X.Tips

愿小键盘给你带来大快乐

原创小键盘工匠室 ｜ 专注硬件极简，好用可靠的原创小键盘。 两年闲鱼 90+产品，3000+ 单，500+ 粉丝，L7顶级鱼小铺。不靠营销，只靠口碑。 https://www.goofish.com/personal?userId=137976734

May a small keyboard bring you great joy

Original mini keyboards. Minimal hardware, built to last. 3,000+ orders on Xianyu in two years, L7 Top-Tier Seller. Word of mouth only. URL: www.umux.com

---

修改键位：

• 支持的键盘：p20n / p31n / p48n / p61n / x35n / x36n / x3n2
• 在线改键位：连 USB 打开网站https://zmk.studio/， 实时修改，不用重新编译
• 改代码刷机：可安装本地编译环境，或使用以下的github Actions方式编译固件
  1. 改键 - 编辑对应键盘的 .keymap 文件。
  2. 编译 - Actions → Run workflow → 选键盘型号。
  3. 下载 - 等待编译完成，下载 .uf2 文件。
  4. 刷入 - 连电脑后，按一下 Bootloader 键，或打开后盖按 Reset 两次，把 .uf2 拖进出现的 U 盘。
• 注：也在Github Codespace的终端运行bash setup.sh安装ZMK编译环境，运行build.sh生成固件。

Edit Keymap

• Supported Keyboards: p20n / p31n / p48n / p61n / x35n / x36n / x3n2

• Edit Keymap Online: Connect via USB and open https://zmk.studio/ – modify your keymap in real time, no need to recompile.

• You can build the firmware locally, or use the GitHub Actions workflow below.

  1. Edit keymap – Modify the .keymap file for your keyboard.
  2. Build – Go to Actions → Run workflow → Select your keyboard model.
  3. Download – Wait for the build to finish, then download the .uf2 file.
  4. Flash – Connect to your computer，press the Bootloader key once, or open the back cover and press Reset twice. Drag and drop the .uf2 file into the USB drive that appears.

• Alternatively, you can run bash setup.sh in the Github Codespace terminal to install the ZMK build environment for editing and run build.sh for generating firmware.