So i know how to spoof this ssd (Fanxiang S500 pro 1tb + map1202) and that being the SMART serial number only yk that mainly shows up in CrystalDiskInfo (yes it changes along with the firmware number and passes just fine and i see the new smart serial afterwards), but on the other hand the wmic serial or eui64 whatever you may call it looks like "0000_0000_0000_0000_23DC_3124_AF21_2019" exact length and format even the 0s but some different numbers ofcourse, anyways you would see that serial by doing this command "wmic diskdrive get model,serialnumber" in powershell or most hwid checkers show this for your disk serial so what i want to know is how would i change this? Even after changing the smart serial which is something else entirely, the wmic doesnt "clear or reset" and yes i reinstalled windows after and all the other cmds arent relevant because the smart serial, model and firmware changed and i reinstall right after. ive been spoofing it for like 4 months and the wmic has never changed, i have multiple friends that have the same issue, i know it actually does work on 1602 confirmed but not the 1202 it seems, even the Sm2263xt controller lets you change everything else including the wmic confirmed as well so im wondering why this is being promoted for this ssd spoofing when it seems to not be able to change the wmic over the other 2, idk if you properly tested it yourself or not but any help if it can? I also found out that you can force the tool to show the "eui64 field" if you go into MPTOOL.ini and set "ToolModeSetting=2" to "ToolModeSetting=3" then save and reopen it but when you try to edit it then you get errors, any ideas?
So i know how to spoof this ssd (Fanxiang S500 pro 1tb + map1202) and that being the SMART serial number only yk that mainly shows up in CrystalDiskInfo (yes it changes along with the firmware number and passes just fine and i see the new smart serial afterwards), but on the other hand the wmic serial or eui64 whatever you may call it looks like "0000_0000_0000_0000_23DC_3124_AF21_2019" exact length and format even the 0s but some different numbers ofcourse, anyways you would see that serial by doing this command "wmic diskdrive get model,serialnumber" in powershell or most hwid checkers show this for your disk serial so what i want to know is how would i change this? Even after changing the smart serial which is something else entirely, the wmic doesnt "clear or reset" and yes i reinstalled windows after and all the other cmds arent relevant because the smart serial, model and firmware changed and i reinstall right after. ive been spoofing it for like 4 months and the wmic has never changed, i have multiple friends that have the same issue, i know it actually does work on 1602 confirmed but not the 1202 it seems, even the Sm2263xt controller lets you change everything else including the wmic confirmed as well so im wondering why this is being promoted for this ssd spoofing when it seems to not be able to change the wmic over the other 2, idk if you properly tested it yourself or not but any help if it can? I also found out that you can force the tool to show the "eui64 field" if you go into MPTOOL.ini and set "ToolModeSetting=2" to "ToolModeSetting=3" then save and reopen it but when you try to edit it then you get errors, any ideas?