Switch between your normal and stretched resolution with a single hotkey.
StretchKey is a lightweight Windows utility for switching display resolutions without opening your graphics control panel every time. Choose your display modes once, then toggle between them instantly—even while a game is running.
Download StretchKey.exe · All releases
- Instant resolution switching — toggle between your normal and stretched modes using a global hotkey (
Ctrl + Alt + F11by default). - Customizable setup — select a monitor, resolution and refresh rate for each mode, and assign your own shortcut.
- System tray integration — close the window without stopping the hotkey; reopen, switch modes or exit from the tray.
- Optional startup — launch automatically with Windows, minimized to the tray.
- Portable and lightweight — a single executable with no installer required.
- No game modification — changes the Windows display mode using native system APIs; it does not inject into or modify games.
- Download the latest StretchKey.exe.
- Run the executable. No installation is required.
- Choose your monitor and select your normal and stretched resolutions, including the desired refresh rates.
- Press
Ctrl + Alt + F11to switch to the stretched resolution. Press it again to switch back.
To customize the shortcut, click the Hotkey field and press your preferred key combination. You can also use the Switch resolution button or the tray menu.
Note
StretchKey is not currently code-signed, so Windows may show a Microsoft Defender SmartScreen warning. Only run software you trust. The complete application source is available in app.cs.
StretchKey lists the display modes that Windows and your graphics driver make available. It does not create new resolutions. If your preferred resolution is missing, create it in your graphics software first:
| GPU | Where to configure a custom resolution |
|---|---|
| NVIDIA | NVIDIA Control Panel → Change resolution → Customize → Create Custom Resolution |
| AMD | AMD Software → Display → Custom Resolutions (availability varies by driver) |
| Intel | Intel Graphics Command Center → custom resolution settings (where supported) |
After creating the mode, choose Exit from the StretchKey tray menu and launch the app again to refresh the list.
The display mode and the scaling method are separate settings. If you see black bars, check your GPU scaling configuration:
- NVIDIA: select Full-screen scaling in NVIDIA Control Panel.
- AMD: enable GPU Scaling and select Full Panel where supported.
- Intel: select Stretched scaling where supported.
Depending on your driver and monitor, some modes may not support stretching. Set the matching resolution in your game as well.
| Issue | What to try |
|---|---|
| Resolution is missing | Create or enable it in your GPU settings, then restart StretchKey. |
| Hotkey does not work | Check that StretchKey is running in the tray. Try another shortcut if the current one is already registered by another app. |
| Black bars appear | Review the full-screen/GPU scaling settings above. |
| Windows refuses a display mode | Select a resolution and refresh-rate combination supported by your monitor and driver. |
| Screen goes black after switching | Restart your PC if you cannot restore the display. StretchKey applies mode changes for the current session rather than saving them as Windows defaults. |
- Platform: Windows only.
- Tested hardware: NVIDIA GeForce RTX 3070.
- Other GPUs: AMD and Intel have not yet been verified. StretchKey uses standard Windows display APIs, but available modes and scaling behavior depend on the driver and monitor.
- Game compatibility: StretchKey does not interact with game processes, but you should still follow the rules of any game or anti-cheat system you use.
- Display modes: only resolutions and refresh rates reported by Windows are shown; actual stretching depends on GPU scaling support.
If you test StretchKey on another GPU or encounter a problem, please open an issue.
The application is written in C# using Windows Forms and Win32 display APIs. It has no third-party package dependencies.
git clone https://github.com/jargyl/StretchKey.git
cd StretchKey
build.cmdThe build script compiles app.cs into StretchKey.exe using the 64-bit .NET Framework C# compiler at %WINDIR%\Microsoft.NET\Framework64\v4.0.30319\csc.exe. A Windows environment with that compiler available is required.
To run the included logic tests:
test.cmdThese tests cover resolution toggling, mode parsing, hotkey formatting and settings serialization; they do not exercise physical monitor switching.
- Preferences are stored in
%APPDATA%\StretchKey\settings.ini. - Enabling Start with Windows creates an entry in the current user’s Windows startup registry key and launches the app with
--tray. - Display changes are applied to the current session, not written as permanent Windows display defaults.
Released under the MIT License.
