ISP Modem / Router:
Calix 844 G
Has 4 Gbit ethernet ports
10Gtek Gigabit Ethernet Media Converter with GBIC:
https://www.amazon.ca/Ethernet-Converter-SFP-1000Base-Tx-Transceiver/dp/B06XBSZJL3
Will go with this option as it's cheaper than a Ubiquiti switch or Dream Machine Pro
Conduit:
100ft of old PVC mainline water tubing
1/2" or 3/4" inner diameter. Need to confirm.
3M Wire Pulling Lubricant
https://www.amazon.ca/dp/B001AO3FHK/?coliid=IZW33GIBQRD4C&colid=2KYNMYSP4GZA&psc=1
Not sure if this is necessary but don't want to damage fibre
40m / 130ft of LC/LC Multi-mode fibre - Monoprice:
https://www.monoprice.com/product?p_id=2616
Product is OM1. Not sure which OM matters or is appropriate
Cottage 2 Switch:
Ubiquiti US-8-150W
https://ca.store.ui.com/products/unifi-switch-8-150w?_pos=1&_sid=2d54543af&_ss=r
Has POE and SFP port
Mini GBIC for Cottage 2 Switch
10GTek 1000BASE-SX
https://www.amazon.ca/10Gtek-GLC-SX-MMD-GLC-SX-MM-Transceiver-1000Base-SX/dp/B01CN82KQI/
SFP Module to connect to cottage 1
Cottage 2 Access Point / WiFi
Ubiquiti FlexHD
https://ca.store.ui.com/collections/unifi-network-wireless/products/unifi-flexhd
+--------------------------------------------------+
| | |
| | ISP Fibre Feed (Internet) |
| | 2Gbps / 1Gbps |
| | |
| +------------------+ +-------------+ |
| | | | | |
| | Calix 844G |-----------| 10GTek | |
| | | Cat6A | | |
| +------------------+ +------------++ |
| |SFP Port | |
| |1000Base-SX | |
| |Module | |
| +------------+ |
| | |
+-----------------------------------------|--------+
Cottage 1 |
|
|
|
| Multi-mode LC/LC Fibre
|
|
Cottage 2 |
+--------------------------------------------------+
| +--------+ | |
| | | +------------+ |
| |AP | |SFP Port | |
| |Ubiquiti| |1000BASE-SX | |
| |FlexHD | |Module | |
| | | +---+------------+-+ |
| | ------------------- | |
| | | POE Cat6A |Ubiquiti US-8-150W| |
| | | | | |
| | | +------------------+ |
| +--------+ |
+--------------------------------------------------+
#Questions and Comments
- Do I need a pull tape or can I just use a pull string with a vaccum to get it down the hose? Seems like a much cheaper solution for something I'm only doing once. See https://www.youtube.com/watch?v=jo3dmunFodE&list=PL8ln136hCxIhsyC5WTF774vlB864leBwu&index=3
- Need to measure width of a dual LC fibre connector to see if it fits through the conduit. If I separate. I need to figure out how to bend the separate cables to pull without breaking them