Skip to content
Closed
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion packages/omamobile-device-tegu/README.md
Original file line number Diff line number Diff line change
Expand Up @@ -16,7 +16,7 @@ packaged yet. What is here is what runs on in-tree drivers.
| `vendor/modprobe.d/omamobile-tegu-display.conf`, `omamobile-tegu-clk-acpm.conf` | `/usr/lib/modprobe.d` | 120 Hz as the ceiling and the panel really off on DPMS (the DSI commands themselves are allowed by the graphics start, for google-tg4c only); the GPU DVFS ceiling at 890 MHz |
| `bin/omamobile-tegu-aoc-start` + `vendor/systemd/system/omamobile-tegu-aoc.service` + `vendor/modprobe.d/omamobile-tegu-aoc.conf` | `/usr/bin`, `/usr/lib/systemd/system` (enabled; also `omamobile-aoc.service`), `/usr/lib/modprobe.d` | Boots the AoC (audio and sensor DSP) hang-safe: Trusty, the GSA, the AoC drivers, `aoc-tegu.bin`, waits for its 93 services, then loads the TAS2572 amplifiers. See below |
| `bin/omamobile-bt-addr` + `vendor/systemd/system/omamobile-bt-addr@.service` + `vendor/udev/rules.d/80-omamobile-bt-addr.rules` | `/usr/bin`, `/usr/lib/systemd/system`, `/usr/lib/udev/rules.d` | Gives the BCM4383 its real Bluetooth address from the bootloader's device tree when the controller appears, powering it on once first (set on a never-powered controller, the kernel withdraws the index for good). The Pixel 7 Pro's script, with the extra waits the 9a needed |
| `bin/omamobile-tegu-usb-rescue` + `src/tegu-tcpc-switch.c` + `vendor/systemd/system/omamobile-tegu-usb-rescue.service` | `/usr/bin`, `/usr/lib/systemd/system` (enabled by a vendor wants link) | Closes the MAX77779's USB data switch after a cable replug while no Type-C driver owns the chip; with one loaded it exits. The helper reads the chip's identity and VBUS before its one write and never forces an address a driver holds |
| `bin/omamobile-tegu-usb-rescue` + `src/tegu-tcpc-switch.c` + `vendor/systemd/system/omamobile-tegu-usb-rescue.service` | `/usr/bin`, `/usr/lib/systemd/system` (enabled by a vendor wants link) | Closes the MAX77779's USB data switch after a cable replug while no Type-C driver owns the chip, also when the gadget still reads "configured" from before the unplug (dwc3 never hears of one without a Type-C driver, so the switch is read every 10 s while configured); with one loaded it exits. The helper reads the chip's identity and VBUS before its one write and never forces an address a driver holds |
| `bin/omamobile-tegu-charge-limit` + `vendor/udev/rules.d/75-omamobile-tegu-charger.rules` | `/usr/bin`, `/usr/lib/udev/rules.d` | Applies `/etc/omamobile/charge-limit` (a percentage, say `80`): charging stops there and starts again 5 below. With the kernel's `max77779-charger` driver, which has charge inhibit and no end threshold, udev runs it on every battery change and it switches `charge_behaviour` between `inhibit-charge` and `auto` by the battery's capacity. No file: charge to 100 % |
| `bin/omamobile-setup-system` | `/usr/bin` | System setup for Omarchy's lifecycle (omamobile-firstboot runs it): UTF-8 locale, timezone, NTP, and enables the sensor proxy and the NFC link opener (`omamobile-nfc-open`). Not the fingerprint service, speaker protection or the GNSS socket yet (see the script) |
| `vendor/systemd/system-sleep/omamobile-tegu-wifi` | `/usr/lib/systemd/system-sleep` | Keeps Wi-Fi loaded across s2idle when `/etc/omamobile/wifi-keep-across-sleep` exists (the chip reloads its firmware on resume and iwd reconnects; the hook checks that from a transient unit, `omamobile-tegu-wifi-check`, so the lock screen doesn't wait for it), otherwise unloads and reloads brcmfmac around the sleep; after a sleep that lost Wi-Fi it unloads for the rest of the boot. It reloads the in-tree `brcmfmac`; a phone still running an out-of-tree build of it keeps its own hook until the Wi-Fi series lands |
Expand Down
17 changes: 17 additions & 0 deletions packages/omamobile-device-tegu/bin/omamobile-tegu-usb-rescue
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,12 @@
# OMAMOBILE_TEGU_ROOT: a scratch root for the package tests;
# OMAMOBILE_TEGU_RESCUE_GRACE: seconds the gadget may stay unconfigured
# before the chip is read (default 4; then once per grace period).
# A configured gadget isn't proof the cable stayed in: with no Type-C
# driver, dwc3 never hears of an unplug, so after a replug the gadget can
# still read "configured" with the switch open and the phone off the bus.
# So while configured, the switch is read once per
# OMAMOBILE_TEGU_RESCUE_STALE seconds (default 10), and closed if it is
# open with VBUS present.
set -uo pipefail

root=${OMAMOBILE_TEGU_ROOT:-}
Expand All @@ -22,6 +28,7 @@ if [[ -n $root ]]; then
fi
tool=${TEGU_TCPC_SWITCH:-/usr/bin/tegu-tcpc-switch}
grace=${OMAMOBILE_TEGU_RESCUE_GRACE:-4}
stale=${OMAMOBILE_TEGU_RESCUE_STALE:-10}
once=0
[[ ${1:-} == --once ]] && once=1
log() { echo "omamobile-tegu-usb-rescue: $*"; }
Expand All @@ -33,6 +40,7 @@ gadget_state() { cat "$root"/sys/class/udc/*/state 2>/dev/null | head -1; }
vbus_present() { local p; p=$("$tool" power 2>/dev/null | tail -1); [[ -n $p ]] && (( (p & 4) != 0 )); }

open_since=0
checked=0
log "watching the gadget state and the TCPC data switch"
while :; do
if tcpm_owns; then
Expand All @@ -42,6 +50,15 @@ while :; do
state=$(gadget_state)
if [[ $state == configured ]]; then
open_since=0
now=$(date +%s)
if (( now - checked >= stale )); then
checked=$now
sw=$("$tool" switch 2>/dev/null | tail -1)
if [[ -n $sw && $sw != 0x09 ]] && vbus_present; then
log "gadget configured but USBSW_CTRL $sw with VBUS present (a replug the gadget didn't see): closing the data switch"
"$tool" connect 2>&1 | tail -1
fi
fi
else
now=$(date +%s)
(( open_since == 0 )) && open_since=$now
Expand Down
19 changes: 16 additions & 3 deletions packages/omamobile-device-tegu/test/usb-rescue
Original file line number Diff line number Diff line change
@@ -1,7 +1,8 @@
#!/bin/bash
# SPDX-License-Identifier: MIT
# omamobile-tegu-usb-rescue in a scratch root, one pass at a time: a
# configured gadget is left alone, an open switch on an unconfigured gadget
# configured gadget only has its switch read, and closed if a replug left it
# open with VBUS, an open switch on an unconfigured gadget
# with VBUS is closed once, a closed switch is not written, the cable out
# (no VBUS) costs one register read and no log line, and a Type-C driver
# that owns the chip ends the watch before the chip is read.
Expand All @@ -12,6 +13,7 @@ fail() { printf 'not ok - usb-rescue: %s\n' "$1" >&2; exit 1; }
tmp=$(mktemp -d); trap 'rm -rf "$tmp"' EXIT
export OMAMOBILE_TEGU_ROOT=$tmp/root
export OMAMOBILE_TEGU_RESCUE_GRACE=0
export OMAMOBILE_TEGU_RESCUE_STALE=0
export TEST_LOG=$tmp/calls
export TEGU_TCPC_SWITCH=$tmp/bin/tegu-tcpc-switch
udc=$OMAMOBILE_TEGU_ROOT/sys/class/udc/11110000.dwc3
Expand All @@ -26,8 +28,19 @@ chmod +x "$tmp/bin/tegu-tcpc-switch"
calls() { tr '\n' ' ' < "$TEST_LOG" | sed 's/ $//'; }

: > "$TEST_LOG"; echo configured > "$udc/state"
SW=0x00 "$script" --once >/dev/null
[[ -z $(calls) ]] || fail "a configured gadget was touched: $(calls)"
out=$(SW=0x09 "$script" --once)
[[ $(calls) == "switch" && $out != *closing* ]] || fail "a configured gadget with the switch closed: one read, nothing else: $(calls)"

# configured, but the switch is open with VBUS: a replug dwc3 never saw
: > "$TEST_LOG"
out=$(SW=0x00 "$script" --once)
[[ $(calls) == "switch power connect" ]] || fail "a stale configured gadget's open switch was not closed: $(calls)"
[[ $out == *"a replug the gadget didn't see"* ]] || fail "the stale-gadget close is not logged"

# configured and open with the cable out: nothing written, nothing logged
: > "$TEST_LOG"
out=$(PW=0x00 SW=0x00 "$script" --once)
[[ $(calls) == "switch power" && $out != *closing* ]] || fail "a stale gadget with the cable out was written: $(calls)"

: > "$TEST_LOG"; echo 'not attached' > "$udc/state"
out=$(SW=0x00 "$script" --once)
Expand Down
2 changes: 1 addition & 1 deletion packages/omamobile-device-tegu/version
Original file line number Diff line number Diff line change
@@ -1 +1 @@
0.2.5
0.2.6