Skip to content

omamobile-device-tegu 0.2.20: double tap wakes the palmtop from sleep - #779

Merged
derekross merged 1 commit into
derekross:mainfrom
W4HO-ham:tegu-touch-wake
Nov 15, 2026
Merged

derekross merged 1 commit into
derekross:mainfrom
W4HO-ham:tegu-touch-wake

Conversation

@W4HO-ham

Copy link
Copy Markdown
Contributor

The 7 Pro's double tap from sleep (#730), for the 9a. The 9a's touchscreen is the same Synaptics S3908 on the same synaptics-tcm driver, so linux-omarchy-mobile#248 (in kernel-2026.11.13) gives it the same power/wakeup, off by default, and the same rule line turns it on.

What

Tested

On my palmtop (Pixel 9a), 2026-11-14, the package installed from this branch with tools/phone-install-package, on a test kernel: the published omamobile at 82f31d3a7 plus kernel #247, kernel #232 at fef165e74 and the sleep guard on for zumapro (7.3.0-rc6-omamobile-push1-g716f6d8ef355). omamobile-shell 0.2.127 (double tap and sleepd running).

  • After the reboot power/wakeup on spi0.0 read enabled, set by the rule; nothing set by hand.
  • The palmtop slept with the modem registered (systemctl suspend -i, a 10-minute RTC alarm as a backstop; wakes by the modem went straight back to sleep). The owner double-tapped the dark screen: the sleep ended on the touchscreen's interrupt (pm_wakeup_irq 55, spi0.0) after 90 s, and the panel was lit 3 s later (bl_power 0). He saw the screen light "maybe a half second" after the tap.
  • test/all, tests/all and tools/pr-check pass.

The owner was at the palmtop for the tap; the rest ran without him, as he has asked.

Not tested

  • The 9a's auto-sleep (omamobile-sleepd) putting the palmtop back to sleep after a wake that lit nothing: with the modem up the 9a's own inhibitor holds, so sleepd never slept it here.
  • Off the charger, and the battery cost of a touchscreen that can wake the palmtop.

This doesn't turn auto-sleep on for the 9a (no auto-sleep-default): that waits for the 9a's suspend to be verified as the 7 Pro's was, with #765 among the open points.

The 7 Pro's touch-wake rule (device-cheetah 0.1.55, derekross#730) for the 9a, whose touchscreen is the same Synaptics S3908 on the same synaptics-tcm driver: linux-omarchy-mobile#248, in kernel-2026.11.13, makes the touchscreen wakeup capable and leaves it off, and this rule turns it on. On a kernel without derekross#248 there is no power/wakeup and the rule does nothing.

0.2.19 is claimed by open pull requests (derekross#766, and derekross#483's rebase).
@derekross

Copy link
Copy Markdown
Owner

Thank you, this is a nice small one. The rule line matches the 7 Pro's byte for byte, the test compares the two only when cheetah's package is next to it, and #248 is in kernel-2026.11.13 as you say. On a default 9a, with auto-sleep off, nothing changes until the owner turns auto-sleep on, and then a double tap wakes it as on the 7 Pro.

Two things for the record, neither holding this up:

If you have one, a tools/phone-smoke report from the palmtop with this package installed would be good to have here.

I'll merge this.

@derekross
derekross merged commit b6d1e8e into derekross:main Nov 15, 2026
2 checks passed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants