Writing to the alarm

[gnalbandian]

Hello.
Good work!

Just a simple question.
Would this library allow us t owrite to the panel, or just to decode it?
Thanks, regards.

[stagf15]

This library will eventually allow writing to the panel, but it does not currently. I will be picking up work on this library again in about 3 weeks. Until then I have to work on some other stuff. Thanks for your interest in it!

[rogueturnip]

stagf15 is doing a great job on this! I'm hoping in the next few weeks to get the components needed to connect the write portion to the keybus and then we can figure this out.

If you are implement this one thing that would really help out the development is looking at the messaging on the keybus and see if any new commands or instructions could be discovered.

[gnalbandian]

Hi folks

Have you made any progress with this? May I help somehow.
Thanks.

[rogueturnip]

Hi!
I haven't had much time so far this month to work on the code for writing. I did get a circuit that will work set up. If you order this part from sparkfun (https://www.sparkfun.com/products/12009) you can set up the read and write circuits pretty easy.

If you have this set up feel free to help out with enhancing the code for writing.

[andrew867]

@rogueturnip Do you have a circuit diagram or description of how you implemented the voltage dividers/lever converter for read/write?

[pastelka]

Hi, good job.

Could you send me how I can connect Arduino to DSC for read/write operation. In your code is "Keybus Green Output (Data Line through driver)" but I don't know what it means.

Regards

[MagnusPer]

This project has implemented write operation support, also much more stable.
https://github.com/taligentx/dscKeybusInterface

[shayagmon]

Thank you. Looks very impressive. I am going to resume some work on this shortly and your email came just in time. Much appreciated ! Best regards, Shay

…

On Tue, May 22, 2018 at 2:33 PM, Magnus ***@***.***> wrote: This project has implemented write option https://github.com/taligentx/dscKeybusInterface — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#3 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ASdFCxEv-7znsFGZ-_BHQ0UaeC4233Gcks5t1FnqgaJpZM4KjmWW> .