Repository navigation
Button Reference
This page lists the physical controls on each supported wheel, and the joystick button index each one reports. Buttons use sequential indices that match Windows DirectInput. (DirectInput is the older Windows game-input interface.) So bindings stay consistent across platforms. The RS50 / G PRO layout is first. The G923 has its own.
This is the reference for binding controls in a game. The wire-level bitmask (which report bit encodes which button) is in the Protocol Specification.

The Index column is the joystick button number games show when binding. It is sequential and matches Windows DirectInput. The Diagram # column is the numbered callout box in the layout image above. The two numbering systems are unrelated. So a button's index and its diagram number usually differ.
| Index | Button | Diagram # |
|---|---|---|
| 0 | A | 3 |
| 1 | X | 1 |
| 2 | B | 4 |
| 3 | Y | 2 |
| 4 | Right Paddle / Gear Right | 17 |
| 5 | Left Paddle / Gear Left | 16 |
| 6 | RT (Right Trigger) | 5 |
| 7 | LT (Left Trigger) | 15 |
| 8 | Camera / View | 11 |
| 9 | Menu | 9 |
| 10 | RSB (Right Stick) | 6 |
| 11 | LSB (Left Stick) | 14 |
| 21 | Right Encoder CW | 8 |
| 22 | Right Encoder CCW | 8 |
| 23 | Right Encoder Push | 8 |
| 24 | Left Encoder CW | 12 |
| 25 | Left Encoder CCW | 12 |
| 26 | Left Encoder Push | 12 |
| 27 | G1 (Logitech logo) | 10 |
| 28 | GL | 13 |
| 29 | GR | 7 |
Notes:
- GL and GR are their own buttons, not aliases of the shifter paddles. This was hardware-verified by guided capture.
- The D-pad reports as a hat switch (
ABS_HAT0X/ABS_HAT0Y), not as four buttons. (A hat switch is the Linux input name for a directional pad.) It is diagram callout "D". - Indices 12 to 20 are gaps in the HID descriptor (unused). (The HID descriptor is the wheel's own USB description of its reports.)
The G923 reports the same sequential indexing, but a different set of
buttons. It has no G1 / GL / GR, and one dial only (right hand, no left
encoder). The table was hardware-captured on a PlayStation edition
(046d:c266). The app's own G923 button labels come from the same
capture. The callout diagram above is RS50 / G PRO only. It is not shown
for this wheel.
| Index | Button |
|---|---|
| 0 | X |
| 1 | Square |
| 2 | Circle |
| 3 | Triangle |
| 4 | Right Paddle |
| 5 | Left Paddle |
| 6 | R2 |
| 7 | L2 |
| 8 | Share |
| 9 | Options |
| 10 | R3 |
| 11 | L3 |
| 19 | Plus (Up) |
| 20 | Minus (Down) |
| 21 | Dial CW |
| 22 | Dial CCW |
| 23 | Dial Push |
| 24 | PS |
Notes:
- Indices 12 to 18 are descriptor gaps (unused). Indices 19 and 20 are real buttons here, unlike on the RS50 / G PRO.
- The D-pad is a hat switch (
ABS_HAT0X/ABS_HAT0Y), same as above.
The accessory rides the wheel's existing report. So its inputs reach games with no extra setup. By its mode switch:
| Mode | Action | evdev |
|---|---|---|
| Sequential shifter | shift up | BTN_TOP2 |
| Sequential shifter | shift down | BTN_PINKIE |
| Digital handbrake | pull past point |
BTN_THUMB2 (face button) |
| Analog handbrake | pull |
ABS_Z axis |
(The evdev column gives the Linux kernel input code each action sends.) The analog handbrake can take a response curve; see Configuring the Wheel.
The Info / Testing page in logi-wheel / logi-wheel-gui highlights each button while you hold it. It names the last one pressed, in your own wheel's labels. That makes verifying a binding (or a suspect button) quick. See Configuring the Wheel.