Community-maintained model-specific guides for Jio AirFiber ODU devices (JODU51641, JODU51642, JODU52041, JODU52140, JODU52240, and JODU52540). This repository documents local access, firmware recovery and downgrade, ACS configuration, and companion-app/eSIM workflows. Here, “unlock” refers to documented ODU access and firmware procedures, not carrier or SIM unlocking.
Important
Application credit: HONEY (@H0NEYJI)
Disclaimer: This project is provided for educational, authorized device-management, and legitimate research purposes only. Use it only on devices you own or are explicitly authorized to modify. Do not use this software or any related procedures to interfere with third-party systems, bypass controls, access unauthorized networks, or cause harm to people, property, or services. Always verify the exact model before flashing, and comply with all applicable local laws, manufacturer requirements, and service agreements. The maintainers provide this repository as-is without warranty and are not responsible for misuse, loss, or damage caused by improper use.
Warning: Flashing an incorrect image or interrupting a firmware write can brick the device.
| Model | Access / update method | Guide |
|---|---|---|
| JODU51641 | USB-C → Fastboot → recovery/recoveryfs → ADB shell → downgrade → ACS block | 51641 / 51642 |
| JODU51642 | USB-C → Fastboot → recovery/recoveryfs → ADB shell → downgrade → ACS block | 51641 / 51642 |
| JODU52041 | WebUI firmware update | 52041 |
| JODU52140 | UART shell → post-boot setup → SSH → ACS/CWMP/heartbeat changes | 52140 |
| JODU52240 | WebUI firmware update | 52240 |
| JODU52540 | WebUI firmware update; UART fallback can restore WebUI; persistent ACS-off workflow | 52540 |
The Android app is reported to support nearby ODU discovery and eSIM/device-management features. Download the APK from this external link; the APK is not stored in this repository. See the app guide for setup, compatibility notes, and safe-use guidance.
JIOAF/
├── README.md
├── LICENSE
├── THIRD_PARTY.md
├── configs/
│ └── acs-blocklist.hosts
├── devices/
│ ├── 51641/
│ ├── 51642/
│ ├── 52041/
│ └── 52140/
├── docs/
│ ├── models/
│ └── legacy/
├── scripts/
│ └── generate-checksums.sh
└── tools/
└── fake_sbin/
- Install ADB and Fastboot utilities.
- Connect the ODU over USB-C.
- Run
fastboot devices. - Press/hold reset until the ODU is detected in Fastboot.
- Extract the matching model package.
- Flash the supplied recovery and recoveryfs images.
- Reboot/reset as required and run the supplied ADB helper.
- Obtain the shell.
- Mount the model-specific persistent UBIFS volume.
- Set
major_verto0for the documented downgrade flow. - Add the ACS/FOTA/heartbeat hostname blocklist.
Persistent UBIFS volumes used by the supplied notes:
- JODU51641:
/dev/ubi2_0 - JODU51642:
/dev/ubi1_0
See the full guide.
These models use the WebUI firmware-update workflow documented in their model guides. Always use firmware intended for the exact model and do not interrupt power during flashing.
Initial access is through UART.
Project-documented shell password:
oelinux123
The workflow then installs/uses the supplied post-boot/Dropbear files and edits the persistent ACS/CWMP/heartbeat configuration, including ACS server links and ACS authentication username/password values.
See the 52140 guide.
The shared blocklist is maintained in:
configs/acs-blocklist.hosts
- 51641: https://mega.nz/file/fR9BnQ6B#WVnFp1jl30lwkedAZ0jBxuslY8dH4EQIwRldCAoyuxU
- 51642: https://mega.nz/file/qUUl3bRY#D0I3uPM_a_uxkVbo0f75bXPpgFsz15qc8Dqas_dxHRo
- 52240: https://gofile.io/d/O8tz9cfA
- 52540: https://gofile.io/d/lJ0PaRWO
External links can expire or change. Prefer publishing SHA-256 checksums alongside firmware files.
See CREDITS.md for full model-by-model attribution.
- 51641: 2.68 KB/S (@Daaru_Chakhna)
- 51642: 2.68 KB/S (@Daaru_Chakhna), Richard Dawkins (@RichardDawkinsIN)
- 52041: HONEY (@H0NEYJI)
- 52140: Bluenecko, HONEY (@H0NEYJI), 2.68 KB/S (@Daaru_Chakhna)
- 52240 / 52540: HONEY (@H0NEYJI)
Original repository documentation and scripts are released under the MIT License.
Firmware, recovery images, vendor packages, and third-party binaries are not relicensed by this repository. See THIRD_PARTY.md.