USB Audio & MIDI causing a conflict

[mweetman2]

Thanks so much for your code.
I am seeing the same issue as in the link below.
hathach/tinyusb#3382
Currently, I can enumerate EITHER audio or MIDI, but not both at the same time.
I have tried unsuccessfully to integrate the PR from the above link into my code. My bad...
Any help appreciated.
Thanks

[mweetman2]

Figured this out.
The problem was that with both MIDI & Audio (& Serial), the configuration descriptor became longer than the default setting.
Just increasing the length of the configuration buffer solved the issue.
Thanks again for such useful code...