Skip to content
Merged
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
36 changes: 36 additions & 0 deletions arch/arm64/boot/dts/exynos/google/zumapro-tegu.dts
Original file line number Diff line number Diff line change
Expand Up @@ -53,6 +53,17 @@
};
};

/*
* The handshake lines of the Kepler GNSS core in the S5300 modem
* (its SPI device is on spi21): the core's request to the host,
* which is also the host's interrupt, and the host's request to it.
*/
gnss {
compatible = "samsung,exynos-gnss";
gnss2ap-spi-gpios = <&gpa5 4 GPIO_ACTIVE_HIGH>;
ap2gnss-spi-gpios = <&gpp2 3 GPIO_ACTIVE_HIGH>;
};

gpio-keys {
compatible = "gpio-keys";

Expand Down Expand Up @@ -776,6 +787,27 @@
};
};

/*
* The Kepler GNSS core's data link, 64-byte blocks on USI3 of HSI0. The bus
* keeps zumapro's port configuration: a 64-byte block then moves in one
* piece (with gs101's, the controller driver cuts it into 60 and 4 bytes,
* and the second piece sometimes times out). Feedback delay 0 is stock's.
* The bus has no pin group and runs on the bootloader's pin state.
*/
&spi21 {
status = "okay";

gnss@0 {
compatible = "samsung,gnss-spi";
reg = <0>;
spi-max-frequency = <3125000>;

controller-data {
samsung,spi-feedback-delay = <0>;
};
};
};

&sysreg_apm {
status = "okay";
};
Expand Down Expand Up @@ -873,6 +905,10 @@
status = "okay";
};

&usi3_hsi0 {
status = "okay";
};

&usi4 {
status = "okay";
};
Expand Down