BW16-Ping

Ping and traceroute ip's using BW16 (RTL8720DN)

Hardware Requirements

• Ai-Thinker BW16 RTL8720DN Development Board

Setup

1. Download Arduino IDE from here according to your Operating System.

2. Install it.

3. Go to File → Preferences → Additional Boards Manager URLs.

4. Paste the following link :

   https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json
   

5. Click on OK.

6. Go to Tools → Board → Board Manager.

7. Search Realtek Ameba Boards (32-Bits ARM Cortex-M33@200MHz) by Realtek.
   !!! CODE WORK WITH 3.1.7 pack, other versions may not be work !!!

8. Install it.

9. Restart the Arduino IDE.

10. Done!

Install

1. Download or Clone the Repository.
2. Open the folder and open ping_traceroute_bw16.ino in Arduino IDE.
3. Enter you data in: "WiFi.begin("u_ssid", "u_pass")"
4. Select board from the Tools → Board → AmebaD ARM (32-bits) Boards.
   • It is Ai-Thinker BW16 (RTL8720DN).
5. Select the port of that board.
6. Go to Tools → Board → Auto Flash Mode and select Enable.
7. Upload the code.
   • Open Serial Monitor (115200) and write "ping IP" or "trace IP"

Note

Dont work with domain, only IPs
Code for educational purposes, good luck