docs: iDRAC unreachable, gps3 smartd verified, archive push planned #62
There are no files selected for viewing
| Original file line number | Diff line number | Diff line change |
|---|---|---|
|
|
@@ -8,6 +8,102 @@ diagnosis corrected), 07-15 (migration/scan kicked off), 07-14 (clean | |
| shutdown, VADASE PRs, EVACUATE verdict), 07-13 (RAW done), 07-08 (freeze), | ||
| 07-07 (excavation+crossref), 07-04 (DA-005).** | ||
|
|
||
| ## 🔴 2026-07-30 (late) — iDRAC HAS NO IP; blocks two things | ||
|
|
||
| `sudo ipmitool lan print 1` on gps3: | ||
|
|
||
| ``` | ||
| IP Address Source : DHCP Address | ||
| IP Address : 0.0.0.0 <-- asked DHCP, got nothing | ||
| Default Gateway : 0.0.0.0 | ||
| MAC Address : b0:7b:25:fe:2c:38 (all four OS NICs are e4:3d:1a:... — | ||
| confirms a genuinely separate NIC) | ||
| ``` | ||
|
|
||
| The BMC is alive (`/dev/ipmi0`, 5 ipmi modules loaded, PowerEdge R740) but has | ||
| **no network address**, so iDRAC is unreachable. Either the dedicated port is | ||
| uncabled or it is on a VLAN with no DHCP. **Consequences:** | ||
|
|
||
| 1. **The patrol-read question cannot be answered** (see gps3's session log | ||
| §12.4) — and no vendor CLI exists on the box to answer it another way | ||
| (`storcli`/`perccli`/`megacli` have no apt candidate; backplane not exposed | ||
| via SES). If patrol read is disabled then **nothing performs a full-surface | ||
| read of the 16 members**, and a latent bad sector surfacing during a rebuild | ||
| is exactly what kills 16-wide RAID 5. | ||
| 2. **No remote recovery before the pending reboot.** Kernel `6.8.0-136` is | ||
| installed, `6.8.0-111` running; that first reboot is also the first real test | ||
| of the rewritten fstab. If it drops to an emergency shell, SSH cannot help — | ||
| SSH needs a booted OS. **Fix iDRAC BEFORE rebooting**, or accept a trip to | ||
| the server room. | ||
|
|
||
| Fix (needs sudo on gps3; `ipmitool` is in the Ubuntu archive): | ||
| ```bash | ||
| sudo ipmitool lan set 1 ipsrc static | ||
| sudo ipmitool lan set 1 ipaddr 192.168.48.<free> | ||
| sudo ipmitool lan set 1 netmask 255.255.255.0 | ||
| sudo ipmitool lan set 1 defgw ipaddr 192.168.48.5 | ||
| sudo ipmitool lan set 1 access on | ||
| sudo ipmitool user list 1 # then CHANGE PASSWORDS | ||
| ``` | ||
|
Comment on lines
+41
to
+47
There was a problem hiding this comment. 🔒 Security & Privacy | 🟠 Major | ⚡ Quick win 🧩 Analysis chain🏁 Script executed: #!/bin/bash
set -euo pipefail
echo "Files matching RESUME_NEXT.md:"
git ls-files | grep -F 'RESUME_NEXT.md' || true
if [ -f RESUME_NEXT.md ]; then
echo
echo "RESUME_NEXT.md lines 1-120:"
nl -ba RESUME_NEXT.md | sed -n '1,120p'
fi
echo
echo "Search for RESUME_NEXT.md references:"
rg -n "RESUME_NEXT|ipmitool|set 1 access on|CHANGE PASSWORDS|netaddr|netmask|free" . --glob '!node_modules' --glob '!dist' --glob '!build' || trueRepository: alfieprojectsdev/movefaults Length of output: 281 🏁 Script executed: #!/bin/bash
set -euo pipefail
echo "RESUME_NEXT.md lines 1-120:"
awk '{printf "%6d\t%s\n", NR, $0}' RESUME_NEXT.md | sed -n '1,120p'
echo
echo "Search for RESUME_NEXT.md references and ipmitool content:"
grep -RInE "RESUME_NEXT|ipmitool|set 1 access on|CHANGE PASSWORDS|user list|free|ipaddr|netmask" . --exclude-dir=node_modules --exclude-dir=dist --exclude-dir=build || trueRepository: alfieprojectsdev/movefaults Length of output: 50384 🏁 Script executed: #!/bin/bash
set -euo pipefail
# Focused reads: first 80 lines and the exact ipmitool block only.
printf '-------- RESUME_NEXT.md lines 1-80 --------\n'
awk '{printf "%6d\t%s\n", NR, $0}' RESUME_NEXT.md | sed -n '1,80p'
printf '\n-------- RESUME_NEXT.md ipmitool block references --------\n'
grep -nE 'ipmitool|CHANGE PASSWORDS|access on|user list|free|ipaddr|netmask' RESUME_NEXT.md
printf '\n-------- Read-only validation of cited command order/nature --------\n'
python3 - <<'PY'
from pathlib import Path
lines = [(i+1, line.rstrip('\n')) for i, line in enumerate(Path('RESUME_NEXT.md').read_text().splitlines())]
for n,line in lines:
if 'access on' in line or 'user list' in line or 'ipaddr' in line or 'netmask' in line:
print(f'{n}: {line}')
for idx,(n,line) in enumerate(lines):
if '<free>' in line:
print(f'<free> occurrence: {n}: {line}')
token = line.split()[-1] if line.split() else ''
print(f'last token is digit-only IP octet placeholder={token.isdigit()}')
PYRepository: alfieprojectsdev/movefaults Length of output: 256 🏁 Script executed: #!/bin/bash
set -euo pipefail
echo '-------- RESUME_NEXT.md lines 1-80 --------'
awk '{printf "%6d\t%s\n", NR, $0}' RESUME_NEXT.md | sed -n '1,80p'
echo
echo '-------- RESUME_NEXT.md ipmitool block references --------'
grep -nE 'ipmitool|CHANGE PASSWORDS|access on|user list|free|ipaddr|netmask' RESUME_NEXT.md
echo
echo '-------- Read-only validation of cited command order/nature --------'
python3 - <<'PY'
from pathlib import Path
lines = [(i+1, line.rstrip('\n')) for i, line in enumerate(Path('RESUME_NEXT.md').read_text().splitlines())]
for n,line in lines:
if 'access on' in line or 'user list' in line or 'ipaddr' in line or 'netmask' in line:
print(f'{n}: {line}')
for n,line in lines:
if '<free>' in line:
print(f'<free> occurrence: {n}: {line}')
token = line.split()[-1] if line.split() else ''
print(f'last token is digit-only IP octet placeholder={token.isdigit()}')
PYRepository: alfieprojectsdev/movefaults Length of output: 7002 🌐 Web query:
💡 Result: If the ipmitool user list command is failing or not displaying the expected output, it is often due to an issue with the channel parameter or the BMC's response to an in-band (local) request [1]. When you run ipmitool user list without arguments, the command defaults to using channel 0x0E (often representing the current channel) [2]. If your system does not support this default, the command may return an error such as Invalid data field in request [1]. To troubleshoot or resolve this: 1. Specify a Channel: Try explicitly defining the channel number [1]. Many users find success by testing specific channels (e.g., 1, 2, or 7) [1][3]. Use the command: ipmitool user list <channel_number> 2. Check Network Interface: If you are running the command in-band (locally on the machine), some BMC implementations struggle with the request [1]. If possible, test the command over the network using the lanplus interface [1][4]: ipmitool -I lanplus -H <BMC_IP> -U -P user list 3. Summary Command: If you only need to see user counts and configuration availability rather than a full list of users, you can try the summary command: ipmitool user summary The ipmitool user list command is designed to return a table containing the User ID, Name, Callin, Link Authorization, IPMI Messaging status, Channel, Privilege Level, and Limit [5][1]. If you are still not seeing this output after specifying a valid channel, the issue is likely a limitation of your specific BMC hardware or firmware [1]. Citations:
Move credential hardening before enabling BMC network access.
🤖 Prompt for AI Agents |
||
| ⚠ **Security first:** iDRAC has full control of the server (power, console, | ||
| boot device). Dell's default login is well known and unprotected BMCs are a | ||
| standard target. Change the password and the SNMP community string (currently | ||
| the factory default `public`) BEFORE it touches a network, and keep it off | ||
| anything internet-facing. Auth is MD5-only on this firmware. | ||
|
|
||
| ## ✅ 2026-07-30 — gps3 smartd COMPLETE, alert path proven | ||
|
|
||
| All 16 members monitored (`smartd -q onecheck` = 16/16), `20log` hook installed, | ||
| and the alert path **tested end to end** — a synthetic alert landed in both | ||
| journald and `/var/log/smartd-alerts.log`. That test mattered: the log was 0 | ||
| bytes beforehand, so the path had never actually run. | ||
|
|
||
| **Conceded to gps3 on `-m root`:** `COORDINATION.md` §7 told them not to use it. | ||
| They used `-m root -M exec smartd-runner` anyway and were right — `-M exec` | ||
| *replaces* mailing rather than supplementing it, `smartd-runner` run-parts | ||
| `run.d/` where `20log` writes both sinks, and `10mail` merely exits 1 (noise, | ||
| not lost alerts). It is also the distro-idiomatic form. §7's substance — an | ||
| externally observable non-mail sink, proven working — is met. | ||
|
|
||
| **Real remaining gap (theirs, honestly flagged):** no long self-tests are | ||
| scheduled at all, only daily staggered short tests. The justification (PERC | ||
| patrol read covers surface scanning) is **unverified** and cannot be verified | ||
| until iDRAC works. If patrol read is off, add staggered long tests: | ||
| `-s (S/../.././NN|L/../../6/NN)`. | ||
|
|
||
| Housekeeping: `sudo truncate -s 0 /var/log/smartd-alerts.log` to clear the | ||
| synthetic TEST entry so no future reader mistakes it for a real warning. | ||
|
Comment on lines
+74
to
+75
There was a problem hiding this comment. 🗄️ Data Integrity & Integration | 🟠 Major | ⚡ Quick win Avoid truncating the entire alert log.
🤖 Prompt for AI Agents |
||
|
|
||
| ## ⏸ 2026-07-30 — archive push to gps3: PLANNED, NOT STARTED | ||
|
|
||
| gps3 proposed the push; receiving side is ready (idle, no BPE, 20 TB free). | ||
| **Three corrections to that plan, from verifying it on the T420:** | ||
|
|
||
| 1. **`mount -o remount,ro` will likely fail.** DOSTB is `fuseblk` (ntfs-3g via | ||
| udisks2), and FUSE does not reliably honour `remount,ro`. Verify it actually | ||
| took effect (`findmnt -no OPTIONS`) rather than assuming; if it silently | ||
| stays rw, that is acceptable — rsync only reads the source — but do not | ||
| *believe* the source is protected when it is not. | ||
|
Comment on lines
+82
to
+86
There was a problem hiding this comment. 🗄️ Data Integrity & Integration | 🟠 Major | ⚡ Quick win 🧩 Analysis chain🏁 Script executed: #!/bin/bash
set -euo pipefail
echo "== file exists and relevant lines =="
if [ -f RESUME_NEXT.md ]; then
nl -ba RESUME_NEXT.md | sed -n '70,95p'
else
echo "RESUME_NEXT.md not found"
fi
echo
echo "== search for DOSTB/rsync/remount/snippet context =="
rg -n "DOSTB|ntfs-3g|fuseblk|remount,ro|remount|findmnt|rsync|checksum|census|preservation|checksum set|immutable|snapshot" RESUME_NEXT.md || true
echo
echo "== git diff/stat for context =="
git diff --stat HEAD~1..HEAD 2>/dev/null || true
git diff -- RESUME_NEXT.md | sed -n '1,220p' || true
echo
echo "== nearby file snippets for rsync commands =="
rg -n -C 3 "rsync|sha256|sha512|blkid|mount -o remount|findmnt" RESUME_NEXT.md || trueRepository: alfieprojectsdev/movefaults Length of output: 242 🏁 Script executed: #!/bin/sh
set -euo pipefail
echo "== file exists and relevant lines =="
if [ -f RESUME_NEXT.md ]; then
sed -n '70,95p' RESUME_NEXT.md | awk '{printf "%4d\t%s\n", NR+69, $0}'
else
echo "RESUME_NEXT.md not found"
fi
echo
echo "== search for DOSTB/rsync/remount/snippet context =="
grep -RIn "DOSTB\|ntfs-3g\|fuseblk\|remount,ro\|remount\|findmnt\|rsync\|checksum\|census\|preservation\|checksum set\|immutable\|snapshot" RESUME_NEXT.md || true
echo
echo "== git diff/stat for context =="
git diff --stat HEAD~1..HEAD 2>/dev/null || true
git diff -- RESUME_NEXT.md | sed -n '1,220p' || true
echo
echo "== nearby file snippets for rsync commands =="
grep -RIn -C 3 "rsync\|sha256\|sha512\|blkid\|mount -o remount\|findmnt" RESUME_NEXT.md || trueRepository: alfieprojectsdev/movefaults Length of output: 18923 🌐 Web query:
💡 Result: When using ntfs-3g, the filesystem type is typically reported as fuseblk in /proc/mounts because it operates as a FUSE (Filesystem in Userspace) driver [1][2][3]. The behavior regarding remounting and read-only/read-write transitions is governed by specific limitations of the FUSE implementation and the internal state of the NTFS driver [4][5]. Remounting Limitations In most cases, remounting an active ntfs-3g filesystem (e.g., using mount -o remount,rw or mount -o remount,ro) is not supported [6][5]. Attempting to do so may return an error indicating that remounting is not supported or may appear to succeed without actually changing the mount state [5]. To change the read/write status of a partition, you must typically unmount the filesystem completely and then remount it with the desired options [6][5]. Forced Read-Only Behavior If ntfs-3g forces a read-only mount, it is almost always because the driver has detected that the NTFS volume is in an "unsafe" state [7][2]. This commonly occurs if: 1. Windows was not shut down fully (e.g., hibernation is enabled, or "fast startup" is active) [7][8]. 2. The filesystem was not cleanly unmounted previously [2]. To resolve this and restore read/write access: - Disable "fast startup" and hibernation in Windows by running the command powercfg /h off in an Administrator command prompt [7][8]. - If you are on Linux and need to mount the drive read-only explicitly, use the ro option during the initial mount command (e.g., mount -t ntfs-3g -o ro /dev/sdX /mnt/target) [6][9]. Note on fuseblk The fuseblk label is a byproduct of how FUSE communicates with the kernel [1]. Because ntfs-3g is a user-space driver, it passes its own options to the FUSE kernel module [1][3]. Standard mount command outputs or /proc/mounts may show fuseblk and a different set of options than what you provided in your fstab or initial command, as these reflect the FUSE layer's view of the mount rather than the driver's internal configuration [1][2]. To verify the actual options used by the ntfs-3g process, you can check the process command line (e.g., pgrep -a ntfs-3g) [1]. Citations:
Do not accept a writable DOSTB mount for the preservation push. A FUSE 🤖 Prompt for AI Agents |
||
| 2. **Scope is 4 directories, not one.** `RECOVERED_SEAGATE_W2A0W9T2_DATA0` | ||
| (131 G), `RECOVERED_HD-LBU2_...` (14 G), `RECOVERED_DOSTB20150918_from_BackupPlus` | ||
| (9 G), `RECOVERED_GPS_1TB_2_...` (3 G) = **~157 G total**. Decide whether all | ||
| four go, and preserve the directory names — they encode provenance | ||
| (which drive each was recovered from), which is exactly what an archive | ||
| manifest needs. | ||
| 3. **Duration: ~4.4 h for all four** at the measured **10 MB/s** over | ||
| `GNSS_5G2` wifi. That link has dropped twice in one day. Use tmux (their | ||
| plan does) and expect at least one resume. A direct cable into one of gps3's | ||
| three unused gigabit NICs would cut this to ~30 min — worth considering | ||
| before committing 4+ hours to wifi. | ||
|
|
||
| Their flag choices are sound: `-aH` (hardlinks), `--partial` (resumable), and | ||
| **no `-z`** because the bottleneck is the drive and GNSS data is already | ||
| largely compressed. Agreed on all three. Two additions: | ||
| - Census source **and** destination and compare files/symlinks/dirs/bytes — | ||
| `rsync` exit=0 is not proof (this project lost a session to that). | ||
| - Generate `sha256` manifests after landing. That is the Tier-0 fixity item and | ||
| the copy is worthless as a preservation copy without it. | ||
|
Comment on lines
+102
to
+105
There was a problem hiding this comment. 🗄️ Data Integrity & Integration | 🟠 Major | ⚡ Quick win Record the checksum manifest in git as well as beside the archive. The archive onboarding requirement calls for the 🤖 Prompt for AI Agents |
||
|
|
||
| ## ✅ 2026-07-30 — branch split closed, branching policy adopted | ||
|
|
||
| **PR #57 merged.** `main` advanced `bc7b5b9` → `11315ee` and now holds the | ||
|
|
||
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
📐 Maintainability & Code Quality | 🟡 Minor | ⚡ Quick win
Specify the fenced-block language.
Add
bashafter the opening fence so Markdown tooling and readers can identify the command syntax.🧰 Tools
🪛 markdownlint-cli2 (0.23.1)
[warning] 15-15: Fenced code blocks should have a language specified
(MD040, fenced-code-language)
🤖 Prompt for AI Agents
Source: Linters/SAST tools