diff --git a/device/husky/ROADMAP.md b/device/husky/ROADMAP.md index acbe4a867..93e86a9b4 100644 --- a/device/husky/ROADMAP.md +++ b/device/husky/ROADMAP.md @@ -81,7 +81,7 @@ A proposal, not a verdict; Brett and Derek know the hardware better. - Which microphone id is which hole, and what do the earpiece and headset paths need (#450, #453)? - Why does the phone draw about 0.5 A idle with the screen off, and why did the CPU idle-state and power-domain overlays reboot-loop it? Not known; no measurement plan yet. - In which file shape should the zuma System MMU v9 code and the AoC core port go (asked on #1)? -- Marking slot B successful (a `devinfo` write): decided on [#252](https://github.com/derekross/omarchy-mobile/issues/252) (2026-11-07). It is a manual, attended step, once per install of a smoke-tested image, never from a unit, with per-phone layout evidence first. The boot LUNs get the whole-disk node removed and each partition's own flag set first (its own PR, booted on the maintainer's Pixel 7 Pro), then the marking tool ([#483](https://github.com/derekross/omarchy-mobile/pull/483)). Until both are in nothing marks slot B on the 8 Pro: flash a known-good set before the boot that would use B's last try, and count every deliberate reset as a boot. On Lef's phone a local unit marked it from 2026-11-01 to 2026-11-07, after it ran out of retries once; stopped pending #252. +- Marking slot B successful (a `devinfo` write): decided on [#252](https://github.com/derekross/omarchy-mobile/issues/252) (2026-11-07). It is a manual, attended step, once per install of a smoke-tested image, never from a unit, with per-phone layout evidence first. The boot LUNs get the whole-disk node removed and each partition's own flag set first (its own PR, booted on the maintainer's Pixel 7 Pro), then the marking tool ([#483](https://github.com/derekross/omarchy-mobile/pull/483)). Until both are in nothing marks slot B on the 8 Pro: flash a known-good set before the boot that would use B's last try, and count every deliberate reset as a boot. On Lef's phone a local unit marked it from 2026-11-01 to 2026-11-07, after it ran out of retries once; stopped pending #252. On Lef's phone slot B stayed marked (`devinfo` byte 0x35 read `06`) from the unit's last write until the first flash after the unit was masked on 2026-11-07, when it read `04`. Since then, about a dozen flashes on 2026-11-07 (each followed by `fastboot set_active b`; a `flash`, which also sets B active, clears the bit) have read `slot-retry-count:b` as 3 after `set_active` and 2 after one boot, so a boot spends one of B's tries and the flash-before-the-last-try routine above applies. `slot-successful:b` was not read after those flashes, so "cleared" rests on the retry count and byte 0x35, not on the bootloader's own answer. The bit is not cleared by hand: that would be a `devinfo` write too. - Does touch survive a long idle with the screen off? One 12 h idle on 2026-11-04 left only Power working; not reproduced, not cause-checked. ## Credits and sources diff --git a/docs/DEVICES.md b/docs/DEVICES.md index b5b5733d6..82352e1a8 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -26,7 +26,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Pixel 4 | flame | SM8150 (Snapdragon 855) | testing (temporary RAM boot; [notes](../device/flame/BRINGUP-M1.md)) | testing (RAM probe; all UFS read-only) | testing (1080x2280 console; software desktop in separate Arch payload) | testing (separate Arch payload; FD640 contexts, llvmpipe desktop) | testing (separate Arch payload; events and PIN unlock verified) | no | testing (NCM + ACM + SSH; sustained transfers can disconnect) | testing (guarded RAM scan; association untested) | no | no | no | no | no | no | - | no | no | no | no | no | no | - | | Pixel 4 XL ([notes](../device/coral/NOTES.md)) | coral | SM8150 (Snapdragon 855) | WIP (direct ABL v2 boot on the test handset's slot A; slot-B install and ยง3.1 entry pending; [notes](../device/coral/BRINGUP-M1.md)) | testing (read-only `blockdev` guard + RAM `overlayfs`) | testing (1440x3040@60Hz S6E3HC2 DSC 1.1 KMS, DPMS, brightness) | testing (Adreno 640 / FD640 Mesa Freedreno, Hyprland) | testing (FTS SPI multitouch + read-only flash guard) | testing (power via `qcom-pon` + volume via `gpio-keys`) | testing (CDC ECM + ACM + SSH; stays up with host USB switched off) | testing (`WCN3990` `ath10k_snoc` + `rmtfs -r`, WPA2/DHCP/HTTPS; radio sessions ran before the modem baseline) | WIP (`WCN3990` `hci_qca` `hci0` up + BLE scan; audio/pairing open) | WIP (PM8150B ADC `VBAT_SNS` voltage + FG temp; aftermarket pack on test unit: no reply from `1-0036`) | testing (PM8150B SMB5 charger with `4.20 V` / `500 mA` kernel clamp) | testing (`CS40L25A` I2C click waveform) | testing (PM8150L flash LEDs + quick-settings tile) | no | - | testing (QDSP6 + dual `CS35L36` amps capped at `-26 dB` + `IA8508` SPI mic DSP) | testing (`SLPI` + `fastrpc` + RAM-backed `hexagonrpcd` + QMI SSC: 7 sensors + Soli radar) | WIP (`MPSS` boots with `rmtfs -r` + patched `tqftpserv`, SIM detected; no IPA/voice yet; radio sessions ran before the modem baseline) | no | testing (`CAMSS` + `IMX363`, `IMX481`, `IMX520`, dual `OV7251` NIR; `libcamera` softISP) | no | - | | Pixel 9a ([notes](../device/tegu/NOTES.md)) | tegu | zumapro (Tensor G4) | works ([#28](https://github.com/derekross/omarchy-mobile/issues/28): native boot from slot B, the Arch root on `userdata`, `omamobile-device-tegu`; slot B was marked successful by hand on 2026-10-28 with the `devinfo` write approved on 2026-10-22, now on hold ([#125](https://github.com/derekross/omarchy-mobile/pull/125)), unmarked by the 10-31 fastboot recovery and marked again on 2026-10-31 during the hold ([record](../device/tegu/NOTES.md#2026-10-31-a-fastboot-flash-of-slot-b-cleared-its-successful-mark-and-b-was-marked-again)), and the package does not mark it; unpublished kernel: the SoC and board device tree is [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (UFS behind the read-only guard; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (120 Hz through gs-decon; the panel driver [kernel #89](https://github.com/derekross/linux-omarchy-mobile/pull/89), 120 Hz [kernel #88](https://github.com/derekross/linux-omarchy-mobile/pull/88), merged, the display DT, merged with [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96); brightness, DPMS off and on and the 60/120 Hz switch on the boot of [kernel #125](https://github.com/derekross/linux-omarchy-mobile/pull/125), merged, which also checks the panel's ID; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on), [brightness record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) | works (Panthor, the desktop renders, runtime suspend when idle; this boot runs at a fixed 160 MHz; the GPU's levels and its thermal zone are merged with [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) ([kernel #85](https://github.com/derekross/linux-omarchy-mobile/pull/85) and [kernel #87](https://github.com/derekross/linux-omarchy-mobile/pull/87) landed through it), not yet run from it; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Synaptics S3908 over SPI, [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; survives sleep, [kernel #82](https://github.com/derekross/linux-omarchy-mobile/pull/82), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (gpio-keys: power and volume; the power key wakes from sleep; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CDC NCM and SSH; reconnects after a replug, `omamobile-tegu-usb-rescue`, also after a replug the gadget didn't see ([#280](https://github.com/derekross/omarchy-mobile/pull/280); [the replug record](../device/tegu/NOTES.md#2026-10-28-what-the-device-tables-claims-rest-on)); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (BCM4383 on PCIe channel 1 through the shared gs201 host and zuma PHY, [kernel #178](https://github.com/derekross/linux-omarchy-mobile/pull/178) on [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156), in review, and brcmfmac, [kernel #56](https://github.com/derekross/linux-omarchy-mobile/pull/56) in review; started at boot by `omamobile-device-tegu` 0.2.4 ([#238](https://github.com/derekross/omarchy-mobile/pull/238)) with the extractor's firmware; WPA2 with iwd, kept loaded across sleep by the package's sleep hook; [record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) | works (hci_uart on the bootloader's address, BlueZ, A2DP; [kernel #94](https://github.com/derekross/linux-omarchy-mobile/pull/94); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (MAX77779 gauge with temperature, current and time estimates through UPower; [kernel #66](https://github.com/derekross/linux-omarchy-mobile/pull/66); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (the MAX77779 charger binds from the device tree, [kernel #161](https://github.com/derekross/linux-omarchy-mobile/pull/161), merged, built by [#227](https://github.com/derekross/omarchy-mobile/pull/227); the charge limit in `omamobile-device-tegu` 0.2.3 holds charging off at the limit through `charge_behaviour` and lets it run again 5 below; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (CS40L26A through feedbackd, with brownout prevention, [kernel #95](https://github.com/derekross/linux-omarchy-mobile/pull/95); its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (LM3644, 25 steps to 75 mA, quick-settings tile; its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (Omarchy's Location switch serves fixes from GPS, Galileo, BeiDou and GLONASS once the modem is up, started by hand: a 30-minute session through the switch on 2026-11-01 (omamobile-gnss 0.2.5's start, the modem link left to cycle) ran clean, 1763 of 1765 GGA sentences fixed, first fix 37 s after a client connected; needs [kernel #150](https://github.com/derekross/linux-omarchy-mobile/pull/150), merged, the PERIC0 clock fix [kernel #172](https://github.com/derekross/linux-omarchy-mobile/pull/172), merged (without it the modem link hung the palmtop within minutes), and [#114](https://github.com/derekross/omarchy-mobile/pull/114), merged, from whose package build a session in a moving car fixed 145 of 153 times; the GNSS link driver is merged, [kernel #185](https://github.com/derekross/linux-omarchy-mobile/pull/185), loaded by hand with the modem off, and a session through it waits on the modem link; [plan](../device/tegu/MODEM-PLAN.md), record with [#202](https://github.com/derekross/omarchy-mobile/pull/202)) | works (audio and sensor DSP through the GSA and Trusty, 93 services, started at boot by `omamobile-device-tegu` 0.2.3 from the device tree, [kernel #162](https://github.com/derekross/linux-omarchy-mobile/pull/162) in review; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (the TAS2572 amplifiers and the microphone through the AoC card and PipeWire, at boot with the AoC: a tone from the speaker, the microphone at -32 dBFS; speakers at a -10 dB ceiling; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (accelerometer, light, proximity, compass and gyroscope through the AoC and the sensor proxy, at boot with the AoC; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | WIP (registered on LTE, mobile data over `rmnet0`, texts both ways and speakerphone calls in and out with `omamobile-modem-sit` ([#356](https://github.com/derekross/omarchy-mobile/pull/356), [#367](https://github.com/derekross/omarchy-mobile/pull/367)), on the owner's kernel and on in-tree drivers from the open kernel PRs ([kernel #187](https://github.com/derekross/linux-omarchy-mobile/pull/187), [kernel #162](https://github.com/derekross/linux-omarchy-mobile/pull/162)); the package doesn't start the modem, the kernel PRs aren't merged, and calls have no echo cancellation or earpiece yet; [plan](../device/tegu/MODEM-PLAN.md), [record](../device/tegu/MODEM-PLAN.md#sim-test-results-2026-11-02-730-rc6-omamobile-tegu-s2mpg15-m1-g991042e2eff3-dirty)) | works (NXP ST54L through nxp-nci, its clock pad from the PMU ([kernel #104](https://github.com/derekross/linux-omarchy-mobile/pull/104) and [kernel #105](https://github.com/derekross/linux-omarchy-mobile/pull/105), merged, with [kernel #131](https://github.com/derekross/linux-omarchy-mobile/pull/131), merged), loaded at boot by `omamobile-device-tegu` 0.2.3 with neard and the link opener: polls with no I2C errors and read a payment card; polling stops before sleep; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | works (main, ultrawide and front from the device tree, [kernel #164](https://github.com/derekross/linux-omarchy-mobile/pull/164) in review, with [kernel #63](https://github.com/derekross/linux-omarchy-mobile/pull/63) and [kernel #103](https://github.com/derekross/linux-omarchy-mobile/pull/103) in review: their drivers load at boot with nothing by hand, libcamera lists all three, and each streams, main at 19 fps and the others at 30 fps at 1280x960; basic picture quality through libcamera's software ISP; [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | testing (s2idle when asked for, or through the shell's auto-sleep with the `omamobile-sleep` toggle on, which ships off; the power key lights the lock screen on the first press ([#268](https://github.com/derekross/omarchy-mobile/pull/268), [#275](https://github.com/derekross/omarchy-mobile/pull/275)), and the RTC wakes it; on 2026-11-01 thirty attended 120 s sleeps ([plan](../device/tegu/SLEEP-PLAN.md) S1) and a day of real use with auto-sleep on ([record](../device/tegu/NOTES.md#2026-11-01-afternoon-and-evening-wi-fi-from-the-package-the-wake-and-the-replug-storage-idle-the-panel-id)) all woke, but six test sleeps since 10-28 did not (one in 21 on the clock-fix kernel on 11-01, and one in 127 in an overnight series of 120 s sleeps on 11-01 to 11-02), so sleep tests stay attended ([plan](../device/tegu/SLEEP-PLAN.md) S1); the drain is about 300 mA asleep, the same as awake with the screen off, because nothing below the CPUs sleeps yet; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (opt-in) (enrolls, matches, refuses other fingers and unlocks the lock screen through Trusty and `omamobile-fingerprint`, 2026-10-29; the sensor binds from the device tree, [kernel #165](https://github.com/derekross/linux-omarchy-mobile/pull/165) in review, with [kernel #126](https://github.com/derekross/linux-omarchy-mobile/pull/126), merged; opt-in as on the 7 Pro, because the service's first run writes Trusty's secure storage; [plan](../device/tegu/FINGERPRINT-PLAN.md), [record](../device/tegu/NOTES.md#2026-10-31-and-11-01-every-testing-row-on-a-published-style-kernel)) | -| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B; from 2026-11-01 to 2026-11-07 a local unit marked slot B on this phone; stopped pending [#252](https://github.com/derekross/omarchy-mobile/issues/252); Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer with the panel's size, [kernel #154](https://github.com/derekross/linux-omarchy-mobile/pull/154): console and Omarchy's lock screen; 120 Hz with brightness on a test kernel, [kernel #160](https://github.com/derekross/linux-omarchy-mobile/pull/160), started by the device package, [#228](https://github.com/derekross/omarchy-mobile/pull/228)) | testing (panthor on the Mali-G715 on a test kernel, [kernel #157](https://github.com/derekross/linux-omarchy-mobile/pull/157); [ROADMAP](../device/husky/ROADMAP.md)) | works (ST FTM5 over SPI, merged, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-31-the-touchscreen)) | works (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-30-the-buttons)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | testing (BCM4398D0 on the APM UART, pairing and A2DP, on a test kernel, [kernel #199](https://github.com/derekross/linux-omarchy-mobile/pull/199); firmware from the owner's image; [ROADMAP](../device/husky/ROADMAP.md)) | testing (gauge with Google's ATL model through a bring-up overlay, temperature, MFD, pack EEPROM, [kernel #163](https://github.com/derekross/linux-omarchy-mobile/pull/163) and [#175](https://github.com/derekross/linux-omarchy-mobile/pull/175); the bus on by default waits for [kernel #205](https://github.com/derekross/linux-omarchy-mobile/pull/205); [notes](../device/husky/BATTERY-NOTES.md)) | testing (the charger driver and `tcpci_maxim` as a sink, by hand under a dead-man tool: sink at the Type-C 3 A level (input limit 0xc2 0x13 to 0x77); +1.5 A measured from a 30 W charger without the driver (1.485 A is the device-tree cap); no host mode, [#282](https://github.com/derekross/omarchy-mobile/pull/282); [notes](../device/husky/BATTERY-NOTES.md), [#1](https://github.com/derekross/omarchy-mobile/issues/1#issuecomment-6562547503)) | testing (CS40L26 on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | testing (LM3644, 50 mA cap, on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | no (first steps as drafts: [kernel #210](https://github.com/derekross/linux-omarchy-mobile/pull/210), [#211](https://github.com/derekross/linux-omarchy-mobile/pull/211)) | testing (loads and runs through the GSA and Trusty on a test kernel; plan and results [AOC-PLAN](../device/husky/AOC-PLAN.md)) | testing (stereo speakers and one microphone through UCM2 and PipeWire on a test kernel, [kernel #203](https://github.com/derekross/linux-omarchy-mobile/pull/203), [#204](https://github.com/derekross/linux-omarchy-mobile/pull/204), package [#453](https://github.com/derekross/omarchy-mobile/pull/453)) | no | no | testing (a test kernel reads tags; [kernel #208](https://github.com/derekross/linux-omarchy-mobile/pull/208), [#209](https://github.com/derekross/linux-omarchy-mobile/pull/209)) | no | no | no | +| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B; from 2026-11-01 to 2026-11-07 a local unit marked slot B on Lef's phone; stopped pending [#252](https://github.com/derekross/omarchy-mobile/issues/252); Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer with the panel's size, [kernel #154](https://github.com/derekross/linux-omarchy-mobile/pull/154): console and Omarchy's lock screen; 120 Hz with brightness on a test kernel, [kernel #160](https://github.com/derekross/linux-omarchy-mobile/pull/160), started by the device package, [#228](https://github.com/derekross/omarchy-mobile/pull/228)) | testing (panthor on the Mali-G715 on a test kernel, [kernel #157](https://github.com/derekross/linux-omarchy-mobile/pull/157); [ROADMAP](../device/husky/ROADMAP.md)) | works (ST FTM5 over SPI, merged, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-31-the-touchscreen)) | works (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); verified on both phones, [notes](../device/husky/NOTES.md#2026-10-30-the-buttons)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | testing (BCM4398D0 on the APM UART, pairing and A2DP, on a test kernel, [kernel #199](https://github.com/derekross/linux-omarchy-mobile/pull/199); firmware from the owner's image; [ROADMAP](../device/husky/ROADMAP.md)) | testing (gauge with Google's ATL model through a bring-up overlay, temperature, MFD, pack EEPROM, [kernel #163](https://github.com/derekross/linux-omarchy-mobile/pull/163) and [#175](https://github.com/derekross/linux-omarchy-mobile/pull/175); the bus on by default waits for [kernel #205](https://github.com/derekross/linux-omarchy-mobile/pull/205); [notes](../device/husky/BATTERY-NOTES.md)) | testing (the charger driver and `tcpci_maxim` as a sink, by hand under a dead-man tool: sink at the Type-C 3 A level (input limit 0xc2 0x13 to 0x77); +1.5 A measured from a 30 W charger without the driver (1.485 A is the device-tree cap); no host mode, [#282](https://github.com/derekross/omarchy-mobile/pull/282); [notes](../device/husky/BATTERY-NOTES.md), [#1](https://github.com/derekross/omarchy-mobile/issues/1#issuecomment-6562547503)) | testing (CS40L26 on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | testing (LM3644, 50 mA cap, on a test kernel, [kernel #200](https://github.com/derekross/linux-omarchy-mobile/pull/200)) | no (first steps as drafts: [kernel #210](https://github.com/derekross/linux-omarchy-mobile/pull/210), [#211](https://github.com/derekross/linux-omarchy-mobile/pull/211)) | testing (loads and runs through the GSA and Trusty on a test kernel; plan and results [AOC-PLAN](../device/husky/AOC-PLAN.md)) | testing (stereo speakers and one microphone through UCM2 and PipeWire on a test kernel, [kernel #203](https://github.com/derekross/linux-omarchy-mobile/pull/203), [#204](https://github.com/derekross/linux-omarchy-mobile/pull/204), package [#453](https://github.com/derekross/omarchy-mobile/pull/453)) | no | no | testing (a test kernel reads tags; [kernel #208](https://github.com/derekross/linux-omarchy-mobile/pull/208), [#209](https://github.com/derekross/linux-omarchy-mobile/pull/209)) | no | no | no | | Pixel 8a ([notes](../device/akita/NOTES.md)) | akita | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B into the initramfs with USB and SSH, no Arch root yet; `reboot-to bootloader` reaches fastboot; the first-light board file is merged, [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [BRINGUP-M1](../device/akita/BRINGUP-M1.md), [notes](../device/akita/NOTES.md#2026-11-03-first-light-m13-and-the-console-m14)) | WIP (UFS at HS-G4 behind the read-only guard, from the initramfs only, nothing run on `userdata`; merged, [kernel #206](https://github.com/derekross/linux-omarchy-mobile/pull/206); the device package and storage plan are in review, [#456](https://github.com/derekross/omarchy-mobile/pull/456)) | WIP (simple-framebuffer: the boot console over Omarchy's splash; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192); [notes](../device/akita/NOTES.md#2026-11-03-first-light-m13-and-the-console-m14)) | no | no | no | testing (USB and SSH from the initramfs; merged with [kernel #192](https://github.com/derekross/linux-omarchy-mobile/pull/192)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; `boot` and `init_boot` carry AVB footers, which a phone whose `vbmeta_b` is stock's needs to start slot B (device-panther 0.1.6, [#396](https://github.com/derekross/omarchy-mobile/pull/396), [notes](../device/panther/NOTES.md#2026-11-02-avb-footers-on-boot-and-init_boot)); `reboot-to bootloader` reaches fastboot with `reboot=warm`, merged, [kernel #198](https://github.com/derekross/linux-omarchy-mobile/pull/198); [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland desktop; brightness and display off/on over DCS through the S6E3FC3 panel driver and device-panther 0.1.4, merged, [kernel #177](https://github.com/derekross/linux-omarchy-mobile/pull/177); [DISPLAY-PLAN](../device/panther/DISPLAY-PLAN.md)) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; stock's interrupt pull-up and CS delay, [kernel #166](https://github.com/derekross/linux-omarchy-mobile/pull/166), the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are merged) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108); a replug comes back through `omamobile-usb-rescue` in device-panther 0.1.3, on the MAX77759's I2C bus, merged, [kernel #167](https://github.com/derekross/linux-omarchy-mobile/pull/167); [notes](../device/panther/NOTES.md#2026-10-29-usb-comes-back-after-a-replug-u1)) | no | testing (BCM4389 on the APM UART through hci_bcm with the phone's own patch, merged, [kernel #196](https://github.com/derekross/linux-omarchy-mobile/pull/196): a BLE mouse drives the shell, and headphones play over A2DP with their AVRCP buttons, on its author's Pixel 7; the Bluetooth address and the rest of the package side aren't merged yet; headset calls, suspend and power not tested) | WIP (MAX77759 fuel gauge with stock's battery model on a test kernel: percentage, capacity and temperature in upower and the bar; merged, [kernel #171](https://github.com/derekross/linux-omarchy-mobile/pull/171) and the driver fix [#170](https://github.com/derekross/linux-omarchy-mobile/pull/170); a second unit's Lishen pack isn't matched by that model yet, [notes](../device/panther/NOTES.md#2026-11-03-a-second-unit-angelrenefm); [BATTERY-PLAN](../device/panther/BATTERY-PLAN.md)) | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | testing (LM3644 rear flash, 36 steps, from the node merged in [kernel #197](https://github.com/derekross/linux-omarchy-mobile/pull/197) and the bring-up overlay `torch.dtso`, [#426](https://github.com/derekross/omarchy-mobile/pull/426): lit on a second Pixel 7; the quick-settings tile not checked) | no | no | no | no | no | no | no (the package's camera start and DMA heap rule are merged, device-panther 0.1.9, [#443](https://github.com/derekross/omarchy-mobile/pull/443), inert until the camera device tree is proposed) | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | WIP (the sensor's node, disabled, is merged, [kernel #207](https://github.com/derekross/linux-omarchy-mobile/pull/207); with a bring-up overlay and the package side, which is in review ([#458](https://github.com/derekross/omarchy-mobile/pull/458)), a finger enrolled and unlocked its author's Pixel 7, also after a reboot) | | OnePlus 13 ([notes](../device/dodge/NOTES.md)) | dodge | sm8750 (Snapdragon 8 Elite) | testing (kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [BRINGUP](../device/dodge/BRINGUP-M1.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (msm/dpu; warm-boot drop fixed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (Adreno 830 / gpu2; Vulkan untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (CDC NCM + SSH; gadget stuck after replug until reboot; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (WCN7860 / ath12k; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (pairing; A2DP untested; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (gauge; charging path not claimed; kernel [mrlund/linux-omarchy-mobile `dodge-v3-20261101`](https://github.com/mrlund/linux-omarchy-mobile/tree/dodge-v3-20261101); [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115) closed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | no | no | - | testing (speakers, earpiece, mics; headset plug untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (accel, prox, compass; autorotate; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (LTE data; calls/SMS untested; opt-in flag; [modem](../device/dodge/modem/README.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | WIP (s2idle not default; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no |