Building Discussion (Non-commercial use only)

[arithmaldor]

I'm going to try my hand at building one of these. I am logging my progress here. If anyone sees any issues or things I get wrong please let me know, and @charcole has been gracious enough to answer my questions. I will post any further questions here as I go.

[arithmaldor]

So are the 4 LEDs on the front supposed to be IR or are they for decoration? I don't know how they'd function as a sensor bar without being spaced out, or can the Wii remote function with only one point of reference?

[arithmaldor]

Found the answer
#1 (comment)
Only needs location, not rotation, so it works with one spot

[charcole]

Yes, sorry you beat me to it. I've been thinking recently about adding better software support for standard light bars too but I've not had much problem with the single reference point.

The LEDs needs to be IR as you worked out. They just work together to form one big spot. I'd suggest using 940nm IR LEDs as I think the Wiimote is more sensitive to them. Also get ones with the biggest spread you can find so it'll work from more angles.

[arithmaldor]

PCB fab takes a while, should have gone with express shipping from jlcpcb. It is so funny to me that the pcb files specifically say "manufacturere marks on this side please" and they still put them on the outside. Front and back panels are the only ones here, main board should be here next week and I can start building. @charcole is there any documentation on the cables? I have all of the systems supported or soon to be supported by just wii remote except saturn (sold sadly). I think I have an ethernet crimper around here somewhere...

[charcole]

Yeah, I normally have to specifically request manufacturer's marks on the rear silkscreen. Only used pcbway but they've done followed the instructions every time so far. As you saw I also added it on the silkscreen to try and make extra sure.

There isn't good documentation on cables at the moment but I'm hoping to get that done soon. I've got to make some guides for the person manufacturing the commercial cables so I should be able to put the same documentation up.

[arithmaldor]

Finished the build, just waiting on a programmer. I've got some other projects going on so I'm not in a big rush to build the cables, I'll make them whenever the guides are ready. Turned out really well I think:
https://tinkerplunk.files.wordpress.com/2018/09/20180925_001023.jpg

[charcole]

Awesome! Well done, Jacob! I’ll get the cable plans ready as soon as I can. Hope you enjoy it when it’s finished!

…

On 27 Sep 2018, at 17:43, Jacob Proctor ***@***.***> wrote: Finished the build, just waiting on a programmer. I've got some other projects going on so I'm not in a big rush to build the cables, I'll make them whenever the guides are ready. Turned out really well I think. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.

[arithmaldor]

Hey @charcole I've got the board assembled but I'm not experienced with programming or compiling the firmware. I downloaded the toolchain, pointed it at the folder, and used the make command but got nothing. I'll have to look and see exactly what error I got, but do you have any tips?

Also, this is the programmer I got, but I'm not exactly sure which lines to hook up or if this is the right kind.

[SuperVehicle-001]

Hi @charcole, thank you for making your project open source (non-commercial). I think my board is mostly functional. It displays the logo overlay w/ composite in/out setup. I messed around a little with csync input for RGB setup, but really have no idea how to proceed from here with pairing wiimotes and building cables. Thanks @arithmaldor for the blog write-up, would not have attempted without it.

[arithmaldor]

Awesome work @SuperVehicle-001 ! Any tips on programming? That's where I stalled as I have next to no experience with that.

[Heath3827]

Do you have more concise instructions on how to build? A proper diagram and parts list? I'd like to build one but as a hobbyist (not an engineer or programmer) I would need more monkey see - monkey do instructions, preferably not using surface mount components (I have no experience soldering such tiny components). Otherwise is there the ability to acquire a unit? I just want to play Duck Hunt and Metal Combat again.

[arithmaldor]

my build log is about as step by step as you're going to get, and the board is designed with surface mount components, so you're not going to get through hole parts without redesigning the whole thing. Can be reserved at lightgunverter.com

[IDBurner]

@arithmaldor Did you ever have luck with the programmer?

Also can anyone point me in a direction to make a Dreamcast Cable for this?

[pattonthompson]

Arithmaldor your build guide is awesome. I can handle the soldering. I too am not sure about the programming. Can anyone provide instructions on how to do the programming and flash the firmware? Would be greatly appreciated!