Operation on internal face fails on first attempt after closing sketch

[uhelfenstein]

Problem description

If I close the sketch, select internal face and try to execute an operation it fails with the message "Cannot use selected object. Selected object must belong to the active body". If I select and execute the operation again, it will work as expected.

Workbench affected?

Part Design

Steps to reproduce

1. Create a drawing with a closed shape
2. Close the drawing
3. Select the internal face from the closed shape
4. Activate an operation (e.g. pad)
5. The message "Cannot use selected object. Selected object must belong to the active body" appears
6. Close the message
7. Select the internal face again and repeat the operation -> now it works as expected
8. Open and close the sketch
9. Select the internal face
10. Start the operation -> Error Message.

Expected behavior

Operation on the first attempt without the error message.

Actual behavior

Error Message on the first attempt

260517151628-2277.mp4

Development version About Info (in Safe Mode)

I tried on the latest AstoCAD and FreeCAD with the same behavior. 

OS: Windows 11 build 22631
Architecture: x86_64
Version: 1.1.0dev.20260420 (Git shallow)
Build date: 2026/04/20 16:26:14
Build type: Release
Branch: AstoCAD
Hash: dbb04c744b862e5daa8ffdcccaa2066f971f7077
Python 3.11.15, Qt 6.8.3, Coin 4.0.8, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3
shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1
Locale: German/Switzerland (de_CH)
Stylesheet/Theme/QtStyle: FreeCAD Dark.qss/Dark/
Navigation Style/Orbit Style/Rotation Mode: TinkerCAD/Rounded Arcball/Object center
Logical DPI/Physical DPI/Pixel Ratio: 96/141.585/1
Installed mods:
  * Curves workbench 0.6.70
  * Fasteners Workbench 0.5.51

Last known good version (optional)