Daily tests fix

.github/workflows/ci-build.yml

@@ -133,6 +133,7 @@ jobs:
           set -o pipefail
           FQBN="esp32:esp32:esp32s3:UploadSpeed=921600,CDCOnBoot=default,FlashSize=16M,PartitionScheme=noota_ffat,USBMode=default"
 
+          arduino-cli core list
           arduino-cli compile \
             --fqbn "$FQBN" \
             --warnings all \

Config.h

@@ -151,7 +151,7 @@
 #endif
 
 // WiFi Debug Ring Buffer 
-#define WIFI_DEBUG_USE_RINGBUFFER                   1 // Should be use a ring buffer for WiFi Debug messages? helps when using WiFi DCS Mode. If WiFi is not used, this value is ignored anyway. Also, if using CDC + WiFi Debug, this is REQUIRED to avoid CDC stalls
+#define WIFI_DEBUG_USE_RINGBUFFER                   0 // Should be use a ring buffer for WiFi Debug messages? helps when using WiFi DCS Mode. If WiFi is not used, this value is ignored anyway. Also, if using CDC + WiFi Debug, this is REQUIRED to avoid CDC stalls
 #if WIFI_DEBUG_USE_RINGBUFFER
   #define WIFI_DBG_SEND_RINGBUF_SIZE               32 // How many slots in our buffer
   #define WIFI_DBG_MSG_MAXLEN                      64 // Max size for each slot

HID Manager/settings.ini

@@ -2,7 +2,7 @@
 vid = 0xCAFE
 
 [DCS]
-udp_source_ip = 192.168.7.77
+udp_source_ip = 192.168.7.166
 
 [MAIN]
 console = 1

label_creator/creator_prefs.json

@@ -1,5 +1,5 @@
 {
   "last_template": "LABEL_SET_MAIN",
   "last_aircraft": "FA-18C_hornet",
-  "last_label_set": "LABEL_SET_IFEI"
+  "last_label_set": "LABEL_SET_WINGFOLD_TEST"
 }

src/LABELS/LABEL_SET_IFEI/.last_run

@@ -1 +1 @@
-2026-03-18T14:06:43.397880
+2026-03-20T00:53:04.409085

src/LABELS/LABEL_SET_WINGFOLD_TEST/.last_run

@@ -0,0 +1 @@
+2026-03-19T17:52:21.450107

src/LABELS/LABEL_SET_WINGFOLD_TEST/CT_Display.cpp.DISABLED

@@ -0,0 +1,58 @@
+#include "../../Globals.h"
+#include "CT_Display.h"
+#include "DisplayMapping.h"
+
+
+DisplayBufferEntry CT_DisplayBuffers[] = {
+};
+const size_t numCTDisplayBuffers = sizeof(CT_DisplayBuffers)/sizeof(CT_DisplayBuffers[0]);
+
+const DisplayBufferHashEntry CT_DisplayBufferHash[2] = {
+    {nullptr, nullptr},
+    {nullptr, nullptr},
+};
+
+const DisplayBufferEntry* findDisplayBufferByLabel(const char* label) {
+    uint16_t startH = labelHash(label) % 2;
+    for (uint16_t i = 0; i < 2; ++i) {
+        uint16_t idx = (startH + i >= 2) ? (startH + i - 2) : (startH + i);
+        const auto& entry = CT_DisplayBufferHash[idx];
+        if (!entry.label) return nullptr;
+        if (strcmp(entry.label, label) == 0) return entry.entry;
+    }
+    return nullptr;
+}
+
+
+    void renderField(const char* label, const char* strValue,
+                     const DisplayFieldDefLabel* defOverride,
+                     FieldState* stateOverride) {
+        const DisplayFieldDefLabel* def = defOverride ? defOverride : findFieldDefByLabel(label);
+        if (!def) return;
+        if (!def->renderFunc) { debugPrintf("[DISPLAY] No renderFunc for label '%s', skipping\n", def->label); return; }
+
+        FieldState* state = stateOverride;
+        if (!state) {
+            int idx = def - fieldDefs;
+            state = &fieldStates[idx];
+        }
+
+        bool valid = true;
+        if (def->type == FIELD_NUMERIC) {
+            const int value = strToIntFast(strValue);
+            valid = (value >= def->minValue && value <= def->maxValue);
+        }
+        const char* toShow = valid ? strValue : state->lastValue;
+
+        // bound compare/copy by field length, clamp to cache size
+        uint8_t need = def->numDigits ? def->numDigits : 1;
+        if (need > sizeof(state->lastValue)) need = sizeof(state->lastValue);
+
+        if (memcmp(toShow, state->lastValue, need) == 0) return;
+
+        memcpy(state->lastValue, toShow, need);
+        if (def->clearFunc) def->clearFunc(def->driver, def->segMap, *def);
+        def->renderFunc(def->driver, def->segMap, toShow, *def);
+    }
+
+

src/LABELS/LABEL_SET_WINGFOLD_TEST/CT_Display.h

@@ -0,0 +1,23 @@
+// Auto-generated — DO NOT EDIT
+#pragma once
+
+#include "../../../lib/CUtils/src/CUtils.h"
+
+// Buffers and dirty flags for all display fields (global)
+
+extern DisplayBufferEntry CT_DisplayBuffers[];
+extern const size_t numCTDisplayBuffers;
+extern const DisplayBufferHashEntry CT_DisplayBufferHash[];
+const DisplayBufferEntry* findDisplayBufferByLabel(const char* label);
+
+
+    // --- Forward declarations for opaque driver pointer types ---
+    typedef void* DisplayDriverPtr;
+
+    // --- Forward declaration for field def struct (real type in DisplayMapping.h) ---
+    struct DisplayFieldDefLabel;
+    struct FieldState;
+
+    void renderField(const char* label, const char* value, const DisplayFieldDefLabel* defOverride = nullptr, FieldState* stateOverride = nullptr);
+
+

src/LABELS/LABEL_SET_WINGFOLD_TEST/CoverGates.h

@@ -0,0 +1,10 @@
+// CoverGates.h -- Per-label-set cover gate configuration
+// Defines selectors/buttons that are physically guarded by a cover.
+// Edit via the Label Creator tool or manually.
+
+#pragma once
+
+static const CoverGateDef kCoverGates[] = {
+    // { "ACTION", "RELEASE_OR_nullptr", "COVER", CoverGateKind::Selector, delay_ms, close_delay_ms },
+};
+static const unsigned kCoverGateCount = sizeof(kCoverGates) / sizeof(kCoverGates[0]);

src/LABELS/LABEL_SET_WINGFOLD_TEST/CustomPins.h

@@ -0,0 +1,122 @@
+// CustomPins.h - Label-set-specific pin definitions for CockpitOS
+//
+// This file is automatically included by LabelSetConfig.h if present.
+// Uncomment and set ONLY the pins your hardware actually uses.
+// The PIN(X) macro converts S2 pins to S3 equivalents automatically.
+//
+// ============================================================================
+
+#pragma once
+
+// --- Feature Enables --------------------------------------------------------
+#define ENABLE_TFT_GAUGES                         0  // 1 = Enable TFT gauge rendering (only if TFT displays are present)
+#define ENABLE_PCA9555                            0  // 1 = Enable PCA9555 I/O expander logic (only if PCA chips are present)
+
+// --- I2C Pins ---------------------------------------------------------------
+// Used by PCA9555 expanders, OLED displays, or any I2C peripherals.
+// #define SDA_PIN                                PIN(8)
+// #define SCL_PIN                                PIN(9)
+
+// --- HC165 Shift Register ---------------------------------------------------
+// For reading banks of physical switches via daisy-chained 74HC165 chips.
+// HC165_BITS = total number of inputs across all chained chips (8 per chip).
+// Set to 0 or leave commented to disable.
+// #define HC165_BITS                             16
+// #define HC165_CONTROLLER_PL                    PIN(39)  // Latch (PL)
+// #define HC165_CONTROLLER_CP                    PIN(38)  // Clock (CP)
+// #define HC165_CONTROLLER_QH                    PIN(40)  // Data  (QH)
+
+// --- WS2812B Addressable LED Strip ------------------------------------------
+// #define WS2812B_PIN                            PIN(35)
+
+// --- Mode Switch ------------------------------------------------------------
+// HID selector switch for mode control (e.g., rotary or toggle).
+// #define MODE_SWITCH_PIN                        PIN(33)
+
+// --- TM1637 / HT16K33 7-Segment Displays -----------------------------------
+// Pairs of DIO + CLK pins for each 7-segment display module.
+// #define LA_DIO_PIN                             PIN(39)  // Left Angle display DIO
+// #define LA_CLK_PIN                             PIN(37)  // Left Angle display CLK
+// #define RA_DIO_PIN                             PIN(40)  // Right Angle display DIO
+// #define RA_CLK_PIN                             PIN(37)  // Right Angle display CLK
+// #define CA_DIO_PIN                             PIN(36)  // Caution Advisory display DIO
+// #define CA_CLK_PIN                             PIN(37)  // Caution Advisory display CLK
+// #define JETT_DIO_PIN                           PIN(8)   // Jettison Select display DIO
+// #define JETT_CLK_PIN                           PIN(9)   // Jettison Select display CLK
+
+// --- TFT Gauge Display Pins ------------------------------------------------
+// Each TFT gauge needs: CS, DC, MOSI, SCLK (required) + RST, MISO (optional).
+// Use -1 for unused RST/MISO pins.
+//
+// Example (Cabin Pressure gauge):
+// #define CABIN_PRESSURE_CS_PIN                  PIN(36)
+// #define CABIN_PRESSURE_DC_PIN                  PIN(18)
+// #define CABIN_PRESSURE_MOSI_PIN                PIN(39)
+// #define CABIN_PRESSURE_SCLK_PIN                PIN(40)
+// #define CABIN_PRESSURE_RST_PIN                 -1       // Not connected
+// #define CABIN_PRESSURE_MISO_PIN                -1       // Not connected
+//
+// Example (Brake Pressure gauge):
+// #define BRAKE_PRESSURE_CS_PIN                  PIN(5)
+// #define BRAKE_PRESSURE_DC_PIN                  PIN(7)
+// #define BRAKE_PRESSURE_MOSI_PIN                PIN(10)
+// #define BRAKE_PRESSURE_SCLK_PIN                PIN(11)
+// #define BRAKE_PRESSURE_RST_PIN                 -1
+// #define BRAKE_PRESSURE_MISO_PIN                -1
+//
+// Example (Hydraulic Pressure gauge):
+// #define HYD_PRESSURE_CS_PIN                    PIN(17)
+// #define HYD_PRESSURE_DC_PIN                    PIN(3)
+// #define HYD_PRESSURE_MOSI_PIN                  PIN(4)
+// #define HYD_PRESSURE_SCLK_PIN                  PIN(12)
+// #define HYD_PRESSURE_RST_PIN                   -1
+// #define HYD_PRESSURE_MISO_PIN                  -1
+//
+// Example (Radar Altimeter gauge):
+// #define RADARALT_CS_PIN                        PIN(10)
+// #define RADARALT_DC_PIN                        PIN(11)
+// #define RADARALT_MOSI_PIN                      PIN(13)
+// #define RADARALT_SCLK_PIN                      PIN(14)
+// #define RADARALT_RST_PIN                       -1
+// #define RADARALT_MISO_PIN                      -1
+//
+// Example (Battery gauge):
+// #define BATTERY_CS_PIN                         PIN(36)
+// #define BATTERY_DC_PIN                         PIN(13)
+// #define BATTERY_MOSI_PIN                       PIN(8)
+// #define BATTERY_SCLK_PIN                       PIN(9)
+// #define BATTERY_RST_PIN                        PIN(12)
+
+// --- IFEI LCD Panel Pins ----------------------------------------------------
+// Parallel-interface LCD pairs (left + right) for the IFEI display.
+// #define DATA0_PIN                              PIN(34)  // Left LCD data
+// #define WR0_PIN                                PIN(35)  // Left LCD write enable
+// #define CS0_PIN                                PIN(36)  // Left LCD chip select
+// #define DATA1_PIN                              PIN(18)  // Right LCD data
+// #define WR1_PIN                                PIN(21)  // Right LCD write enable
+// #define CS1_PIN                                PIN(33)  // Right LCD chip select
+
+// --- IFEI Backlight Pins ----------------------------------------------------
+// #define BL_GREEN_PIN                           PIN(1)   // Day mode backlight
+// #define BL_WHITE_PIN                           PIN(2)   // White backlight
+// #define BL_NVG_PIN                             PIN(4)   // NVG mode backlight
+
+// --- ALR-67 Countermeasures Panel -------------------------------------------
+// #define ALR67_STROBE_1                         PIN(16)
+// #define ALR67_STROBE_2                         PIN(17)
+// #define ALR67_STROBE_3                         PIN(21)
+// #define ALR67_STROBE_4                         PIN(37)
+// #define ALR67_DataPin                          PIN(38)
+// #define ALR67_BACKLIGHT_PIN                    PIN(14)
+
+// --- RS485 Communication Pins -----------------------------------------------
+// Only needed for RS485 Slave or Master label sets.
+// #define RS485_TX_PIN                           17       // GPIO for TX (connect to RS485 board DI)
+// #define RS485_RX_PIN                           18       // GPIO for RX (connect to RS485 board RO)
+// #define RS485_DE_PIN                           -1       // GPIO for DE pin (-1 if not used)
+
+// --- RS485 Test Pins (development only, remove for production) --------------
+// All three feed into int8_t fields → use -1 for disabled.
+// #define RS485_TEST_BUTTON_GPIO                 -1
+// #define RS485_TEST_SWITCH_GPIO                 -1
+// #define RS485_TEST_LED_GPIO                    -1