A small standalone aircraft radar on a 4.3″ ESP32-S3 display. No Raspberry Pi needed. Designed and Created by Project Moon Pi · www.projectmoonpi.com · Help: support@projectmoonpi.com
The Mini joins your Wi-Fi, fetches live aircraft from adsb.fi's open data every five seconds, and draws them on an ATC-style scope with a sweeping beam. It's a reduced SkyScope sized for a microcontroller.
Early release. 1.1.4 builds cleanly and its screen has been checked with the same drawing code running on a computer (the picture above), but it has not yet been run on the board itself. If something doesn't work, please email support@projectmoonpi.com or open an issue.
- SkyScope Mini Guide (PDF): installing, Wi-Fi setup, location, touch controls, troubleshooting.
- The same guide as a web page: docs/guide.html.
- Live aircraft from adsb.fi (up to 150), moved smoothly between updates
- Silhouettes or triangles, colour by kind, speed lines, tags that avoid each other, the sweep
- Runways and extended centrelines at major airports
- Filters by kind (airliners, business jets, GA, helicopters, military, other) and altitude block (the lowest block counts 10,000 ft from the ground, so it works over high country like Denver)
- Emergency squawks (7500/7600/7700) flash and always show
- Nearest-aircraft card (or tap an aircraft to select it), list, UTC clock
- Touch −/+ range buttons: 5–100 km, 2–50 mi or 2–40 nm
- Settings page at
http://skyscope-mini.local
For the full feature set (airspace, SIDs/STARs, photos, logos, your own SDR), run SkyScope on a Pi and add a SkyScope Satellite display.
| Item | Details |
|---|---|
| Display | Sunton ESP32-8048S043: ESP32-S3 (16 MB flash, 8 MB PSRAM), 4.3″ 800×480, GT911 capacitive touch |
| Cable and power | USB-C data cable; any 5 V USB supply of 1 A or more |
| Network | 2.4 GHz Wi-Fi with internet access |
| Case (optional) | The 3D-printable radar-console desk case in skyscope-satellite/case fits the Mini too |
From a browser (no tools needed): download skyscope-mini-1.1.4.bin from the
latest release (also on www.projectmoonpi.com/downloads),
open the ESP web flasher in Chrome or
Edge, connect to the board, and program the file at address 0x0. If no port
shows up, hold BOOT, tap RST, release BOOT and connect again.
From source with PlatformIO:
git clone https://github.com/projectmoonpi/skyscope-mini.git
cd skyscope-mini
pio run -t upload- Join the Wi-Fi network SkyScope-Mini-Setup from a phone; the setup page opens. Choose your network and enter its password.
- Open http://skyscope-mini.local (or the address at the bottom right of the screen) and enter your latitude and longitude. It starts centred on Amsterdam.
- Save. Hold BOOT for 3 seconds any time to set up Wi-Fi again.
Board revisions differ. If the screen is blank, shifted or the wrong colours,
or touch doesn't respond, set the wiring on the Display hardware page
(http://skyscope-mini.local/hardware) without rebuilding anything:
- the 16 RGB data lines, DE/VSYNC/HSYNC/PCLK and the backlight pin
- pixel clock, porches, sync polarities
- touch chip (GT911 or none), its pins and address
With a blank screen, hold BOOT 3 s and let go to start Wi-Fi setup, join SkyScope-Mini-Setup, and press Display hardware there. Pins are checked before saving (GPIO 1–21 or 38–48, no duplicates). Hold BOOT 10 s, or press Restore defaults, to go back to the ESP32-8048S043 wiring.
| File | Does |
|---|---|
src/mini.cpp |
Saved settings; fetches adsb.fi on its own task, double-buffered |
src/mini_core.cpp |
Ranges and rings, aircraft classification (as SkyScope), reading adsb.fi's JSON |
src/render.cpp |
Draws the screen: runways, sweep, aircraft, labels, card, list, buttons |
src/scope.cpp |
Scope drawing shared with SkyScope Satellite |
src/device.cpp |
Splash, Wi-Fi setup, BOOT button, mDNS |
src/main.cpp |
Start-up, touch, settings page |
include/board.h, board_pins.h |
The display driver and its default wiring |
src/hardware.cpp |
The Display hardware page; the wiring saved in flash |
include/shapes.h |
Aircraft silhouettes, generated from SkyScope by tools/gen_shapes.py |
src/data/ |
Major-airport runways from OurAirports (tools/build_large_airports.py) |
tools/preview/ |
Builds the drawing code on a computer and renders a frame to an image |
- Help installing or using the Mini, or a bug to report: email support@projectmoonpi.com (a photo of the screen and the board's back helps), or see the support page. You can also open an issue on GitHub.
- Anything else (business, partnerships, the press): sales@projectmoonpi.com.
- Website: www.projectmoonpi.com
MIT licence (see LICENSE). SkyScope grew out of ESP32-Plane-Radar by MatixYo (MIT), and the runway table tool comes from it. Aircraft data: adsb.fi open data. Airports: OurAirports (public domain). Ground elevation: Open-Meteo (Copernicus DEM GLO-90, CC BY 4.0). Libraries: LovyanGFX (FreeBSD), with its GNU FreeFont text (GPL with font exception); WiFiManager (MIT); ArduinoJson (MIT); the Espressif Arduino core (LGPL 2.1), built with PlatformIO (Apache 2.0). Built with Claude Code (Anthropic): designed, written and tested with Claude. The Project Moon Pi name and logo are not covered by the licence. Not for navigation.

