Skip to content

About

Hear whether your Blue Yeti microphone is muted. A small Windows program that announces mute and unmute by speech.

Topics

Resources

Stars

1 star

Watchers

0 watching

Forks

Latest commit

 

History

3 Commits

Folders and files

Repository files navigation

Yeti Mute Talker

Hear whether your Blue Yeti is muted, without having to see it.

Yeti Mute Talker is a small, free Windows program for people who own a Blue Yeti microphone. Every time you press the mute button on the front of the mic, it tells you out loud whether the mic is now muted or live.

The Yeti shows its mute state only with a light on the mic, which is easy to miss and impossible to see if you're blind. Miss it and you end up with a silent recording. If you use a screen reader, sit away from your mic, or just don't want to check the light before every recording or stream, this program is for you.

Download

Get the latest YetiMuteTalker-windows.zip from the Releases page. Unzip it and keep the files together: YetiMuteTalker.exe and prism.dll, which lets it speak through your screen reader. There is nothing to install.

What it does

  • Press the Yeti's mute button and you hear:
    • two falling beeps, then "Microphone muted"
    • two rising beeps, then "Microphone live"
  • It works from any app, even while you're recording, streaming or gaming.
  • It tells you when the mic is unplugged or plugged back in.
  • Hotkeys let you check the mic any time without touching it.
  • If NVDA or JAWS is running, it speaks through your screen reader, in your own voice and speed, and shows the message on a braille display. Otherwise it uses a Windows voice.
  • You can pick any Windows voice installed on your computer, and its speed.
  • It has no window. It runs quietly in the notification area (system tray), with a menu that works from the keyboard.

Who it's for

This program is made for Blue Yeti microphones, and it has been tested with the Yeti Stereo Microphone. On these mics the mute button works inside the microphone, and Windows is never told that the mic is muted. That's why the usual Windows tools can't tell you the mute state, and why this program exists.

Other USB microphones with a hardware mute button may work too, because the program listens for the mic going silent. Only the Yeti has been tested.

Requirements

  • Windows 10 or Windows 11, 64-bit
  • A Blue Yeti microphone plugged in over USB

Getting started

  1. Download the ZIP from Releases and unzip it.
  2. Put the YetiMuteTalker folder somewhere permanent, such as your Documents folder. Keep prism.dll next to YetiMuteTalker.exe.
  3. Run YetiMuteTalker.exe. Windows may warn that the program is unrecognized, because it isn't signed. Choose More info, then Run anyway.
  4. The first time it runs, a short spoken setup of about 10 seconds teaches the program what your mic sounds like:
    • Stay quiet while it listens.
    • When it asks, press the mute button on your Yeti once, then stay quiet again.
    • It says "Done" and tells you whether the mic is muted or live.
  5. That's it. Press the Yeti's mute button and it announces the change.

Hotkeys

These work from any app.

Keys What it does
Ctrl + Alt + M Say whether the mic is muted right now
Ctrl + Alt + L Say the current sound level (for troubleshooting)
Ctrl + Alt + C Run the setup again
Ctrl + Alt + Shift + M Close Yeti Mute Talker

Screen readers and voices

Yeti Mute Talker uses the Prism screen reader library:

  • When NVDA or JAWS is running, announcements go through your screen reader, and to your braille display if you use one.
  • When no screen reader is running, a Windows voice speaks instead.

From the tray menu you can:

  • Speak with: choose Always the Windows voice if you'd rather the mic announcements sound different from your screen reader.
  • Windows voice: pick any installed voice. Voices marked "newer voice" are the more natural Windows 10 and 11 voices.
  • Windows voice speed: from Slow to Very fast.

Tray menu

Press Windows + B to move to the notification area, find Yeti Mute Talker with the arrow keys (it may be under "Show hidden icons"), and press Enter. The menu lets you:

  • hear the microphone status
  • hear the sound level
  • choose how it speaks, and which voice and speed
  • run the setup again
  • turn the beeps on or off
  • make it start automatically with Windows
  • open the settings folder
  • exit

Running YetiMuteTalker.exe again while it's already running doesn't start a second copy. It just tells you the current mic status.

How it works

The Yeti's mute button doesn't tell Windows anything, so Yeti Mute Talker listens to the microphone instead. A live mic always picks up a tiny bit of room sound, while a muted Yeti sends complete silence. The program watches for that difference.

  • When the mic has been sending the dead silence of the mute button for 1 second, the mic is muted.
  • Gaps where Windows delivers no sound at all — for example while a recording program has taken over the mic, or just after a recording ends — are ignored. They never count as muted, so the program won't announce a change you didn't make.
  • When steady sound comes through for about half a second, the mic is live again. A bump, a touch or moving the mic is too short to count, so it won't trick the program into saying live.

The setup step measures your own mic and room, so the program knows where the line between muted and live falls.

Privacy: the program only measures how loud the sound is. Nothing is recorded, saved or sent anywhere. While it runs, Windows will show that an app is using your microphone. That's expected.

Settings

Settings are kept in %APPDATA%\YetiMuteTalker\settings.ini. Use Open settings folder in the tray menu to get there, and open the file in Notepad. You can change:

  • the words it says for muted and live
  • whether it speaks through your screen reader or a Windows voice
  • the Windows voice and its speed
  • whether it plays the beeps
  • how long the mic must be silent to count as muted
  • how long sound must last to count as live again
  • which microphone it watches (it looks for a mic with "Yeti" in its name)

Restart Yeti Mute Talker after editing.

Troubleshooting

  • It says muted when the mic is live. Make sure Windows lets desktop apps use the microphone: Settings > Privacy & security > Microphone.
  • It misses button presses, or announces the wrong state. Run the setup again with Ctrl + Alt + C, and stay as quiet as you can. Do the same if you turn the Yeti's gain knob a lot.
  • A hotkey doesn't work. Another program may already be using it.
  • It announces mute or live by itself. Make sure only one copy is running. Version 1.2 automatically closes the old PowerShell version (YetiMuteTalker.ps1) and turns off its automatic start. Every change is now written to the log with the sound level, which helps track down anything left.
  • Something else is wrong. Look in YetiMuteTalker.log in the settings folder, and include what it says when you open an issue.

Building from source

The program is written in Go, and the source is in this repository.

go mod tidy
GOOS=windows GOARCH=amd64 go build -ldflags "-H windowsgui -s -w" -o YetiMuteTalker.exe .

The program also needs prism.dll next to it at runtime. Get it from the prism-windows-x64.zip download of a Prism release (dynamic/release/bin/prism.dll). Without it, the program still works, using a basic Windows voice.

rsrc_windows_amd64.syso holds the program's icon and manifest. It was made from icon.ico and app.manifest with rsrc.

License

Released under the MIT License. See LICENSE.

Prism is by Ethin Probst and is licensed under the Mozilla Public License 2.0. The release download includes its license files.

Yeti Mute Talker is an independent project. It is not made by, affiliated with, or endorsed by Logitech or Blue Microphones. "Blue Yeti" is a trademark of its owner.

About

Hear whether your Blue Yeti microphone is muted. A small Windows program that announces mute and unmute by speech.

Topics

Resources

Stars

1 star

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages