Bump the python-dependencies group across 1 directory with 12 updates

[dependabot]

Updates the requirements on numpy, pandas, scipy, scikit-learn, cvxpy, python-dotenv, matplotlib, plotly, streamlit, ipywidgets, pytest and mypy to permit the latest version.
Updates numpy to 2.5.3

Release notes

Sourced from numpy's releases.

v2.5.3 (Sep 6, 2026)

NumPy 2.5.3 Release Notes

The NumPy 2.5.3 is a patch release that fixes bugs discovered after the 2.5.2 release. Apart from the usual bug and maintenance work, there are a number of StringDType related fixes for problems discovered during the ongoing string work in the main branch.

This release supports Python versions 3.12-3.15

Changes

• Casting a fixed-width byte string array (np.bytes_) to StringDType now raises TypeError when the bytes are not valid UTF-8. Previously the invalid bytes were stored as-is and later caused undefined behavior in string operations.

  (gh-32296)

• MaskedArray._fill_value would become stale when ufuncs that change dtype left the result holding a fill_value typed for the old dtype. The mismatch was silent until something later called _check_fill_value, such as .view(), and then a TypeError would be raised. Now, when the copied fill_value is no longer valid for the new dtype, fall back to the default fill_value for that dtype instead of propagating the stale value. This may raise a ComplexWarning if the fill_value is complex and the new dtype is real.

  (gh-32423)

Contributors

A total of 9 people contributed to this release. People with a "+" by their names contributed a patch for the first time.

• Charles Harris
• Iason Krommydas
• James Davies +
• Joren Hammudoglu
• Maanas Arora
• Matti Picus
• Nathan Goldbaum
• Shikhar Goel +
• Yeonho Kim +

Pull requests merged

A total of 27 pull requests were merged for this release.

• #32235: MAINT: Prepare 2.5.x for further development

... (truncated)

Changelog

Sourced from numpy's changelog.

This is a walkthrough of the NumPy 2.4.0 release on Linux, which will be the first feature release using the numpy/numpy-release <https://github.com/numpy/numpy-release>__ repository.

The commands can be copied into the command line, but be sure to replace 2.4.0 with the correct version. This should be read together with the :ref:general release guide <prepare_release>.

Facility preparation

Before beginning to make a release, use the requirements/*_requirements.txt files to ensure that you have the needed software. Most software can be installed with pip, but some will require apt-get, dnf, or whatever your system uses for software. You will also need a GitHub personal access token (PAT) to push the documentation. There are a few ways to streamline things:

• Git can be set up to use a keyring to store your GitHub personal access token. Search online for the details.

Prior to release

Add/drop Python versions

When adding or dropping Python versions, multiple config and CI files need to be edited in addition to changing the minimum version in pyproject.toml. Make these changes in an ordinary PR against main and backport if necessary. We currently release wheels for new Python versions after the first Python RC once manylinux and cibuildwheel support that new Python version.

Backport pull requests

Changes that have been marked for this release must be backported to the maintenance/2.4.x branch.

Update 2.4.0 milestones

Look at the issues/prs with 2.4.0 milestones and either push them off to a later version, or maybe remove the milestone. You may need to add a milestone.

Check the numpy-release repo

... (truncated)

Commits

• dd88c0c Merge pull request #32511 from charris/prepare-2.5.3
• edcac6a REL: Prepare for the NumPy 2.5.3 release
• fd4d908 Merge pull request #32509 from charris/backport-32496
• 65bb1da BUG: fix crash in ufunc.resolve_dtypes with a Python scalar type (#32496)
• 294956e Merge pull request #32506 from charris/backport-32503
• 26428d9 DOC: fix scipy docs links in intersphinx mapping (#32507)
• 5fab1cb DOC: use static scipy doc site for intershpinx (#32503)
• 7beed2f Merge pull request #32481 from ngoldbaum/stringdtype-backport
• 8972f70 Merge pull request #32478 from charris/backport-32466
• ab1b589 Merge pull request #32477 from charris/backport-32423
• Additional commits viewable in compare view

Updates pandas to 3.0.5

Release notes

Sourced from pandas's releases.

pandas 3.0.5

We are pleased to announce the release of pandas 3.0.5. This is a patch release in the 3.0.x series and includes some regression fixes and bug fixes. We recommend that all users of the 3.0.x series upgrade to this version.

See the full whatsnew for a list of all the changes.

Pandas 3.0 supports Python 3.11 and higher. The release can be installed from PyPI:

python -m pip install --upgrade pandas==3.0.*

Or from conda-forge

conda install -c conda-forge pandas=3.0

Please report any issues with the release on the pandas issue tracker.

Thanks to all the contributors who made this release possible.

Commits

• e68db09 RLS: 3.0.5
• 0697623 Backport PR #66428: DOC: update whatsnew for 3.0.5 (#66430)
• 5d846d0 Backport PR #66090 on branch 3.0.x (BLD: exclude numpy 2.5.0 when building wh...
• bef7a2b Backport PR #66169 on branch 3.0.x (CI: Fix pyarrow-nightly job (stale nightl...
• 8188eb1 RLS: 3.0.4 (#66079)
• bd35f15 [3.0.x] BUG: fix CoW issue in eval() (#66072)
• 6195872 [backport 3.0.x] BUG: anchor whole alternation in Series.str.match for PyArro...
• 70313be Backport PR #66051 on branch 3.0.x (BUG: fix regression in DataFrame setitem ...
• 57ed3e2 [backport 3.0.x] Bump pypa/cibuildwheel from 3.4.1 to 4.1.0 (#65934) (#66026)
• f9693fc [backport 3.0.x] BUG(pandas 3.0 regression): drop(index=...) doesn't accept N...
• Additional commits viewable in compare view

Updates scipy to 1.18.1

Release notes

Sourced from scipy's releases.

SciPy 1.18.1 Release Notes

SciPy 1.18.1 is a bug-fix release with no new features compared to 1.18.0. This release includes binaries on PyPI for Python 3.15, and the minimum required version of the GCC toolchain has been increased to 10.3.0.

Authors

• Name (commits)
• Wasim Akram (2) +
• Jake Bowhay (1)
• Michael Bratsch (1)
• Dietrich Brunn (1)
• Evgeni Burovski (1)
• Aadya Chinubhai (1)
• Lucas Colley (3)
• Tekin Ertekin (1) +
• Fuyugithub (2) +
• Ralf Gommers (11)
• Joren Hammudoglu (1)
• Ijtihed Kilani (1) +
• Andrew Nelson (2)
• Ilhan Polat (1)
• Tyler Reddy (39)
• romao05 (1) +
• Michael Simacek (1) +
• Jacob Vanderplas (2)

A total of 18 people contributed to this release. People with a "+" by their names contributed a patch for the first time. This list of names is automatically generated, and may not be fully complete.

Note that the source and binary assets associated with this release were published to PyPI using trusted publishing, and so the trusted assets and their hashes are made available more securely at https://pypi.org/project/scipy/1.18.1/ rather than providing them here in a less secure manner.

A complete list of issues and pull requests associated with this release is available in the associated README.txt.

Commits

• e4e854e REL: SciPy 1.18.1 rel commit
• 3c8e5f8 BLD, MAINT: pythran bounds for 1.18.1 (#25978)
• 54c0f95 BLD, MAINT: pythran bounds for 1.18.1
• 45a355d Merge pull request #25884 from tylerjereddy/treddy_backports_1.18.1
• a717e28 DOC: PR 25884 revisions
• bb489c0 DOC: PR 25884 revisions
• 09bca24 BLD: package: pin meson on win-64 to avoid clang-cl bug (#25913)
• 095fe56 DOC, BLD: PR 25884 revisions
• e66ea64 DOC: update minimum GCC version in toolchain roadmap
• c021653 TST: tolerance bumps and skips on 32-bit platforms
• Additional commits viewable in compare view

Updates scikit-learn to 1.9.1

Release notes

Sourced from scikit-learn's releases.

Scikit-learn 1.9.1

We're happy to announce the 1.9.1 release.

This release contains a few bug fixes and is the first version supporting Python 3.15.

You can see the changelog here: https://scikit-learn.org/stable/whats_new/v1.9.html#version-1-9-1

You can upgrade with pip as usual:

pip install -U scikit-learn

The conda-forge builds can be installed using:

conda install -c conda-forge scikit-learn

Thanks to everyone who contributed to this release !

Commits

• 866c0f5 generate changelog
• 12f135f update upper bounds
• 43ff2f2 bump version
• b851524 DOC Mark dev index as orphan (#34916)
• 01d56d4 DOC Fix wikipedia principal eigenvector example references (#34915)
• b86a1e2 🔒 🤖 CI Update lock files for array-api CI build(s) 🔒 🤖 ...
• d282698 🔒 🤖 CI Update lock files for main CI build(s) 🔒 🤖 (#34897)
• eb34279 🔒 🤖 CI Update lock files for free-threaded CI build(s) 🔒 :rob...
• 7581303 FIX: Fix QuantileTransformer(ignore_implicit_zeros=True) sub-sampling behav...
• ac47f4d FIX: avoid EfficiencyWarning in OPTICS with metric='precomputed' (#34692)
• Additional commits viewable in compare view

Updates cvxpy to 1.9.2

Release notes

Sourced from cvxpy's releases.

CVXPY 1.9.2

This patch release contains bug fixes and follow-up improvements for CVXPY 1.9.

Summary

This new release totaled 34 PRs from 7 contributors.

• @​ghackebeil | #3363
• @​govindchari | #3411
• @​Iroy30 | #3351, #3364
• @​PrathamDesai07 | #3409
• @​PTNobel | #3349, #3352, #3355, #3356, #3357, #3358, #3370, #3388, #3392, #3394, #3396, #3397, #3399, #3401, #3405, #3406, #3407, #3412, #3413, #3414, #3421
• @​SteveDiamond | #3376, #3377, #3379, #3380, #3381, #3382
• @​WilliamZhang20 | #3360, #3415

Commits

• 7cb26d3 Release v1.9.2
• bcad203 Patch/1.9.2
• fac9f6f CI: install Moreau from PyPI instead of private Fury index
• a89e5cf Fix N-D parametric matmul in the COO and SCIPY canonicalization backends (#3401)
• c6ac6c7 Add missing numpy_numeric decorator to entr.numeric (#3379)
• 6ba794a Fix scrambled ExpCone duals for matrix-shaped arguments (#3377)
• eeddbb7 fix cone head lb (#3364)
• 20ae79d Dedup identical subtrees in Dcp2Cone canonicalization (#3355)
• eeb13c3 Updates to the wishlist (#3421)
• 951e8b8 Fix factor-2 error in Hermitian PSD constraint dual recovery (#3388)
• Additional commits viewable in compare view

Updates python-dotenv to 1.2.3

Release notes

Sourced from python-dotenv's releases.

v1.2.3

Fixed

• Strip a leading UTF-8 BOM from .env file contents so the first variable is no longer silently lost when the file is saved with BOM (e.g. by some JetBrains IDEs on Windows) by [@​h1whelan] in #640
• set_key now escapes backslashes, so values containing them (Windows paths, regular expressions) survive a write/read round-trip. Quoted values ending in an escaped backslash are no longer mis-parsed as an escaped quote, which used to swallow the following lines by [@​dchaudhari7177] in #680
• dotenv run now prints a friendly error instead of a traceback when no command is given by [@​bbc2] in #606
• Cache the parsed result for empty .env files so repeated dotenv_values/load_dotenv calls no longer re-read the file by [@​ReinerBRO] in #638

Changelog

Sourced from python-dotenv's changelog.

[1.2.3] - 2026-08-16

Fixed

• Strip a leading UTF-8 BOM from .env file contents so the first variable is no longer silently lost when the file is saved with BOM (e.g. by some JetBrains IDEs on Windows) by [@​h1whelan] in #640
• set_key now escapes backslashes, so values containing them (Windows paths, regular expressions) survive a write/read round-trip. Quoted values ending in an escaped backslash are no longer mis-parsed as an escaped quote, which used to swallow the following lines by [@​dchaudhari7177] in #680
• dotenv run now prints a friendly error instead of a traceback when no command is given by [@​bbc2] in #606
• Cache the parsed result for empty .env files so repeated dotenv_values/load_dotenv calls no longer re-read the file by [@​ReinerBRO] in #638

[1.2.2] - 2026-03-01

Added

• Support for Python 3.14, including the free-threaded (3.14t) build. (#588)

Changed

• The dotenv run command now forwards flags directly to the specified command by [@​bbc2] in #607
• Improved documentation clarity regarding override behavior and the reference page.
• Updated PyPy support to version 3.11.
• Documentation for FIFO file support.
• Dropped Support for Python 3.9.

Fixed

• Improved set_key and unset_key behavior when interacting with symlinks by [@​bbc2] in [790c5c0]
• Corrected the license specifier and added missing Python 3.14 classifiers in package metadata by [@​JYOuyang] in #590

Breaking Changes

• dotenv.set_key and dotenv.unset_key used to follow symlinks in some situations. This is no longer the case. For that behavior to be restored in all cases, follow_symlinks=True should be used.

• In the CLI, set and unset used to follow symlinks in some situations. This is no longer the case.

• dotenv.set_key, dotenv.unset_key and the CLI commands set and unset used to reset the file mode of the modified .env file to 0o600 in some situations. This is no longer the case: The original mode of the file is now preserved. Is the file needed to be created or wasn't a regular file, mode 0o600 is used.

[1.2.1] - 2025-10-26

• Move more config to pyproject.toml, removed setup.cfg
• Add support for reading .env from FIFOs (Unix) by [@​sidharth-sudhir] in #586

[1.2.0] - 2025-10-26

... (truncated)

Commits

• 49515af Bump version: 1.2.2 → 1.2.3
• 8ac846f chore: add release runbook (RELEASING.md) and make release target
• bb31c94 docs: add 1.2.3 release notes (#606, #638, #680)
• f7b18d9 fix: round-trip backslashes through set_key (#680)
• 751f8c1 ci(deps): bump actions/checkout from 6.0.2 to 6.0.3 in the github-actions gro...
• f1937b6 chore(deps): update mkdocs-include-markdown-plugin requirement from >=6.0.0 t...
• 45b9372 chore(deps): update pytest requirement from >=3.9 to >=9.0.3 (#653)
• 72896e9 docs: fix broken mkdocs link in CONTRIBUTING.md (#636)
• 72754a1 ci(deps): bump peaceiris/actions-gh-pages from 4.0.0 to 4.1.0 in the github-a...
• 078325e ci(security): harden CI/CD supply chain with SHA pinning and least-privilege ...
• Additional commits viewable in compare view

Updates matplotlib to 3.11.2

Release notes

Sourced from matplotlib's releases.

REL: v3.11.2

This is the second bugfix release of the 3.11.x series.

This release contains several bug-fixes and adjustments:

• Speed up RGBA-stage image resampling
• Fix hexbin clipping in PDF output
• Fix \text with internal braces
• Fix some crashes and make some checks more robust to unlikely cases
• Fix frame skew when saving GIF animations with PillowWriter
• Fix HiDPI handling in Qt toolbar and WebAgg embeddings
• Fix ResizeEvent handling for TextBox
• Fix bug with PGF hatch linewidth and color
• Fix a bug with drawing an empty Collection
• Fix incorrect glyphs in Cairo backends
• Improve build system to prevent conflicts between wheels and system libraries

Commits

• d3ca917 REL: v3.11.2
• b76fea9 DOC: Set current version to 3.11.2
• 39c7f06 DOC: Prepare GitHub stats for 3.11.2
• 5dd13e3 Merge branch 'v3.11.1-doc' into release-3.11.2
• aa484be Merge branch 'v3.11.0-doc' into v3.11.1-doc
• 0e10f83 Merge pull request #32330 from meeseeksmachine/auto-backport-of-pr-32324-on-v...
• ebe947b Backport PR #32324: Don't force any diagnostics to be errors in bundled Harfbuzz
• 8f4b7c5 Merge pull request #32322 from meeseeksmachine/auto-backport-of-pr-32321-on-v...
• 93278ad Backport PR #32321: DOC: correct note about PyOS_InputHook
• b0aee78 Merge pull request #32319 from meeseeksmachine/auto-backport-of-pr-32305-on-v...
• Additional commits viewable in compare view

Updates plotly to 7.0.0

Release notes

Sourced from plotly's releases.

v7.0.0

Fixed

• Fix hex_to_rgb parsing of 3-digit shorthand hexadecimal colors such as #FFF [#5662], with thanks to @​genrichez for the contribution!
• Improve px.*_map() auto-fitting behavior when zoom and center are not specified [#5686]
• Add <!doctype html> to the to_html() template to comply with modern web standards [#5693], with thanks to @​mishrakushal for the contribution!
• Apply histfunc/z aggregation to marginal_x/marginal_y="histogram" subplots in density_heatmap/density_contour, instead of always showing raw bin counts [#3521], with thanks to @​lucasjamar for the contribution!
• Fix mpl_to_plotly silently dropping matplotlib path collections in data coordinates (such as violin plots, pcolor, event plots, stack plots, fill_between, and stem plots) by rendering them as filled polygons or lines [#5702], with thanks to @​robertoffmoura for the contribution!

Removed

• Remove the deprecated Figure Factory functions create_2d_density, create_annotated_heatmap, create_bullet, create_candlestick, create_choropleth, create_distplot, create_facet_grid, create_gantt, create_hexbin_mapbox, create_ohlc, create_scatterplotmatrix, and create_violin [#5627]
• Remove support for Kaleido versions less than v1.0.0 for static image generation [#5677]
• Remove support for Orca for static image generation [#5677]
• Remove engine argument from functions fig.write_image(),fig.to_image(), pio.write_image(), pio.write_images(), pio.to_image(), pio.full_figure_for_development(), and from renderer constructors [#5677]

Updated

• Update plotly.js from version 3.6.0 to version 4.0.0 [#5673]. This is a major-version release with many changes. See the plotly.js release notes for the full list. The most significant changes include:
  • Add quiver trace type to visualize vector fields using arrows [#7710, #7945]
  • Add "Share Chart" modebar button for generating a chart-sharing link via Plotly Cloud [#7909]
  • Remove scattermapbox, choroplethmapbox, densitymapbox trace types, the mapbox subplot, and the mapboxAccessToken config option [#7860]. Use the equivalent *map traces instead.
    • The corresponding graph_objects and Plotly Express functions have also been removed in plotly.py; use the map versions instead
  • Drop support for MathJax v2, and add support for v4 [#7898]. MathJax is the JavaScript library used for rendering mathematical equations in plotly charts.
  • Switch color processing library from TinyColor to culori [#7536, #7962]. There are some changes to supported color string formats as a result:
    • rgb()/rgba() strings with decimal 0–1 fractions are no longer supported
    • hsv() color strings are no longer supported
    • Strings with invalid syntax such as hsl(120, 50% 50%) are no longer supported
    • New supported formats: '#ff0000aa', '#f00a', 'rgb(255 0 0)', 'rgba(255 0 0 / 0.5)', 'hsl(0 100% 50% / 0.5)', 'hsla(0, 100%, 50%, 0.5)', 'hwb(0, 0%, 0%)', lab(), lch(), oklab(), oklch(), color(), hsl(0.5turn 60% 40%), hsl(none 60% 40%)
  • Replace country-regex with country-iso-search to search for country names in choropleth, scattergeo traces [#7856]. Most country names are handled exactly the same; a small number of legacy entries have been removed.
  • Change layout.geo.fitbounds default from false to 'locations' [#7895]. geo subplots will now auto-fit the initial view to the trace data by default.
  • Dynamically compute center and zoom values for scattermap and densitymap traces. The initial map view will now auto-fit to the trace data by default. Add layout.map.fitbounds attribute (default 'locations') to enable or disable auto-fitting behavior [#7884, #7913]
  • Fix GeoJSON bounding-box computation for choropleth and scattergeo traces whose geometry crosses the antimeridian [#7891]

Changelog

Sourced from plotly's changelog.

[7.0.0] - 2026-08-25

Fixed

• Fix hex_to_rgb parsing of 3-digit shorthand hexadecimal colors such as #FFF [#5662], with thanks to @​genrichez for the contribution!
• Improve px.*_map() auto-fitting behavior when zoom and center are not specified [#5686]
• Add <!doctype html> to the to_html() template to comply with modern web standards [#5693], with thanks to @​mishrakushal for the contribution!
• Apply histfunc/z aggregation to marginal_x/marginal_y="histogram" subplots in density_heatmap/density_contour, instead of always showing raw bin counts [#3521], with thanks to @​lucasjamar for the contribution!
• Fix mpl_to_plotly silently dropping matplotlib path collections in data coordinates (such as violin plots, pcolor, event plots, stack plots, fill_between, and stem plots) by rendering them as filled polygons or lines [#5702], with thanks to @​robertoffmoura for the contribution!

Updated

• Update plotly.js from version 3.6.0 to version 4.0.0 [#5673]. This is a major-version release with many changes. See the plotly.js release notes for the full list. The most significant changes include:
  • Add quiver trace type to visualize vector fields using arrows [#7710, #7945]
  • Add "Share Chart" modebar button for generating a chart-sharing link via Plotly Cloud [#7909]
  • Remove scattermapbox, choroplethmapbox, densitymapbox trace types, the mapbox subplot, and the mapboxAccessToken config option [#7860]. Use the equivalent *map traces instead.
    • The corresponding graph_objects and Plotly Express functions have also been removed in plotly.py; use the map versions instead
  • Drop support for MathJax v2, and add support for v4 [#7898]. MathJax is the JavaScript library used for rendering mathematical equations in plotly charts.
  • Switch color processing library from TinyColor to culori [#7536, #7962]. There are some changes to supported color string formats as a result:
    • rgb()/rgba() strings with decimal 0–1 fractions are no longer supported
    • hsv() color strings are no longer supported
    • Strings with invalid syntax such as hsl(120, 50% 50%) are no longer supported
    • New supported formats: '#ff0000aa', '#f00a', 'rgb(255 0 0)', 'rgba(255 0 0 / 0.5)', 'hsl(0 100% 50% / 0.5)', 'hsla(0, 100%, 50%, 0.5)', 'hwb(0 0% 0%)', lab(), lch(), oklab(), oklch(), color(), hsl(0.5turn 60% 40%), hsl(none 60% 40%)
  • Replace country-regex with country-iso-search to search for country names in choropleth, scattergeo traces [#7856]. Most country names are handled exactly the same; a small number of legacy entries have been removed.
  • Change layout.geo.fitbounds default from false to 'locations' [#7895]. geo subplots will now auto-fit the initial view to the trace data by default.
  • Dynamically compute center and zoom values for scattermap and densitymap traces. The initial map view will now auto-fit to the trace data by default. Add layout.map.fitbounds attribute (default 'locations') to enable or disable auto-fitting behavior [#7884, #7913]
  • Fix GeoJSON bounding-box computation for choropleth and scattergeo traces whose geometry crosses the antimeridian [#7891]

[7.0.0rc0] - 2026-07-29

Removed

• Remove the deprecated Figure Factory functions create_2d_density, create_annotated_heatmap, create_bullet, create_candlestick, create_choropleth, create_distplot, create_facet_grid, create_gantt, create_hexbin_mapbox, create_ohlc, create_scatterplotmatrix, and create_violin [#5627]
• Remove support for Kaleido versions less than v1.0.0 for static image generation [#5677]
• Remove support for Orca for static image generation [#5677]
• Remove engine argument from functions fig.write_image(),fig.to_image(), pio.write_image(), pio.write_images(), pio.to_image(), pio.full_figure_for_development(), and from renderer constructors [#5677]

Updated

• Update plotly.js from version 3.6.0 to version 4.0.0-rc.0 [#5673]. This is a major-version release candidate with many changes. See the plotly.js release notes for the full list. The most significant changes include:
  • Add quiver trace type to visualize vector fields using arrows [#7710]
  • Add "Share Chart" modebar button for generating a chart-sharing link via Plotly Cloud [#7909]
  • Remove scattermapbox, choroplethmapbox, densitymapbox trace types, the mapbox subplot, and the mapboxAccessToken config option [#7860]. Use the equivalent *map traces instead.
    • The corresponding graph_objects and Plotly Express functions have also been removed in plotly.py; use the map versions instead
  • Drop support for MathJax v2, and add support for v4 [#7898]. MathJax is the JavaScript library used for rendering mathematical equations in plotly charts.
  • Switch color processing library from TinyColor to color [#7536]. There are some changes to supported color string formats as a result:
    • rgb()/rgba() strings with decimal 0–1 fractions are no longer supported
    • hsv() color strings are no longer supported
    • New supported formats: '#ff0000aa', '#f00a', 'rgb(255 0 0)', 'rgba(255 0 0 / 0.5)', 'hsl(0 100% 50% / 0.5)', 'hsla(0, 100%, 50%, 0.5)', 'hwb(0, 0%, 0%)'
  • Replace country-regex with country-iso-search to search for country names in choropleth, scattergeo traces [#7856]. Most country names are handled exactly the same; a small number of legacy entries have been removed.
  • Change layout.geo.fitbounds default from false to 'locations' [#7895]. geo subplots will now auto-fit the initial view to the trace data by default.
  • Dynamically compute center and zoom values for scattermap and densitymap traces. The initial map view will now auto-fit to the trace data by default. Add layout.map.fitbounds attribute (default 'locations') to enable or disable auto-fitting behavior [#7884, #7913]
  • Fix GeoJSON bounding-box computation for choropleth and scattergeo traces whose geometry crosses the antimeridian [#7891]

... (truncated)

Commits

• 73c4745 version changes for v7.0.0
• c58eb29 Merge pull request #5712 from plotly/v7.0
• 45ecea4 Merge pull request #5711 from plotly/bump-plotlyjs-v4.0.0
• 6bd0b40 update changelog
• 860b4f7 Apply suggestion from @​camdecoster
• f50f9ff update changelog
• 367886b change plotly.js master references to main
• bb7d2de update color validator for new color formats
• 11338e1 update plotly.js to v4.0.0 and re-run codegen and js builds
• 939cd69 Merge branch 'main' into v7.0
• Additional commits viewable in compare view

Updates streamlit to 1.63.0

Release notes

Sourced from streamlit's releases.

1.63.0

What's Changed

New Features 🎉

• [feature] Add wrap to st.pills and st.segmented_control by @​lukasmasuch in streamlit/streamlit#16369
• [feature] Add on_change="ignore" mode to st.slider by @​lukasmasuch in streamlit/streamlit#14828
• [feature] Auto no-wrap for direct column widgets by @​lukasmasuch in streamlit/streamlit#16578
• [feature] Add type="step" to st.expander and st.status by @​lukasmasuch in streamlit/streamlit#16558
• [feature] Make st.rerun() work in widget callbacks by @​sfc-gh-lwilby-1 in streamlit/streamlit#16158
• [feature] Add on_change="ignore" mode to st.text_input by @​lukasmasuch in streamlit/streamlit#16605
• [feature] Configurable cache background-refresh TTL multiplier by @​lukasmasuch in streamlit/streamlit#16599
• [feature] Add select_all and first-row Enter to st.multiselect by @​lukasmasuch in streamlit/streamlit#16673
• [feature] Add wrap parameter to text commands by @​lukasmasuch in streamlit/streamlit#16617
• [feature] Add icon parameter to title, header, subheader by @​lukasmasuch in streamlit/streamlit#16418
• [feature] Add event-scoped fragment reruns via st.rerun(scope=) by @​sfc-gh-lwilby-1 in streamlit/streamlit#16161

Bug Fixes 🐛

• [fix] Skip syntax highlighting for very long code blocks (#11996) by @​sfc-gh-dbyttow in streamlit/streamlit#16567
• [fix] Keep menu and JSON overlays clickable in st.dialog by @​mayagbarnes in streamlit/streamlit#16583
• [fix] Clamp date/datetime input default bounds at date.min/max by @​mayagbarnes in streamlit/streamlit#16582
• [fix] Match skills-nudge button labels to the card's text size by @​sfc-gh-nbellante in streamlit/streamlit#16482
• [fix] Stop Cmd/Ctrl+C from opening clear-cache dialog by @​lukasmasuch in streamlit/streamlit#16615
• [fix] Prevent markdown lists from overflowing narrow containers by @​mayagbarnes in streamlit/streamlit#16632
• [fix] Echo guest-to-host messages to in-iframe hosts by @​lukasmasuch in streamlit/streamlit#16647
• [fix] Restore Ctrl/Cmd+A in st.multiselect filter by @​lukasmasuch in streamlit/streamlit#16650
• [fix] Correct public widget overload typings by @​lukasmasuch in streamlit/streamlit#16633
• [fix] Error message bullets and uppercase-hex object reprs by @​mayagbarnes in streamlit/streamlit#16683
• [fix] Show the correct year in the date picker header by @​mayagbarnes in streamlit/streamlit#16706
• [fix] Harden AppTest for keys, disabled widgets, and navigation by @​lukasmasuch in streamlit/streamlit#16711
• [fix] Log all user-facing warnings to the console by @​lukasmasuch in streamlit/streamlit#16717
• [fix] Prevent upload hang when middleware reads the body first by @​mayagbarnes in streamlit/streamlit#16709
• [fix] Keep a time given before a date in st.datetime_input by @​mayagbarnes in streamlit/streamlit#16664

Other Changes

• [chore] Release v1.62.0 by @​github-actions[bot] in streamlit/streamlit#16579
• [docs] Recommend st.table for key-value lists by @​lukasmasuch in streamlit/streamlit#16576
• [docs] Clarify UploadedFile public API by @​lukasmasuch in streamlit/streamlit#16604
• [fix] Keep spinner moving and expose its label by @​mayagbarnes in streamlit/streamlit#16620
• [refactor] Add typed API exceptions for telemetry by @​lukasmasuch in streamlit/streamlit#16637
• [refactor] Add missing-required parameter error by @​lukasmasuch in streamlit/streamlit#16508
• [docs] Recommend icons for navigation pages by @​lukasmasuch in streamlit/streamlit#16658
• [refactor] Adopt shared parameter exception types by @​lukasmasuch in streamlit/streamlit#16668
• [refactor] Finish public API exception cleanup by @​lukasmasuch in streamlit/streamlit#16656
• [refactor...

  Description has been truncated