Repository navigation
Conversation
Ship the plymouth-quit drop-in that cheetah and raven already have, so Plymouth leaves its last frame on screen until Hyprland draws instead of a black screen. gs-decon has no fbdev console to hand back, and on raven a plain "plymouth quit" hung for 27 s and held the session back (2026-10-17). The drop-in only does anything with "splash" on the kernel command line, which husky's descriptor gets from derekross#278; this package leaves device.conf alone. Also wrap omamobile-usb-rescue's header comment at 80 columns, as asked in derekross#250. No behaviour change. test/all passes (the installed drop-in matches raven's, comments aside). Booted from the package on a Pixel 8 Pro (2026-11-02): Plymouth started at 3.30 s and its quit, with --retain-splash, finished at 4.94 s, no hang.
|
@Somnius thank you, this is just what I asked for on #250. The drop-in matches raven's and cheetah's line for line, the test checks that it clears One note: you're right that this boot shows there's no hang, not that the frame stays up until Hyprland draws. A short video from a boot with the package version is welcome on #278, but I don't need it to merge this. This goes in first, and #278 on top of it as 0.1.6 (details there). |
|
Landed on main as 01f3d1f (squashed, authored by you), with the edits I described in my last comment. Thank you. |
…ekross#285) Plymouth now quits with --retain-splash on the Pixel 8 Pro, so the boot frame stays up until Hyprland draws instead of dropping to a black gap. The drop-in matches raven's and cheetah's line for line, and the package test checks that it clears ExecStart before setting its own. Booted from the package on the 8 Pro with no hang. Closes derekross#285 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@derekross this is the next husky package change, as you said on #250: the plymouth-quit drop-in raven and cheetah already ship, and the header-comment wrap you asked for, folded in.
The drop-in makes
plymouth quituse--retain-splash, so the last frame stays on screen until Hyprland draws instead of a black screen. gs-decon has no fbdev console to hand back to, and on raven a plain quit hung for 27 s. It only does anything withsplashon the kernel command line, which is #278, so on its own it's inert. I leftdevice.confalone here. The three unit lines are the same as raven's and cheetah's, only the comments differ, andtest/allchecks the installed file against raven's and that it resetsExecStart=first. Theomamobile-usb-rescueheader comment is wrapped at 80 columns, no code change. Version 0.1.5.One boot from the package, as you asked last time: I built 0.1.5 on the phone with
tools/phone-install-package, moved my hand-copied/etcdrop-in away first, and rebooted.systemctl cat plymouth-quit.serviceshows the drop-in from/usr/lib/systemd/system/plymouth-quit.service.d/withExecStart=-/usr/bin/plymouth quit --retain-splash,/proc/cmdlinehassplash plymouth.graphical plymouth.force-scale=1, Plymouth started at 3.30 s and its quit finished at 4.94 s, the display unit was up at 4.79 s and sddm at 4.94 s.tools/phone-smokewas all ok for the required checks. That shows no hang. It doesn't show that the frame stayed up until Hyprland drew, I haven't filmed this boot for that, only the earlier boot with the hand-copied file.test/allpasses (17 ok) andtools/pr-check origin/mainis all ok. Not tested: the same boot without the other local things I had on the phone in the #278 test (portal override, compositor colour), those aren't in this PR.