Skip to content

About

Tiny, no-telemetry G HUB alternative for the Logitech G Pro X Superlight 2

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Latest commit

 

History

3 Commits

Folders and files

Repository files navigation

Featherweight

Featherweight

A tiny, no-telemetry Windows tool for the Logitech G Pro X Superlight 2 (Lightspeed), as a G HUB alternative.

Warning

Only tested with the PRO X SUPERLIGHT 2 on its Lightspeed receiver (and the wired cable for charging status). Other Logitech mice may partly work but are untested. Use at your own risk: "Save to mouse" writes to the mouse's onboard memory (a backup is made before every write). Not affiliated with or endorsed by Logitech.

Main window   Settings

Tray icon

The tray icon shows the battery level live (it drains from the left and turns red below 15%). Hover it for battery, DPI and polling rate:

Tray icon with tooltip

Features

  • Battery percentage and charging status
  • DPI (with the mouse's real DPI steps) and lift-off distance
  • Polling rate, including 2000, 4000 and 8000 Hz
  • Sleep-after and deep-sleep timers
  • "Save to mouse" stores the settings in the mouse's onboard profile
  • Tray icon with a live battery gauge
  • Start with Windows
  • Light/dark theme and accent colour
  • Tiny footprint: about 3 MB RAM while hidden in the tray, no network access, no background services, no telemetry, no auto-update

Install

  1. Download featherweight.exe from Releases.
  2. Put it anywhere you like and run it.

The exe is unsigned, so Windows SmartScreen may warn. Click More info and then Run anyway. Close G HUB or other Logitech software first, because it can conflict with direct HID++ access.

How it works

The mouse has two kinds of settings:

  • App settings active (host mode) — changes to DPI, polling rate, lift-off and sleep timers are applied live by the app. They are not stored in the mouse and revert when you switch back to the mouse profile.
  • Mouse profile (onboard mode) — the values stored in the mouse's own memory, which the mouse uses on its own.

Save to mouse writes the current values into the mouse's onboard profile. It takes a raw backup of the profile sector before writing and verifies the write byte-for-byte. To go back to the stored profile without saving, use Back to mouse profile.

Restoring a profile backup

Every save writes a timestamped raw backup to a backups folder in the current working directory. If something goes wrong, restore sector 0x0001 with the CLI:

gpx-tool.exe restore-sector backups\profile-YYYYMMDD-HHMMSS-sector0001.bin --yes

gpx-tool.exe profile-dump makes a read-only dump of all profile sectors.

Command-line tool

gpx-tool.exe is built next to the GUI and provides these commands:

  • status, ranges, rate, devices, features, feature-info, battery-watch — read-only device information.
  • set-dpi <dpi>, set-rate <hz>, set-lod <1|2|3>, onboard — apply settings live in host mode, or return to the mouse's onboard profile (no onboard write).
  • sleep-timers — read the sleep and deep-sleep timers from the onboard profile.
  • profile-dump — read-only dump of all profile sectors to backups.
  • save-to-mouse [<dpi>] [--dpi N] [--lod 1|2|3] [--rate HZ] [--sleep SECONDS] [--deep-sleep SECONDS] --yes (alias save-dpi) — writes to the mouse's onboard profile; a timestamped backup is made first.
  • restore-sector <file> --yes — writes a raw sector backup back to the mouse.

Building from source

Requirements:

  • rustup with the stable MSVC toolchain
  • Visual Studio Build Tools with the "Desktop development with C++" workload
  • Windows 11 (the code targets x86_64-pc-windows-msvc)
cargo build --release

The executables are written to:

  • target\release\featherweight.exe — the GUI/tray app
  • target\release\gpx-tool.exe — the command-line tool

How this was made

Featherweight was built as an AI-assisted project:

  • Ad1FPS (project author) - idea, creative direction, design decisions, and all testing on real hardware.
  • Claude (Anthropic; Sonnet 5.5 and Opus 5.5) - planning, HID++ protocol research, session prompts, reviewing results, and the banner/icon design.
  • DeepSeek V4.1 Flash (via OpenCode) - wrote the Rust code.

Every feature was verified on a real PRO X SUPERLIGHT 2, but the code has not been reviewed line-by-line by an experienced Rust developer. Bug reports and pull requests are welcome.

Credits

The HID++ protocol documentation and research from Solaar and libratbag, plus the public OpenLogi documentation, made this project possible.

Licence

MIT. See LICENSE.

About

Tiny, no-telemetry G HUB alternative for the Logitech G Pro X Superlight 2

Topics

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages