diff --git a/device/dipper/BRINGUP-M1.md b/device/dipper/BRINGUP-M1.md index 4486a4c80..e75f315c3 100644 --- a/device/dipper/BRINGUP-M1.md +++ b/device/dipper/BRINGUP-M1.md @@ -1,12 +1,12 @@ # Xiaomi Mi 8 (dipper): RAM-only first light -**Status (2026-11-10):** the combined #503/#505 non-NFS image `540b5d31ea73a31ade9a8d8cb5152cf701dc3c2ad8256734790b0ef2db6dbdd0` booted by RAM on the Xiaomi Mi 8 with kernel/DTS PR #220 at `055a4019998f22cc0e2a8afef7650274a6ce0657`. Its initramfs root had all 85 UFS partition flags at `ro=1`. `/sys/block/sda/ro` was `0`, but `/dev/sda` was absent; `sdb`–`sdf` were `ro=1`. The guard confirmed this state. `qcom_wdt` and its feeder ran, simpledrm registered `fb0`, USB/SSH worked, and `/proc/iomem` reserved `0x85fc0000–0x8a8fffff`, covering the former TZ range. The pinned rescue SSH key matched, and `reboot-to` returned the phone to fastboot. Physical input events were not captured on this exact image. +**Status (2026-11-11):** the newest RAM boot is the 2026-11-11 one in [NOTES.md]: #505's rebuilt image `665fcbd682cd8e64b3ffec1ff7f4ab9ca33a26b9b47b11073be7a3c267abf2b1` on kernel/DTS #220's final head, with every UFS partition read-only. Before it, on 2026-11-10, the combined #503/#505 non-NFS image `540b5d31ea73a31ade9a8d8cb5152cf701dc3c2ad8256734790b0ef2db6dbdd0` booted by RAM on the Xiaomi Mi 8 with kernel/DTS PR #220 at `055a4019998f22cc0e2a8afef7650274a6ce0657`. Its initramfs root had all 85 UFS partition flags at `ro=1`. `/sys/block/sda/ro` was `0`, but `/dev/sda` was absent; `sdb`–`sdf` were `ro=1`. The guard confirmed this state. `qcom_wdt` and its feeder ran, simpledrm registered `fb0`, USB/SSH worked, and `/proc/iomem` reserved `0x85fc0000–0x8a8fffff`, covering the former TZ range. The pinned rescue SSH key matched, and `reboot-to` returned the phone to fastboot. Physical input events were not captured on this exact image. A separate RAM NFS-root run used image `a2d435a7430e7e4c145c61cdb9866d16929731859d91c7105e6bfcaf9e3e9dd7` with the rebased #503 init. BusyBox `mount` switched to the test NFS root; all six disk flags and all 85 partition flags were `ro=1`. Systemd reached the multi-user target with `RuntimeWatchdogSec=60s`, and SSH remained available. `reboot-to bootloader` returned the phone to fastboot. The exported root was a generic Arch base; this did not test the Omarchy desktop or link-loss recovery. Full results are in [NOTES.md]. The FTS5 driver from [touch #219] is merged into linux-omarchy-mobile. The -Dipper board DTS is under review in [DTS #220], and the EA8074 panel driver is -under review in [panel #218]. +Dipper board DTS from [DTS #220] is merged too (2026-11-11), and the EA8074 +panel driver is under review in [panel #218]. The EA8074 panel test is recorded in [NOTES.md]. The FTS5 touchscreen still needs a hardware test. On 2026-11-09, a guarded RAM boot was used to capture all 84 GPT partitions @@ -131,3 +131,4 @@ running image to fastboot on 2026-11-09 without writing UFS. [panel #218]: https://github.com/derekross/linux-omarchy-mobile/pull/218 [touch #219]: https://github.com/derekross/linux-omarchy-mobile/pull/219 [DTS #220]: https://github.com/derekross/linux-omarchy-mobile/pull/220 +[NOTES.md]: NOTES.md diff --git a/docs/DEVICES.md b/docs/DEVICES.md index f781678ce..d86318487 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -27,7 +27,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Pixel 4 XL ([notes](../device/coral/NOTES.md)) | coral | SM8150 (Snapdragon 855) | WIP (direct ABL v2 boot on the test handset's slot A; slot-B install and §3.1 entry pending; [notes](../device/coral/BRINGUP-M1.md)) | testing (read-only `blockdev` guard + RAM `overlayfs`) | testing (1440x3040@60Hz S6E3HC2 DSC 1.1 KMS, DPMS, brightness) | testing (Adreno 640 / FD640 Mesa Freedreno, Hyprland) | testing (FTS SPI multitouch + read-only flash guard) | testing (power via `qcom-pon` + volume via `gpio-keys`) | testing (CDC ECM + ACM + SSH; stays up with host USB switched off) | testing (`WCN3990` `ath10k_snoc` + `rmtfs -r`, WPA2/DHCP/HTTPS; radio sessions ran before the modem baseline) | WIP (`WCN3990` `hci_qca` `hci0` up + BLE scan; audio/pairing open) | WIP (PM8150B ADC `VBAT_SNS` voltage + FG temp; aftermarket pack on test unit: no reply from `1-0036`) | testing (PM8150B SMB5 charger with `4.20 V` / `500 mA` kernel clamp) | testing (`CS40L25A` I2C click waveform) | testing (PM8150L flash LEDs + quick-settings tile) | no | - | testing (QDSP6 + dual `CS35L36` amps capped at `-26 dB` + `IA8508` SPI mic DSP) | testing (`SLPI` + `fastrpc` + RAM-backed `hexagonrpcd` + QMI SSC: 7 sensors + Soli radar) | WIP (`MPSS` boots with `rmtfs -r` + patched `tqftpserv`, SIM detected; no IPA/voice yet; radio sessions ran before the modem baseline) | no | testing (`CAMSS` + `IMX363`, `IMX481`, `IMX520`, dual `OV7251` NIR; `libcamera` softISP) | no | - | | Pixel 9a ([notes](../device/tegu/NOTES.md)) | tegu | zumapro (Tensor G4) | works ([#28](https://github.com/derekross/omarchy-mobile/issues/28): native boot from slot B, the Arch root on `userdata`, `omamobile-device-tegu`; slot B was marked successful by hand on 2026-10-28 with the `devinfo` write approved on 2026-10-22, now on hold ([#125](https://github.com/derekross/omarchy-mobile/pull/125)), unmarked by the 10-31 fastboot recovery and marked again on 2026-10-31 during the hold ([record](../device/tegu/NOTES.md#2026-10-31-a-fastboot-flash-of-slot-b-cleared-its-successful-mark-and-b-was-marked-again)), and the package does not mark it; unpublished kernel: the SoC and board device tree is [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (UFS behind the read-only guard; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (120 Hz through gs-decon; the panel driver [kernel #89](https://github.com/derekross/linux-omarchy-mobile/pull/89), 120 Hz [kernel #88](https://github.com/derekross/linux-omarchy-mobile/pull/88), merged, the display DT, merged with [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96); brightness, DPMS off and on and the 60/120 Hz switch on the boot of [kernel #125](https://github.com/derekross/linux-omarchy-mobile/pull/125), merged, which also checks the panel's ID; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on), [brightness record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) | works (Panthor, the desktop renders, runtime suspend when idle; this boot runs at a fixed 160 MHz; the GPU's levels and its thermal zone are merged with [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) ([kernel #85](https://github.com/derekross/linux-omarchy-mobile/pull/85) and [kernel #87](https://github.com/derekross/linux-omarchy-mobile/pull/87) landed through it), not yet run from it; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Synaptics S3908 over SPI, [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; survives sleep, [kernel #82](https://github.com/derekross/linux-omarchy-mobile/pull/82), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (gpio-keys: power and volume; the power key wakes from sleep; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CDC NCM and SSH; reconnects after a replug, `omamobile-tegu-usb-rescue`, also after a replug the gadget didn't see ([#280](https://github.com/derekross/omarchy-mobile/pull/280); [the replug record](../device/tegu/NOTES.md#2026-10-28-what-the-device-tables-claims-rest-on)); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (BCM4383 on PCIe channel 1 through the shared gs201 host and zuma PHY, [kernel #178](https://github.com/derekross/linux-omarchy-mobile/pull/178) on [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156), in review, and brcmfmac, [kernel #56](https://github.com/derekross/linux-omarchy-mobile/pull/56) in review; started at boot by `omamobile-device-tegu` 0.2.4 ([#238](https://github.com/derekross/omarchy-mobile/pull/238)) with the extractor's firmware; WPA2 with iwd, kept loaded across sleep by the package's sleep hook; [record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) | works (hci_uart on the bootloader's address, BlueZ, A2DP; [kernel #94](https://github.com/derekross/linux-omarchy-mobile/pull/94); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (MAX77779 gauge with temperature, current and time estimates through UPower; [kernel #66](https://github.com/derekross/linux-omarchy-mobile/pull/66); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (the MAX77779 charger binds from the device tree, [kernel #161](https://github.com/derekross/linux-omarchy-mobile/pull/161), merged, built by [#227](https://github.com/derekross/omarchy-mobile/pull/227); the charge limit in `omamobile-device-tegu` 0.2.3 holds charging off at the limit through `charge_behaviour` and lets it run again 5 below; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (CS40L26A through feedbackd, with brownout prevention, [kernel #95](https://github.com/derekross/linux-omarchy-mobile/pull/95); its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (LM3644, 25 steps to 75 mA, quick-settings tile; its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (Omarchy's Location switch serves fixes from GPS, Galileo, BeiDou and GLONASS through the modem's Kepler once the modem is up; `omamobile-device-tegu`'s boot unit, opt-in ([#372](https://github.com/derekross/omarchy-mobile/pull/372)), starts gnssd with the modem: on 2026-11-03, after a reboot with nothing started by hand, a session through the switch's socket had 133 of 135 GGA sentences fixed, first fix 48 s after the client connected, 18 satellites; on 2026-11-09 the same from the in-tree drivers (the GNSS link driver, [kernel #185](https://github.com/derekross/linux-omarchy-mobile/pull/185), and the 9a's GNSS nodes, [kernel #237](https://github.com/derekross/linux-omarchy-mobile/pull/237), the `modem-cpif` overlay with the driver's config line, [#594](https://github.com/derekross/omarchy-mobile/pull/594), and the PCIe PHY's config line, [#274](https://github.com/derekross/omarchy-mobile/pull/274), all merged): four 150 s sessions, 497 of 507 GGA sentences fixed, up to 24 satellites; a 30-minute session on 2026-11-01 (omamobile-gnss 0.2.5's start, by hand, the modem link left to cycle) had 1763 of 1765, first fix 37 s, and a session in a moving car from [#114](https://github.com/derekross/omarchy-mobile/pull/114)'s package build fixed 145 of 153 times; needs [kernel #150](https://github.com/derekross/linux-omarchy-mobile/pull/150) and the PERIC0 clock fix [kernel #172](https://github.com/derekross/linux-omarchy-mobile/pull/172), both merged (without the latter the modem link hung the palmtop within minutes); not on by default because the modem isn't (the Modem cell); [plan](../device/tegu/MODEM-PLAN.md), [record](../device/tegu/TELEPHONY-PLAN.md), record with [#202](https://github.com/derekross/omarchy-mobile/pull/202)) | works (audio and sensor DSP through the GSA and Trusty, 93 services, started at boot by `omamobile-device-tegu` 0.2.3 from the device tree, [kernel #162](https://github.com/derekross/linux-omarchy-mobile/pull/162) in review; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (the TAS2572 amplifiers and the microphone through the AoC card and PipeWire, at boot with the AoC: a tone from the speaker, the microphone at -32 dBFS; speakers at a -10 dB ceiling; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (accelerometer, light, proximity, compass and gyroscope through the AoC and the sensor proxy, at boot with the AoC; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | testing (calls in and out on the speakerphone, texts both ways, mobile data over the device `omamobile-sit-data` finds, with the Phone and Messages apps on the bridge ([#356](https://github.com/derekross/omarchy-mobile/pull/356), [#364](https://github.com/derekross/omarchy-mobile/pull/364), [#367](https://github.com/derekross/omarchy-mobile/pull/367), [#371](https://github.com/derekross/omarchy-mobile/pull/371)); `omamobile-device-tegu`'s boot unit starts the modem, the phone service and the bridge at boot when the owner enables it ([#372](https://github.com/derekross/omarchy-mobile/pull/372)), and is skipped on a phone that isn't provisioned or has no CP drivers; opt-in, not on by default, while marking slot B on the 9a is on hold ([#483](https://github.com/derekross/omarchy-mobile/pull/483)): with B unmarked a reset spends one of ABL's three tries, and the unit can't tell; it ran by itself on the owner's palmtop over a day of reboots on 2026-11-09 with 42 of 43 stops confirmed, one unexplained ([record](../device/tegu/TELEPHONY-PLAN.md#29-the-in-tree-drivers-through-the-starter-on-the-published-tip-plus-four-open-changes-2026-11-09)), and the NV partitions unchanged, on the owner's kernel with the bring-up modules, and on the in-tree drivers ([kernel #187](https://github.com/derekross/linux-omarchy-mobile/pull/187) and [kernel #162](https://github.com/derekross/linux-omarchy-mobile/pull/162), merged), which need the `modem-cpif` overlay and the GNSS link driver's config line ([#594](https://github.com/derekross/omarchy-mobile/pull/594)) and the PCIe PHY's config line ([#274](https://github.com/derekross/omarchy-mobile/pull/274)), all merged; the far end still hears an echo on the speakerphone ([#378](https://github.com/derekross/omarchy-mobile/pull/378)) and there's no earpiece route yet; [plan](../device/tegu/MODEM-PLAN.md), [record](../device/tegu/MODEM-PLAN.md#sim-test-results-2026-11-02-730-rc6-omamobile-tegu-s2mpg15-m1-g991042e2eff3-dirty)) | works (NXP ST54L through nxp-nci, its clock pad from the PMU ([kernel #104](https://github.com/derekross/linux-omarchy-mobile/pull/104) and [kernel #105](https://github.com/derekross/linux-omarchy-mobile/pull/105), merged, with [kernel #131](https://github.com/derekross/linux-omarchy-mobile/pull/131), merged), loaded at boot by `omamobile-device-tegu` 0.2.3 with neard and the link opener: polls with no I2C errors and read a payment card; polling stops before sleep; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (main, ultrawide and front from the device tree, [kernel #164](https://github.com/derekross/linux-omarchy-mobile/pull/164) in review, with [kernel #63](https://github.com/derekross/linux-omarchy-mobile/pull/63) and [kernel #103](https://github.com/derekross/linux-omarchy-mobile/pull/103) in review: their drivers load at boot with nothing by hand, libcamera lists all three, and each streams, main at 19 fps and the others at 30 fps at 1280x960; basic picture quality through libcamera's software ISP; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel); the main camera's contrast autofocus through its LC898129 ([kernel #213](https://github.com/derekross/linux-omarchy-mobile/pull/213) in review, and a lens node on top of kernel #164, not yet in a pull request; libcamera 0.7.2-4.23), close subjects checked, the far end not yet ([notes](../device/tegu/NOTES.md#2026-11-07-the-main-cameras-autofocus-lc898129))) | testing (s2idle when asked for, or through the shell's auto-sleep with the `omamobile-sleep` toggle on, which ships off; the power key lights the lock screen on the first press ([#268](https://github.com/derekross/omarchy-mobile/pull/268), [#275](https://github.com/derekross/omarchy-mobile/pull/275)), and the RTC wakes it; on 2026-11-01 thirty attended 120 s sleeps ([plan](../device/tegu/SLEEP-PLAN.md) S1) and a day of real use with auto-sleep on ([record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) all woke, but six test sleeps since 10-28 did not (one in 21 on the clock-fix kernel on 11-01, and one in 127 in an overnight series of 120 s sleeps on 11-01 to 11-02), so sleep tests stay attended ([plan](../device/tegu/SLEEP-PLAN.md) S1); two causes are known: dead storage after a wake (the UFS pads came back as plain inputs on about one wake in a hundred; [kernel #224](https://github.com/derekross/linux-omarchy-mobile/pull/224), in review, re-applies the pin state at resume), and a silent no-wake with C2 entered through s2idle's own path: with C2 disabled for the sleep (#96) or left to the ordinary idle path (#98) the RTC alarm woke the palmtop 300 of 300 times each, then 15 of 15 on the everyday path, twelve of them half-hour auto-sleeps (2026-11-07 and 11-08, [#409](https://github.com/derekross/omarchy-mobile/pull/409)); [#591](https://github.com/derekross/omarchy-mobile/pull/591) is the sleep hook for it; open: on the published kernel, which has no idle states, a sleep still fails to wake now and then: one in 22 on 2026-11-09 (a boot without modules), none in two re-runs of 36, and one in 213 overnight on 2026-11-10 on the newest tip with the fixes, where the console shows the kernel alive and CPU 7 not answering from just after the device suspend ([plan](../device/tegu/SLEEP-PLAN.md) S1, failure 3); the RTC alarm on the published kernel came with [kernel #236](https://github.com/derekross/linux-omarchy-mobile/pull/236), merged 2026-11-10 (a kernel from before it has none, and a sleep there ends only on a key); works once that no-wake is found and fixed and kernel #224 is merged and has run from the published kernel; the drain is about 300 mA asleep, the same as awake with the screen off, because nothing below the CPUs sleeps yet; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (opt-in) (enrolls, matches, refuses other fingers and unlocks the lock screen through Trusty and `omamobile-fingerprint`, 2026-10-29; the sensor binds from the device tree, [kernel #165](https://github.com/derekross/linux-omarchy-mobile/pull/165) in review, with [kernel #126](https://github.com/derekross/linux-omarchy-mobile/pull/126), merged; opt-in as on the 7 Pro, because the service's first run writes Trusty's secure storage; [plan](../device/tegu/FINGERPRINT-PLAN.md), [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | | Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B; from 2026-11-01 to 2026-11-07 a local unit marked slot B on Lef's phone; stopped pending [#252](https://github.com/derekross/omarchy-mobile/issues/252); Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer with the panel's size, [kernel #154](https://github.com/derekross/linux-omarchy-mobile/pull/154): console and Omarchy's lock screen; 120 Hz with brightness on a test kernel, [kernel #160](https://github.com/derekross/linux-omarchy-mobile/pull/160), started by the device package, [#228](https://github.com/derekross/omarchy-mobile/pull/228)) | testing (panthor on the Mali-G715 on a test kernel, [kernel #157](https://github.com/derekross/linux-omarchy-mobile/pull/157); [ROADMAP](../device/husky/ROADMAP.md)) | works (ST FTM5 over SPI, merged, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-31-the-touchscreen)) | works (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-30-the-buttons)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | testing (BCM4398D0 on the APM UART, pairing and A2DP, on a test kernel, [kernel #199](https://github.com/derekross/linux-omarchy-mobile/pull/199); firmware from the owner's image; [ROADMAP](../device/husky/ROADMAP.md)) | testing (gauge with Google's ATL model through a bring-up overlay, temperature, MFD, pack EEPROM, [kernel #163](https://github.com/derekross/linux-omarchy-mobile/pull/163) and [#175](https://github.com/derekross/linux-omarchy-mobile/pull/175); the bus on by default waits for [kernel #205](https://github.com/derekross/linux-omarchy-mobile/pull/205); [notes](../device/husky/BATTERY-NOTES.md)) | testing (the charger driver and `tcpci_maxim` as a sink, by hand under a dead-man tool: sink at the Type-C 3 A level (input limit 0xc2 0x13 to 0x77); +1.5 A measured from a 30 W charger without the driver (1.485 A is the device-tree cap); no host mode, [#282](https://github.com/derekross/omarchy-mobile/pull/282); [notes](../device/husky/BATTERY-NOTES.md), [#1](https://github.com/derekross/omarchy-mobile/issues/1#issuecomment-6562547503)) | testing (CS40L26 on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | testing (LM3644, 50 mA cap, on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | no (first steps as drafts: [kernel #210](https://github.com/derekross/linux-omarchy-mobile/pull/210), [#211](https://github.com/derekross/linux-omarchy-mobile/pull/211)) | testing (loads and runs through the GSA and Trusty on a test kernel; plan and results [AOC-PLAN](../device/husky/AOC-PLAN.md)) | testing (stereo speakers and one microphone through UCM2 and PipeWire on a test kernel, [kernel #203](https://github.com/derekross/linux-omarchy-mobile/pull/203), [#204](https://github.com/derekross/linux-omarchy-mobile/pull/204), package [#453](https://github.com/derekross/omarchy-mobile/pull/453)) | no | no | testing (a test kernel reads tags; [kernel #208](https://github.com/derekross/linux-omarchy-mobile/pull/208), [#209](https://github.com/derekross/linux-omarchy-mobile/pull/209)) | no | no | no | -| Pixel 8a ([notes](../device/akita/NOTES.md)) | akita | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B into the initramfs with USB and SSH, no Arch root yet; `reboot-to bootloader` reaches fastboot; the first-light board file is merged, [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [BRINGUP-M1](../device/akita/BRINGUP-M1.md), [notes](../device/akita/NOTES.md#2026-11-03-first-light-m13-and-the-console-m14)) | WIP (UFS at HS-G4 behind the read-only guard, from the initramfs only, nothing run on `userdata`; merged, [kernel #206](https://github.com/derekross/linux-omarchy-mobile/pull/206); the device package and storage plan are in review, [#456](https://github.com/derekross/omarchy-mobile/pull/456)) | WIP (simple-framebuffer: the boot console over Omarchy's splash; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [notes](../device/akita/NOTES.md#2026-11-03-first-light-m13-and-the-console-m14)) | no | no | no | testing (USB and SSH from the initramfs; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | +| Pixel 8a ([notes](../device/akita/NOTES.md)) | akita | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B boots Omarchy's root image from `userdata` with the session and the lock, and a second boot comes up clean, [BRINGUP-M2](../device/akita/BRINGUP-M2.md) gate (e), 2026-11-10; `reboot-to bootloader` reaches fastboot; the first-light board file is merged, [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [BRINGUP-M1](../device/akita/BRINGUP-M1.md)) | testing (UFS at HS-G4 behind the storage guard, Omarchy's image on `userdata`; merged, [kernel #206](https://github.com/derekross/linux-omarchy-mobile/pull/206) and the device package and storage plan, [#456](https://github.com/derekross/omarchy-mobile/pull/456)) | WIP (simple-framebuffer: the boot console over Omarchy's splash; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [notes](../device/akita/NOTES.md#2026-11-03-first-light-m13-and-the-console-m14)) | no | testing (the GT9895 touchscreen: the PIN pad unlocks by touch, and the shell and on-screen keyboard work by hand, [BRINGUP-M3](../device/akita/BRINGUP-M3.md) gate (g), 2026-11-11; merged, [kernel #241](https://github.com/derekross/linux-omarchy-mobile/pull/241)) | testing (Power wakes and locks, volume keys; [BRINGUP-M3](../device/akita/BRINGUP-M3.md) gate (f); merged, [kernel #238](https://github.com/derekross/linux-omarchy-mobile/pull/238)) | testing (USB and SSH from the initramfs; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; `boot` and `init_boot` carry AVB footers, which a phone whose `vbmeta_b` is stock's needs to start slot B (device-panther 0.1.6, [#396](https://github.com/derekross/omarchy-mobile/pull/396), [notes](../device/panther/NOTES.md#2026-11-02-avb-footers-on-boot-and-init_boot)); `reboot-to bootloader` reaches fastboot with `reboot=warm`, merged, [kernel #198](https://github.com/derekross/linux-omarchy-mobile/pull/198); [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland desktop; brightness and display off/on over DCS through the S6E3FC3 panel driver and device-panther 0.1.4, merged, [kernel #177](https://github.com/derekross/linux-omarchy-mobile/pull/177); [DISPLAY-PLAN](../device/panther/DISPLAY-PLAN.md)) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; stock's interrupt pull-up and CS delay, [kernel #166](https://github.com/derekross/linux-omarchy-mobile/pull/166), the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are merged) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108); a replug comes back through `omamobile-usb-rescue` in device-panther 0.1.3, on the MAX77759's I2C bus, merged, [kernel #167](https://github.com/derekross/linux-omarchy-mobile/pull/167); [notes](../device/panther/NOTES.md#2026-10-29-usb-comes-back-after-a-replug-u1)) | no | testing (BCM4389 on the APM UART through hci_bcm with the phone's own patch, merged, [kernel #196](https://github.com/derekross/linux-omarchy-mobile/pull/196): a BLE mouse drives the shell, and headphones play over A2DP with their AVRCP buttons, on its author's Pixel 7; the Bluetooth address and the rest of the package side aren't merged yet; headset calls, suspend and power not tested) | WIP (MAX77759 fuel gauge with stock's battery model on a test kernel: percentage, capacity and temperature in upower and the bar; merged, [kernel #171](https://github.com/derekross/linux-omarchy-mobile/pull/171) and the driver fix [#170](https://github.com/derekross/linux-omarchy-mobile/pull/170); a second unit's Lishen pack isn't matched by that model yet, [notes](../device/panther/NOTES.md#2026-11-03-a-second-unit-angelrenefm); [BATTERY-PLAN](../device/panther/BATTERY-PLAN.md)) | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | testing (LM3644 rear flash, 36 steps, from the node merged in [kernel #197](https://github.com/derekross/linux-omarchy-mobile/pull/197) and the bring-up overlay `torch.dtso`, [#426](https://github.com/derekross/omarchy-mobile/pull/426): lit on a second Pixel 7; the quick-settings tile not checked) | no | no | no | no | no | no | no (the package's camera start and DMA heap rule are merged, device-panther 0.1.9, [#443](https://github.com/derekross/omarchy-mobile/pull/443), inert until the camera device tree is proposed) | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | WIP (the sensor's node, disabled, is merged, [kernel #207](https://github.com/derekross/linux-omarchy-mobile/pull/207); with a bring-up overlay and the package side, which is in review ([#458](https://github.com/derekross/omarchy-mobile/pull/458)), a finger enrolled and unlocked its author's Pixel 7, also after a reboot) | | OnePlus 13 ([notes](../device/dodge/NOTES.md)) | dodge | sm8750 (Snapdragon 8 Elite) | testing (kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [BRINGUP](../device/dodge/BRINGUP-M1.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (msm/dpu; warm-boot drop fixed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (Adreno 830 / gpu2; Vulkan untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (CDC NCM + SSH; gadget stuck after replug until reboot; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (WCN7860 / ath12k; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (pairing; A2DP untested; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (gauge; charging path not claimed; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | no | no | - | testing (speakers, earpiece, mics; headset plug untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (accel, prox, compass; autorotate; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (LTE data; calls/SMS untested; opt-in flag; [modem](../device/dodge/modem/README.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | WIP (s2idle not default; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | | OnePlus 6 ([notes](../device/enchilada/NOTES.md)) | enchilada | SDM845 (Snapdragon 845) | WIP (RAM-only `fastboot boot` of a header-v0 image; kernel: Linux 7.1-rc1 from the sdm845-mainline tree, not linux-omarchy-mobile; the firewall failure booted from `boot_b` after `--set-active=b`, the firewall fix and GPU results were `fastboot boot`s, all three with the Arch root on `userdata`; stock is not on slot A, a §3.1 event: [notes](../device/enchilada/NOTES.md#slots-and-what-is-on-them-contributingmd-31); [#432](https://github.com/derekross/omarchy-mobile/issues/432)) | WIP (UFS behind the read-only guard; `boot_b` is on LUN `sde` and stays read-only; [notes](../device/enchilada/NOTES.md#2026-11-04-ram-only-first-light)) | WIP (msm DRM framebuffer console; [notes](../device/enchilada/NOTES.md#2026-11-04-ram-only-first-light)) | no (needs the phone's own zap shader; [notes](../device/enchilada/NOTES.md#2026-11-05-adreno-630-needs-this-phones-zap-shader)) | no | no | testing (NCM + ACM + SSH; [notes](../device/enchilada/NOTES.md#2026-11-04-ram-only-first-light)) | no (modem/rmtfs plan first) | no | no | no | no | no | no | - | no | no | no | no | no | no | no | @@ -78,8 +78,8 @@ Devices we'd like to support, with the closest starting point. Open an issue to | Pixel 11 Pro, 11 Pro XL, 11 Pro Fold | grizzly, kodiak, yogi | malibu (Tensor G6) | stock facts, contributors welcome: 11 Pro ([#26](https://github.com/derekross/omarchy-mobile/issues/26)), 11 Pro XL ([#199](https://github.com/derekross/omarchy-mobile/issues/199), [notes](../device/kodiak/NOTES.md)), 11 Pro Fold ([#40](https://github.com/derekross/omarchy-mobile/issues/40)) | | Pixel 4 | flame | SM8150 (Snapdragon 855) | **WIP, community port**, in the matrix above: the RAM-only first-light probe is merged ([BRINGUP-M1](../device/flame/BRINGUP-M1.md)); the native install is in review, split out of [#17](https://github.com/derekross/omarchy-mobile/pull/17) into [#55](https://github.com/derekross/omarchy-mobile/pull/55), [#56](https://github.com/derekross/omarchy-mobile/pull/56), [#58](https://github.com/derekross/omarchy-mobile/pull/58) and [#59](https://github.com/derekross/omarchy-mobile/pull/59) | | Pixel 4 XL | coral | SM8150 (Snapdragon 855) | **WIP, community port**, in the matrix above: bring-up notes merged ([#52](https://github.com/derekross/omarchy-mobile/pull/52): [BRINGUP-M1](../device/coral/BRINGUP-M1.md), [NOTES](../device/coral/NOTES.md)), with companion kernel/userspace sources ([omarchy-mobile-coral v0.2.3](https://github.com/HemangKumawat/omarchy-mobile-coral/tree/v0.2.3)); slot-B installer and `CONTRIBUTING.md` §3.1 entry still to land | -| Xiaomi Mi 8 | dipper | SDM845 | **WIP, community port:** the RAM-only first-light probe is merged ([BRINGUP-M1](../device/dipper/BRINGUP-M1.md), [NOTES](../device/dipper/NOTES.md)); single-slot, no install path yet. Kernel: touch [#219](https://github.com/derekross/linux-omarchy-mobile/pull/219) merged, board DTS [#220](https://github.com/derekross/linux-omarchy-mobile/pull/220) and panel [#218](https://github.com/derekross/linux-omarchy-mobile/pull/218) in review. | -| POCO F3 | alioth | SM8250 (Snapdragon 870) | the first non-Pixel port: a guarded installer and root image in review ([#25](https://github.com/derekross/omarchy-mobile/pull/25)) | +| Xiaomi Mi 8 | dipper | SDM845 | **WIP, community port:** the RAM-only first-light probe is merged ([BRINGUP-M1](../device/dipper/BRINGUP-M1.md), [NOTES](../device/dipper/NOTES.md)); single-slot, no install path yet. Kernel: touch [#219](https://github.com/derekross/linux-omarchy-mobile/pull/219) merged, board DTS [#220](https://github.com/derekross/linux-omarchy-mobile/pull/220) merged, panel [#218](https://github.com/derekross/linux-omarchy-mobile/pull/218) in review. | +| POCO F3 | alioth | SM8250 (Snapdragon 870) | the first non-Pixel port: a guarded installer and root image were proposed in [#25](https://github.com/derekross/omarchy-mobile/pull/25), paused by its author and closed on 2026-11-11; it can be reopened | | OnePlus 13 | dodge | SM8750 (Snapdragon 8 Elite) | **WIP, community port**, in the matrix above: device files, notes and the qcom-abl boot images merged ([#111](https://github.com/derekross/omarchy-mobile/pull/111)); its kernel stays in the contributor's fork ([mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed: the SoC series is out of this tree's scope); the guarded installer follows in a later pull request | | OnePlus 6 | enchilada | SDM845 (Snapdragon 845) | **WIP, community port: [#432](https://github.com/derekross/omarchy-mobile/issues/432)**, in the matrix above: descriptor and notes; RAM-only (`fastboot boot`) until the slot-B install and its CONTRIBUTING.md §3.1 entry are agreed; `omamobile images` packs its header-v0 boot image, and its `UFS_RW_LUNS=sde` (the guard's second-LUN list, #530) comes with the slot-B install | | PinePhone Pro | pinephone-pro | Rockchip RK3399S | No port in this tree yet; mainline's `rk3399-pinephone-pro.dts` is already in our kernel. Prior art: [Omarchy on the PinePhone Pro](https://github.com/FlorencioJP/omarchy-mobile-pinephone-pro) |