Dj Queue ESP32 Source Code

Jackson Wheeler

Using the ESP ADF Library

DJQueueServer

Plays songs over from http over bluetooth.

Sibling repos

• DJQueue-WebApp
• DJQueueServer

Compatibility

• You need to be using the ESP-32 Lyrat board.
• And using the ESP-ADF library.
• ESP32 Espressif Arduino library wont work!
• Neither will a normal ESP-32.

Usage

Install the espressif ESP-ADF library

Configure the installation with make menuconfig:

• Set up the Wi-Fi and BT connection in menuconfig -> Example Configuration -> Fill in Wi-Fi SSID & WiFi Password and BT remote device name.
• You also need to set the device flashing port used, the will usually be "/dev/cu.SLAB_USBtoUART"

Flash the board and setup a BT Speaker:

• Set the name of the bluetooth speaker you will use.
• Switch the BT Speaker on.

Flash and run djqueue:

• you will need to hit the pair button on the bt speaker after the board is running.
• If all is working, the speaker will say 'DJ Queue is ready to play'