序与语义。
  5. 是否有回归问题:无——逐项清点见上(attach/explicit-inline/off/kill-switch/opencode 全部保持);高危模式逐条过:无语义漂移(只新增一档,不挪既有档序)、无 fail-fast 变吞错、无阈值/时序/输出格式变化。
  6. 是否破坏缓存:否——前缀缓存/cache ref 逻辑零触碰;inline 车道的缓存行为与其此前默认开启期(#4571 时代)一致。
  7. 是否改了设计方向:无架构转向——inline 机制本身是既有的(#3278),只移动默认档位;单写者安装契约不受影响。
  8. 是否引入新配置:无新 env/config key——只是既有 BILI_PI_INLINE / pi.inline 的 unset 语义从 spawn 变为 inline(显式值语义不变);-i/-s 是 CLI flag,非配置项。

CI:前头 4d94ce6 全量套件绿;我追加的两个 commit 零 src 改动(docstring + 测试文件),本地定向套件 383/383 全绿 + typecheck 干净;8cfb94f8d 上静态门禁/guard 均已绿,其余分片在队列中排队(failed=0,无失败)。

结论:可合,待 CI 队列排空转全绿即可由人合并。

@ranxianglei

Copy link
Copy Markdown
Owner Author

🤖 Powered by ework · qwen3.8-27b

PR #5491 review 完成:判定可合(APPROVE,自审限制下以 review comment 提交,https://github.com/ranxianglei/billion-context/pull/5491#pullrequestreview-5729959597);发现 4 处问题全部在分支上修掉——-s pin 到不了子进程 env(真缺陷)/misuse 测试恒真断言/文档 JSON 缺引号由另一 reviewer 并发先修(已核对等价并采纳),docstring 陈旧 + 端到端回归测试由我补(commit 25f908d、8cfb94f8d),head 现为 8cfb94f,CI 无失败(静态门禁全绿,其余分片排队中)。

@ranxianglei

Copy link
Copy Markdown
Owner Author

解决冲突 重新review

…esolution)

Conflicts resolved (both sides kept):
- CHANGELOG.md: pi-inline default-on entry (#5428) + watermark fastpath GA entry (#5403/#5418)
- tests/cli-parseargs.test.ts: #5428/#5491 posture-flag tests + #5606 informational-flag tests
- CONFIGURATION.md / CONFIGURATION.zh-CN.md: regenerated from merged yaml seeds via
  tools/gen-config-docs.mjs (keeps BILI_PERSONA_SPLIT row + new pi.inline default row)
@ranxianglei

Copy link
Copy Markdown
Owner Author

🤖 Powered by ework · qwen3.8-27b

(ai: vllm-qwen/qwen3.8-27b)

冲突已解决并推送,PR 恢复可合并。七问摘要:

1. 是什么问题:PR #5491(pi 内联压缩默认开启 + -i/-s 姿态旗标)与 master 冲突(merge state dirty)——master 期间前进了 162 个提交,其中 #5606(CLI 信息旗标 --help/--version 优先于子命令分发)与本 PR 同改 src/cli.ts、tests/cli-parseargs.test.ts,CHANGELOG 与 CONFIGURATION 文档也在同一位置各自新增了行。

2. 什么原因导致的:两侧在相同文件的相同区域独立新增内容(典型并行开发文本冲突),不是逻辑矛盾——#5606 管「信息旗标何时生效」,本 PR 管「-i/-s 姿态旗标」,互不否定。

3. 影响范围与严重程度:只有合并状态被卡(dirty 不可合并);两侧改动都是纯增量,无数据/语义损坏风险。

4. 怎么修复的:选 merge(不 rebase)——保留分支上 8 个原始提交的作者与历史,推送是普通前推、无需 force-push。4 个冲突文件全部按「两侧都保留」解:

忠实度证明:git diff origin/master -- <自动合并的源码/yaml 文件> 与本 PR 相对 merge-base 的原始 diff 逐文件一致(cli.ts +49、config.ts ±15、launcher.ts +14、env-only.yaml ±6、server.yaml ±6)——即合并树 = master ∪ PR 改动,任何一侧的内容都没丢。

5. 是否有回归问题:本地 npm run typecheck 通过;定向测试 cli-parseargs + launcher + pi-native + pi-inline-ws 共 383 例全绿(382 pass / 1 skip / 0 fail)——双方新增的全部测试在同一棵树里同时跑通,证明 #5606 的信息旗标优先规则与 -i/-s 姿态旗标共存无碍。全量回归按纪律交给远程 CI。

6. 缓存/CI 现状:已推送 e5cdb0992(8cfb94f..e5cdb09)。GitHub 单次读取确认:head=e5cdb0992、mergeable=true、state=behind(不再是 dirty;behind 只是 master 又前进了,不阻塞合并)。新 head 的 CI 已被 push 触发,镜像缓存刷新后逐项可见;若红了按 CI 协调流程处理(先查 #4599 再动手)。

7. 剩余事项与待决策:① 全量 CI 结果等远程把关;② 关于「重新 review」:本次合并本身未改变 PR 的任何语义(第 4 点的 diff 一致性证明),master 162 个提交与本 PR 的交互面已由定向测试覆盖——正式八问 review 请按新 head e5cdb0992 执行即可。无需要决策的事项。

@ranxianglei
ranxianglei merged commit 1b7a661 into master Nov 4, 2026
49 checks passed
@github-actions

github-actions Bot commented Nov 4, 2026

Copy link
Copy Markdown
Contributor

📦 Merged Build Published

This merge to master was published as 0.0.1027-master.1b7a661 (rolling master tag).

npm install -g billion-context@0.0.1027-master.1b7a661  # this exact build
npm install -g billion-context@master  # always the newest merged build

npm view billion-context@master prints the current version at any time.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant