EdgeNest Router — Releases

EdgeNest Router（iStoreOS / OpenWrt 软路由面板）的下载与自升级源。最新安装包见 Releases。

This repository hosts the EdgeNest Router (iStoreOS / OpenWrt panel) downloads and its self-upgrade feed (router-version.json). Get the latest package from Releases.

安装 / Install

1. 下载对应架构的 edgenest-router_<版本>_<架构>.ipk（首次安装还需 edgenest-router-core 包），传到路由器后执行 opkg install。

2. 安装后访问 http://<路由器地址>:1123 打开面板；面板内 关于 → 检查更新 可在线升级。

3. Download the edgenest-router_<version>_<arch>.ipk for your architecture (a fresh install also needs the edgenest-router-core package), copy it to the router, and run opkg install.

4. After installing, open the panel at http://<router-address>:1123; upgrade in place any time from About → Check for updates.

配合使用 / Works with

路由器版负责整个局域网的分流，也可以作为「组网」的远程接入点与跨设备同步的常驻中转。它与下面两个项目各自独立，也各自可用，版本号互不相同：

• EdgeNest 服务端 —— 在自己的服务器上部署，生成节点与订阅。
• EdgeNest 客户端（macOS / Windows / Android / iOS） —— 在外的设备拨入组网后如同在家，并可一键加入本机的同步中转。

---

The router build routes a whole LAN, and can also act as the mesh's remote access point and the always-on relay for cross-device sync. It stands on its own alongside these two, each versioned independently:

• EdgeNest server — deploy on your own server; it issues the nodes and subscriptions.
• EdgeNest clients (macOS / Windows / Android / iOS) — devices away from home dial into the mesh and behave as if on-site, and can join this router's sync relay in one tap.