Shelly Button1 Test

This project provides an easy to setup simple webserver that can be used to try out the Shelly Button1. It supports web handlers and resources for each short and long push url action that the Shelly Button1 has.

Prerequisites

• nodejs >= 12
• yarn / npm

Build and Start

• Build with yarn install oder npm install
• Start server with yarn start or npm start

Features

The server starts on http://localhost. The following urls have handlers attached and can therefore be called by the Shelly Button1:

• /button/short/1
• /button/short/2
• /button/short/3
• /button/long/1

These urls must be configured as the actions url in the configuration of the Shelly Button1:

ACTION URL	URL TO SET TO
Short url 1	http://<your host url>/button/short/1
Short url 2	http://<your host url>/button/short/2
Short url 3	http://<your host url>/button/short/3
Long url 1	http://<your host url>/button/long/1

When an url is called the server will respond with HTTP/1.1 200 OK and a small message. It will also log the following information:

• Url which was called (short, long, which one)
• Ip address of the caller
• Battery status of the button (is retrieved in a separate call to the button)

The log will look like this:

2021-02-07T09:13:28.533Z SERVER: 'short url 1' was called from 101.10.23.7
2021-02-07T09:13:28.533Z SERVER: Shelly status (101.10.23.7) => Battery 100% and 4.19 Volts