diff --git a/device/lynx/NOTES.md b/device/lynx/NOTES.md index 5310fd040..083557a0f 100644 --- a/device/lynx/NOTES.md +++ b/device/lynx/NOTES.md @@ -3,6 +3,81 @@ Findings from real hardware, newest first. Tracking issue: #36. +## devinfo 3.11 read-only evidence (2026-11-06) + +The Android 15 unit reports `devinfo` version 3.11. With slot B active, +not marked successful, the eight bytes at `0x30-0x37` were: + +``` +03 00 00 00 00 0c 00 00 +``` + +The same bytes and the same fastboot state were read after one unmarked +boot through the bootloader: + +``` +slot-successful:b no +slot-unbootable:b no +slot-retry-count:b 1 +current-slot: b +``` + +`devinfo` is read-only (`blockdev --getro` = 1) on this unit, and no +write was forced while 3.11 is not in the merged table. A marked-state +row still needs either the maintainer's approval to write 3.11 or a +bootloader action that marks the slot itself. + +Both slots on this unit carry bootloader `lynx-15.2`. + +These bytes and the fastboot lines above were taken at different moments +(Linux after a boot; `getvar` from the bootloader in a separate cycle), so +this is **provisional**, not a same-state row: the retry byte reads 0 where +`getvar` reports 1, and slot A's flags differ from the 3.15 table. A +same-moment table still has to be captured. + + +Stock Android on 11-06 was a deliberate restore, not a fallback: the +factory images were flashed to slot B and Android booted from it. Stock +rewrites `efs`, `persist` and `modem_userdata`, so a fresh read-only +backup is required before any radio work. + +A same-moment row on 2026-11-13: slot B after a boot read +`03 00 00 00 01 0c 00 00` at `0x30-0x37`, then the bootloader was +entered with the buttons and read before anything booted: + +``` +slot-successful:b no +slot-unbootable:b no +slot-retry-count:b 1 +current-slot: b +``` + +The retry byte (`0x34`) is 1 in both reads, and `0x35` is `0x0c`. + +## 2026-10-30: published kernel on an Android 15 unit; devinfo 3.11 + +- **The published `omamobile` kernel brings up lynx touch on this unit.** With + the merged GT9895 node and the S2MPG12 LDO25M/LDO26M regulators, the + touchscreen binds as `Goodix Berlin Capacitive TouchScreen` (`event0`) and + Hyprland uses it. Kernel release + `7.3.0-rc6-omamobile-push1-gfbbcac19d8ea`. +- **This unit's bootloader reports devinfo 3.11, not 3.15.** It is still on the + Android 15 factory build (`BP1A.250505.005.B1`, bootloader `lynx-15.2`). + `omamobile-device-lynx` 0.2.0 only accepted 3.15, so + `omamobile-boot-success` refused to write; whether the slot was later + marked by hand is not recorded. +- **The A/B bytes are readable at the same offsets in 3.11 and 3.15.** A + read-only `omamobile-bootctl dump` decoded slot a and b on 3.11; layout + equivalence is not yet confirmed (see the provisional table below). +- **The earlier write is not recorded.** The `0x04` -> `0x06` figure came + from the 3.15 test and table, not from a phone reading. 0.2.0 refuses a + 3.11 header, and the binary that wrote slot B on 10-30 is not recorded; + no read-only `devinfo` backup was taken before it. +- **Fix:** the shared source has the `#ifdef` for 3.11 and the 7 Pro's + 3.15 condition. lynx's build does not pass the define yet, so 3.11 + writes stay off until the table is confirmed; the package test builds + its own copy with the define and rejects an unverified 3.14. + ## 2026-10-27: Wi-Fi parked - **The chip's boot ROM stops at its authentication stage,** `pbl_auth.c`, after reading only the ELF header and the hash segment of an image byte-identical to stock's. Every host-side difference two testers could act on was tried, one change per boot, and all were negative. The write-up, the ruled-out list, both stop conditions and what is left are in [WIFI-PLAN.md](WIFI-PLAN.md). The maintainer agreed on #36 that parking here is the right call. diff --git a/packages/omamobile-device-cheetah/src/omamobile-bootctl.c b/packages/omamobile-device-cheetah/src/omamobile-bootctl.c index bc63b1375..30dcd5205 100644 --- a/packages/omamobile-device-cheetah/src/omamobile-bootctl.c +++ b/packages/omamobile-device-cheetah/src/omamobile-bootctl.c @@ -163,7 +163,11 @@ static int check_header(const uint8_t *d, int for_write) fprintf(stderr, "%s: devinfo version %u.%u has no A/B data (need 3.3+)\n", argv0, maj, min); return -1; } - if (for_write && (maj != VERIFIED_VER_MAJOR || min != VERIFIED_VER_MINOR)) { + if (for_write && (maj != VERIFIED_VER_MAJOR || min != VERIFIED_VER_MINOR) +#ifdef OMAMOBILE_DEVINFO_EXTRA_MINOR + && (maj != 3 || min != OMAMOBILE_DEVINFO_EXTRA_MINOR) +#endif + ) { fprintf(stderr, "%s: devinfo version %u.%u is not the verified %u.%u layout; refusing to write\n", argv0, maj, min, VERIFIED_VER_MAJOR, VERIFIED_VER_MINOR); return -1; diff --git a/packages/omamobile-device-lynx/src/omamobile-bootctl.c b/packages/omamobile-device-lynx/src/omamobile-bootctl.c index bc63b1375..30dcd5205 100644 --- a/packages/omamobile-device-lynx/src/omamobile-bootctl.c +++ b/packages/omamobile-device-lynx/src/omamobile-bootctl.c @@ -163,7 +163,11 @@ static int check_header(const uint8_t *d, int for_write) fprintf(stderr, "%s: devinfo version %u.%u has no A/B data (need 3.3+)\n", argv0, maj, min); return -1; } - if (for_write && (maj != VERIFIED_VER_MAJOR || min != VERIFIED_VER_MINOR)) { + if (for_write && (maj != VERIFIED_VER_MAJOR || min != VERIFIED_VER_MINOR) +#ifdef OMAMOBILE_DEVINFO_EXTRA_MINOR + && (maj != 3 || min != OMAMOBILE_DEVINFO_EXTRA_MINOR) +#endif + ) { fprintf(stderr, "%s: devinfo version %u.%u is not the verified %u.%u layout; refusing to write\n", argv0, maj, min, VERIFIED_VER_MAJOR, VERIFIED_VER_MINOR); return -1; diff --git a/packages/omamobile-device-lynx/test/all b/packages/omamobile-device-lynx/test/all index ab2d94881..667efa8e4 100755 --- a/packages/omamobile-device-lynx/test/all +++ b/packages/omamobile-device-lynx/test/all @@ -84,6 +84,48 @@ grep -q '0x35: 04 -> 06' <<<"$plan" || fail "mark-successful plans one byte (0x3 cmp -s "$tmp/devinfo" "$tmp/devinfo.orig" || fail "a dry run writes nothing" pass "bootctl dry run plans one byte and writes nothing" +# 3.11: lynx units still on the Android 15 bootloader. +python3 - "$tmp/devinfo311" <<'PY3' +import struct, sys +buf = bytearray(8192) +buf[0:4] = b"DEVI" +struct.pack_into("/dev/null \ + || fail "bootctl decodes devinfo 3.11" +plan=$("$tmp/bootctl311" mark-successful "$tmp/devinfo311" b 2>&1 || true) +grep -q '0x35: 0c -> 0e' <<<"$plan" || fail "3.11 mark-successful plans one byte" +cmp -s "$tmp/devinfo311" "$tmp/devinfo311.orig" || fail "a 3.11 dry run writes nothing" +pass "bootctl accepts devinfo 3.11" + +# An unknown layout must still be refused. +python3 - "$tmp/devinfo314" <<'PY4' +import struct, sys +buf = bytearray(8192) +buf[0:4] = b"DEVI" +struct.pack_into("&1 || true) +grep -c 'refusing to write' <<<"$out" >/dev/null \ + || fail "an unverified 3.14 layout was not refused" +if grep -q 'bytes to change' <<<"$out"; then + fail "an unverified 3.14 layout was planned" +fi +out=$("$tmp/build/omamobile-bootctl" mark-successful "$tmp/devinfo311" b --i-understand 2>&1 || true) +grep -c 'refusing to write' <<<"$out" >/dev/null \ + || fail "the shipped build accepted 3.11" +if grep -q 'OMAMOBILE_DEVINFO_EXTRA_MINOR' build; then + fail "build still passes the 3.11 define" +fi +pass "bootctl refuses 3.14 and the shipped build refuses 3.11" + ./install "$tmp/root" "$tmp/build" for f in usr/bin/reboot-to usr/bin/omamobile-bootctl usr/bin/omamobile-boot-success \ usr/lib/systemd/system/omamobile-boot-success.service \