[ferrohd]

🤖 New release

• tesmart-proto: 0.1.0 -> 0.1.1
• tesmart-client: 0.1.0 -> 0.1.1
• tesmart-serial: 0.1.0 -> 0.1.1 (✓ API compatible changes)
• tesmart-device: 0.1.0 -> 0.1.1
• tesmart-sim: 0.1.0 -> 0.1.1
• tesmart-tcp: 0.1.0 -> 0.1.1
• tesmart: 0.1.0 -> 0.1.1
• tesmart-cli: 0.1.0 -> 0.1.1

Changelog

tesmart-proto

0.1.0 - 2026-10-17

Added

• (proto) classify a decoded chunk without borrowing the decoder
• (proto) tell an unsolicited report from a pending answer
• (proto) expose the event queue and count what it dropped
• (proto) retry a query on a missed deadline and fail loudly after
• (proto) withhold the bytes until the command gap has passed
• (proto) refuse a request outside the profile before a byte is sent
• (proto) add the Engine and its policy accessors
• (proto) model a pending exchange and what it will accept
• (proto) add the engine event and error vocabulary
• (proto) collect the field-tested timings into a Policy
• (proto) identify an exchange so a reply can be matched to it
• (proto) register the 8x8, 16x16 and sdi models
• (proto) register the 4x4 matrices, with and without a LAN port
• (proto) register the dual-monitor switch
• (proto) register the Family A models with no published protocol
• (proto) register the EB23 and P23 series and their field reports
• (proto) register the single-monitor Family A models
• (proto) name the capability set of every protocol document
• (proto) add ModelInfo and let the family have the last word
• (proto) add Capabilities with the provenance of each claim
• (proto) grade a capability by how well established it is
• (proto) dispatch over the families at run time
• (proto) add the sdi switch, four bytes and no terminator
• (proto) add the matrix table as the union of all four command sets
• (proto) add the dual-monitor table and its inverted pass-through
• (proto) add the single-monitor KVM command table
• (proto) share the two opcodes every hex family agrees on
• (proto) explain what a clashing opcode would have done instead
• (proto) add the four protocol families with no default
• (proto) seal the Profile trait so families stay exhaustive
• (proto) add CommandInfo so a table can describe itself
• (proto) add ResponseKind for matching an in-flight exchange
• (proto) add Response and the kind an exchange is matched against
• (proto) add RequestKind as the key profiles are written against
• (proto) name and classify every request
• (proto) add the family-independent Request type
• (proto) resync past garbage without losing the frame behind it
• (proto) scan for a frame, text, or garbage to discard
• (proto) buffer a byte stream and hand out one chunk at a time
• (proto) add the decoder chunk vocabulary and the two directions
• (proto) dispatch a text command between the two languages
• (proto) parse the zero-padded network replies
• (proto) encode network queries and writes in both dialects
• (proto) add the two ascii dialects and the two scopes
• (proto) print link ports as 1-9 then A-G
• (proto) add the LINK routing report in both directions
• (proto) parse the MT00 matrix commands and the RD trap
• (proto) add the MT00 matrix command vocabulary
• (proto) encode hex frames with a derived length byte
• (proto) document the frame header, terminator and length byte
• (proto) add the text helpers both ascii languages need
• (proto) add Transmit so the engine can label and retry bytes
• (proto) build commands with write! and no allocator
• (proto) print protocol bytes the way the documents do
• (proto) add a copyable byte buffer sized for the 16x16 link reply
• (proto) add the four network settings and a partial config
• (proto) add the matrix display timeout and preset slots
• (proto) bound the auto-switch interval at five seconds
• (proto) add relative Step and the hotkey trigger
• (proto) add Toggle and the dual-monitor output
• (proto) add the buzzer and display timeout settings
• (proto) add a deterministic Tick clock for tests
• (proto) add a Timestamp trait so the engine never reads a clock
• (proto) add a drop-oldest ring for the engine event queue
• (proto) add a fixed-capacity byte fifo for the stream decoder
• (proto) gate ports on a per-model PortCount
• (proto) add Port with the write/read byte asymmetry

Documentation

• (proto) document the engine loop and what it protects you from

tesmart-client

0.1.0 - 2026-10-17

Added

• (client) report a change once, whichever way it was noticed
• (client) hold the connection open for as long as a watch lives
• (client) follow the active port by both report and poll
• (client) build a matrix without pretending it is a KVM
• (client) read the routing back and check it against what was asked
• (client) load and save presets, gated on the matrix series
• (client) route, mirror and confirm it from the reported table
• (client) add the Matrix handle with inputs and outputs apart
• (client) add the route options and the matrix verify switch
• (client) refuse to guess a family or a port count
• (client) probe how many inputs a switch really has
• (client) read and write network settings over the side-channel
• (client) add the write-only settings and the dual-monitor commands
• (client) read the port back after a switch, loudly if it disagrees
• (client) add the Kvm handle over a borrowed session
• (client) add the switch options and the three verify modes
• (client) resolve family and port count the same way for both builders
• (client) refuse a cross-family model and say which it was
• (client) share the network side-channel between both families
• (client) reconnect per command and clear a stale exchange
• (client) log every event and queue the unsolicited ones
• (client) select on the read, the engine deadline and the budget
• (client) turn the engine's poll interface into async functions
• (client) put the engine in the session, not in the connection
• (client) count what happened on the wire
• (client) add the warnings that are true but are not errors
• (client) confirm a matrix route from the reported routing table
• (client) report which network values answered and which read back
• (client) report a write-only command as sent, and a probed count
• (client) say whether a switch was verified, assumed or already set
• (client) describe the attached switch, catalogued or not
• (client) fold the broken-pipe family into a closed link
• (client) let the transport decide the ascii scope
• (client) choose a connection per command or a persistent one
• (client) define the Connector transport boundary
• (client) classify a failure so a caller can map it to an exit code
• (client) add OpError carrying what was attempted
• (client) separate a failed exchange from a failed operation

Documentation

• (client) tabulate what each operation can and cannot promise
• (client) document the loop order and the three tracing targets

tesmart-serial

0.1.1 - 2026-10-17

Added

• ship an arm64 linux binary (#3)

tesmart-device

0.1.0 - 2026-10-17

Added

• (device) handle the Family A and A' frames in one place
• (device) handle the matrix commands the model admits to having
• (device) route a matrix input to an output and report it back
• (device) answer network queries padded and split across segments
• (device) honour a command only if the model supports it
• (device) add the emulated switch and its front panel
• (device) hold the switch state with the factory defaults
• (device) configure an emulated switch from a registry model
• (device) add deliberate faults to reproduce what hardware does

Documentation

• (device) document both of its uses and the module layout

tesmart-sim

0.1.0 - 2026-10-17

Added

• (sim) press buttons and inject faults from outside the loop
• (sim) connect to an emulated switch over an in-process pipe
• (sim) serve a device without holding its lock across an await

tesmart-tcp

0.1.0 - 2026-10-17

Added

• (tcp) try every resolved address within one connect timeout

tesmart

0.1.0 - 2026-10-17

Added

• (tesmart) name every way a target string can fail
• (tesmart) open a switch from a target string and a model name
• (tesmart) erase the transport behind one connector and one stream

Changed

• (tesmart) reduce the facade to re-exports

Documentation

• the library re-exports, the tool resolves target strings

tesmart-cli

0.1.0 - 2026-10-17

Added

• (cli) print results to stdout and everything else to stderr
• (cli) define the json output contract separately from the library
• (cli) dispatch every command over one resolved target
• (cli) turn the global flags into a Kvm or a Matrix
• (cli) pin the exit code contract
• (cli) add the command surface and the global options

Changed

• (cli) own target resolution, with every transport always built

Documentation

• the library re-exports, the tool resolves target strings

---

This PR was generated with release-plz.