Sparky Stereo OS

This is the stereo version of MLT by Sparky Stereo OS, forked from mltframework/mlt. It reads and writes the stereoscopic 3D packing of a video, as the H.264 and H.265 frame packing SEI and Matroska StereoMode carry it, and adds a filter that unpacks it.

Where it comes from:

• MLT is made by Meltytech, LLC and its contributors. Its authors include Charles Yates and Dan Dennedy; see AUTHORS.
• Debian is the base of the system.
• SparkyLinux, by Paweł "pavroo" Pijanowski, builds on Debian.
• Sparky Stereo OS is the stereo 3D edition of SparkyLinux: SparkyOS, powered by Debian.

The stereo3d-7.40 branch holds the version the distribution builds. The branch starts from MLT 7.40.0. The licence is unchanged; see COPYING.

Sparky Stereo OS, Daniel Ramos's edition of SparkyLinux (by Paweł "pavroo" Pijanowski).

---

MLT FRAMEWORK

MLT is a LGPL multimedia framework designed for video editing.

This document provides a quick reference for the minimal configuration, build and installation of MLT.

See the docs/ directory for usage details.

See the website for development details and a contributing guide.

---

Development Environment (Dev Container)

This repository provides a standardized development environment using the Development Containers specification. It is compatible with VS Code, CLion, DevPod, and other IDEs supporting the .devcontainer standard.

Prerequisites

• Docker (or Podman)
• An IDE with Dev Container support.

Hardware Acceleration and Audio Support

By default, the container runs in Restricted Mode (secure/headless). In this mode:

• Audio is routed to a dummy driver (no sound).
• GPU access might be limited to software rendering.

Enabling Real Hardware Access

To enable Full GPU Acceleration (DRI) and Physical Audio (ALSA/PulseAudio/PipeWire), follow these steps:

1. Modify devcontainer.json: Uncomment the following lines inside the runArgs array:

   "--ipc=host",
   "--privileged"

   • What this does: --ipc=host allows shared memory access for high-performance video frames, and --privileged grants the container direct access to host devices (GPU nodes and Sound Cards).

2. Trigger a Rebuild: Changes to runArgs require a container recreation.

   • In VS Code: Run the command Dev Containers: Rebuild Container.
   • In CLion: Select Restart and Rebuild Container.

3. Switch the Audio Driver: The Dockerfile defaults to SDL_AUDIODRIVER=dummy. Once in privileged mode, you must tell the MLT consumer to use a real driver:

   • Temporary (CLI):

   SDL_AUDIODRIVER=alsa melt video.mp4

   • Permanent: Edit the ENV SDL_AUDIODRIVER line in your .devcontainer/Dockerfile to alsa or pulseaudio.

Warning: Using --privileged mode reduces the security isolation between the container and your host machine. Use it only when real-time hardware playback is required for development.

---

Configuration

Configuration is triggered by running CMake from inside a build directory, not from the project root.

mkdir -p build
cd build
cmake ..

Alternatively, you can configure CMake with Ninja:

cmake -G Ninja ..

More information on usage is found by viewing CMakeLists.txt and the CMake manual page.

---

Compilation

Once configured, it should be sufficient to run:

cmake --build .

Alternatively, you can compile with Ninja:

ninja

Alternatively, you can compile using CMake or Ninja with one less CPU core (recommended only on systems with many CPU cores):

cmake --build . --parallel $(($(nproc) - 1))
# or
ninja -j $(($(nproc) - 1))

All generated files (Makefiles, Ninja files, cache, object files, binaries) will remain inside the build/ directory.

---

Testing

To execute the MLT tools without installation, or to test a new version on a system with an already installed MLT version, run:

source ../setenv
ctest --output-on-failure # -j $(($(nproc) - 1))

NB:

• This applies to the current shell only
• It assumes a bash or Bourne-compatible shell is in use
• The command must be executed from inside the build/ directory

---

Installation

Installation is triggered by running:

sudo cmake --install .

This installs the files generated in the build/ directory, without affecting the project source tree.

Note: After installation, some Linux systems may require running sudo ldconfig to refresh the shared library cache, especially if the install prefix is not already part of the system linker configuration.

---

Summary

mkdir build
cd build
cmake ..
cmake --build .
source ../setenv
ctest --output-on-failure
sudo cmake --install .

This approach keeps the source tree clean and allows the entire build to be removed safely by deleting the build/ directory.

---

More Information

For more detailed information, please refer to https://mltframework.org/docs/install/.