bmp5xx

True-to-spec async I2C driver for the BMP580/BMP581/BMP585 barometric pressure sensors.

• no_std compatible, works without an allocator
• Widely compatible, generic over [embedded_hal_async] I2C traits
• 100% documentation coverage
• Based on Bosch Sensortec BMP581 datasheet, written by a human
• Fully tested on real hardware: compatible with Adafruit BMP580 and Adafruit BMP581 development boards
• Working examples in the repository

Features

• Normal, forced, and continuous mode measurements
• Configurable interrupts
• Out-of-range configuration
• Oversampling, IIR filtering

Usage

Getting started is easy:

// initialize the sensor
let mut bmp5 = Bmp5xx::new(i2c, Delay, 0x47);
bmp5.init().await.unwrap();

// new pressure measurement
let pressure = bmp5.meas_pres().await.unwrap();

Advanced operations:

// change oversampling rate
bmp5.osr_temp(Oversampling::X8);
bmp5.osr_pres(Oversampling::X128);

// set up interrupts
bmp5.int(Interrupt::default().enable(true)).await.unwrap();

// start continuous measurement
bmp5.start_continuous(true).await.unwrap();

Demo

If you don't have hardware to try it, check out the demo video: https://youtu.be/RD1FmZXssCE

License: GPL-3.0-or-later