Problem with Away Mode, presence detection & Night Eco Mode

[Waechter1984]

Hello,

First of all, thank you very much for the great blueprint.

However, I'm having a problem with Away Mode.

I have a room where I'd like to use Away Mode. A motion detector is configured there. It's set to only react to movement during the day. At night, the Eco temperature should apply.

During the day, the temperature should be 19°C in Away Mode, and when movement is detected, it should be set to 21°C (Comfort).

Unfortunately, at night the temperature remains at 19°C in Away Mode and doesn't switch to Eco.

I've selected Presence Away Mode for this.

According to the documentation, the behavior should be:

Detected home off Eco and

Not Detected home off Eco

When you are away (not at home), the device switches to ECO mode.

Unfortunately, Away Mode is active in both cases.

Am I doing something wrong?

Thanks and best regards, Tim

[Waechter1984]

Nach einigen versuchen kann ich folgendes Verhalten feststellen.

Presence Away Mode: Person abwesend, presence schedule An + presence nicht erkannt = Away Mode an ( sollte laut Beschreibung aber bei Abwesenheit Aus sein?)

Was mache ich falsch ?

[Waechter1984]

Ich habe den Fehler scheinbar gefunden:

is_away:
"{% if is_person_defined and not is_anybody_home_or_proximity %}\n {{
(is_scheduler_away_mode and state_scheduler) or (is_presence_away_mode and state_presence_scheduler and not state_presence)
}}\n

nach meiner Ansicht steht hier wenn niemand zuhause ist und der presence Scheduler an aber keine Anwesenheit erkannt wurde schalte in den away Modus. Das wieder spricht m.E. dieser aussauge.

{% elif presence_ignor_people and is_presence_away_mode
%}\n {{ state_presence_scheduler and not state_presence }}\n{%

elif is_presence_away_mode and is_person_defined and is_anybody_home_or_proximity and not presence_ignor_people
%}\n {{ not state_presenc**e }}\n{% else %}\n {{ false }}\n{% endif %}\n"

Auch hier steht wenn ich es richtig verstehe " wenn presence_away_mode ist, eine person definiert und jemand zuhause aber nicht presence_ignor_people und der keine Anwesenheit erkannt ist. schalte in den away Modus. Dann fehlt hier aber das kommentar zum state_presence_scheduler.

Ich habe den Code folgendermaßen für mich abgeändert:

is_away: "{% if is_person_defined and not is_anybody_home_or_proximity %}\n {{
(is_scheduler_away_mode and state_scheduler) }}\n{% elif presence_ignor_people and is_presence_away_mode
%}\n {{ state_presence_scheduler and not state_presence }}\n{% elif is_presence_away_mode
and is_person_defined and is_anybody_home_or_proximity and not presence_ignor_people
%}\n {{ state_presence_scheduler and not state_presence and not state_scheduler }}\n{% else %}\n {{ false }}\n{% endif %}\n"

Funktioniert für mich ganz gut.