Require assistance

[PJCzx]

Hi guys,

Sorry to bother but I'm quite a noob in most of the subjects here and I'm a bit lost. I'm trying to replicate the signal of the remote control for projection screen.

I tried many lib, but only RFControl look to give me feedback.

b: 612 244 144 5204 0 0 0 0 
t: 001200120202001012020012020010101012001010101200120012020202001012020202020201001202010202020202020200120200120202001201001012010013

I understand the pulse lengths are [144, 244, 612, 5204](not exactly doubled each times :s). The pulse count is 132 and the pulse sequence is written above.

The protocols with a pulse count of 132 are:

• contact1.js [268, 1282, 2632, 10168]
• pir5 [268, 1282, 2632, 10168]
• switch1.js [268, 1282, 2632, 10168]
• switch17.js [260, 2680, 1275, 10550]

None of those have a close pulse length.

I'd like hints to:

1. Identify the next steps
2. Get a few instruction on which file to edit, where and how to run tests with gulp (not very familliar)

I opened a Stackoverflow without answer since weeks, I'm now trying to contact any of you.

Thank you in advance, once again sorry to rise an issue for that.

Best,
PJ

[mwittig]

Hi, in which context are you planning to use RFControlJS? Are you using pimatic? If yes it might be helpful to trace debug messages which can be produced by pimatic-homeduino on request by setting the "debug" property as part of the plugin configuration.

[PJCzx]

Hello @mwittig,

I've been through the tutorial as far as you mentioned; I'm now getting:

[pimatic-homeduino] data: "ready"
[pimatic-homeduino] Connected to homeduino device.
[pimatic-homeduino] data: "PING"
[pimatic-homeduino] data: "ACK"
[pimatic-homeduino] Receiving on pin 0 //Plugged ATAD on D2

Press UP

[pimatic-homeduino] data: "RF receive 600 196 5224 0 0 0 0 0 001100110101001011010011010010101011001010101100110011010101001011010101010101001101010101010101010100110100110101001101001011010012"
[pimatic-homeduino] received: [ 196, 600, 5224 ] 110011001010110100101100101101010100110101010011001100101010110100101010101010110010101010101010101011001011001010110010110100101102

Press DOWN

[pimatic-homeduino] data: "RF receive 600 196 5232 0 0 0 0 0 001100110101001011010011010010101011001010101100110011010101001011010101010101001101010101010101010101010011001011010010110100101012"
[pimatic-homeduino] received: [ 196, 600, 5232 ] 110011001010110100101100101101010100110101010011001100101010110100101010101010110010101010101010101010101100110100101101001011010102

Press STOP

[pimatic-homeduino] data: "RF receive 600 196 5228 0 0 0 0 0 001100110101001011010011010010101011001010101100110011010101001011010101010101001101010101010101010100110101001011001101001100101012"
[pimatic-homeduino] received: [ 196, 600, 5228 ] 110011001010110100101100101101010100110101010011001100101010110100101010101010110010101010101010101011001010110100110010110011010102

I'm following the read me but my understanding is blocked at the binary. So far, I'm able to identify something like a long common code + specific to action + footer but I don't know how to define the pulsesToBinaryMapping

11001100101011010010110010110101010011010101001100110010101011010010101010101011001010101010101010101 01011001101001011010010110101 02 //UP
11001100101011010010110010110101010011010101001100110010101011010010101010101011001010101010101010101 10010110010101100101101001011 02 //DOWN
11001100101011010010110010110101010011010101001100110010101011010010101010101011001010101010101010101 10010101101001100101100110101 02 //STOP

Can anyone help me?
Thx

[PJCzx]

Idem, I don't know how to define binaryToPulse. Does anyone have good documentation on this?