ID_cloner

Board : ESP32-S3 using RC522 sensor clone the ic card UID to another new card

RFID

• install library
  • LiquidCrystal
  • MFRC522
• setup sensor
  • I2C LCD display
  • rc522

        // using print pin info to check these pin number
        Serial.print("MOSI: ");
        Serial.println(MOSI);
        Serial.print("MISO: ");
        Serial.println(MISO);
        Serial.print("SCK: ");
        Serial.println(SCK);

result

• when boot up

• scan original card to record uid, than red light lights on means you can scan the new card and write the UID into it's block 0

• when the green light lights on means the UID is copy completely