From c72bbf6bb5cd22131ecaa8edad3ca3119acddf72 Mon Sep 17 00:00:00 2001 From: Derek Ross Date: Tue, 3 Nov 2026 02:56:01 -0500 Subject: [PATCH] DEVICES: the Pixel 7 Pro's modem works (calls, texts, data on a Verizon-network SIM) Calls, texts and mobile data ran on the reference phone on 2026-11-03: VoLTE and SMS over IMS, registration in 3 s, data behind Wi-Fi. The cell names what is still by hand (the APNs and carrier manifest until #373, the opt-in boot target, the earpiece needing stage media) and what is unqualified (suspend with the modem up). Suspend stays WIP: its plan moves the cell only after a day of use with auto-sleep on (P6). Co-Authored-By: Claude Fable 5.1 Claude-Session: https://claude.ai/code/session_01BeEcdVeSfyLCbijF8XQF1d --- docs/DEVICES.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/DEVICES.md b/docs/DEVICES.md index e5056f945..eb5814d27 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -18,7 +18,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Device | Codename | SoC | Boot | Storage | Display | GPU | Touch | Buttons | USB net | Wi-Fi | Bluetooth | Battery | Charging | Haptics | Torch | GNSS | AoC | Speakers/mics | Sensors | Modem | NFC | Cameras | Suspend | Fingerprint | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | -| Pixel 7 Pro | cheetah | gs201 (Tensor G2) | works | works | works (120 Hz) | works (DVFS) | works | works | works | works | works (audio) | works | works | works | works | works | works | works | works | WIP (boots; needs a SIM) | works | works (telephoto fixed-focus) | WIP | works (opt-in) | +| Pixel 7 Pro | cheetah | gs201 (Tensor G2) | works | works | works (120 Hz) | works (DVFS) | works | works | works | works | works (audio) | works | works | works | works | works | works | works | works | works (calls, texts and mobile data on a Verizon-network SIM, 2026-11-03; see below) | works | works (telephoto fixed-focus) | WIP | works (opt-in) | | Pixel Fold | felix | gs201 (Tensor G2) | WIP ([#3](https://github.com/derekross/omarchy-mobile/issues/3)) | WIP (UFS behind the read-only guard, checked on the phone) | WIP (cover: simplefb console; inner: simpledrm output listed by Hyprland, its splash reserved by [kernel #72](https://github.com/derekross/linux-omarchy-mobile/pull/72); both panels' display triggers set by the descriptor, [#82](https://github.com/derekross/omarchy-mobile/pull/82)) | testing (Panthor; glmark2 on the cover, not up on every image yet; [notes](../device/felix/NOTES.md#2026-10-26-the-power-key-and-the-gpu-in-the-published-kernel)) | WIP (cover: chip id read, no touches yet; the driver's touch reports are merged, [kernel #48](https://github.com/derekross/linux-omarchy-mobile/pull/48), untested on the Fold; [notes](../device/felix/NOTES.md#2026-10-23-cover-touch-id)) | works (volume and power; [notes](../device/felix/NOTES.md#2026-10-26-the-power-key-and-the-gpu-in-the-published-kernel)) | works | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 6 Pro ([notes](../device/raven/NOTES.md)) | raven | gs101 (Tensor) | works ([#2](https://github.com/derekross/omarchy-mobile/issues/2)) | works | works (120 Hz through gs-decon and the S6E3HC3 driver; unpublished kernel, `omamobile-gs101-display`, in review as [kernel #116](https://github.com/derekross/linux-omarchy-mobile/pull/116), [plan](../device/raven/DISPLAY-PLAN.md)); the published kernel has the boot console only | partial (Panfrost; DVFS on an unpublished kernel, [plan](../device/raven/GPU-PLAN.md)) | works ([kernel #8](https://github.com/derekross/linux-omarchy-mobile/pull/8)) | works | works (a NOT FOR MERGE DT change; [plan](../device/raven/USB-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-wifi`; [plan](../device/raven/WIFI-PLAN.md)) | partial ([kernel #6](https://github.com/derekross/linux-omarchy-mobile/pull/6); own address; pairing untested; start-up after a warm reboot is [#77](https://github.com/derekross/omarchy-mobile/issues/77)) | works (the gauge; unpublished kernel) | works (the MAX77759 charger at stock's limits with its temperature guard, loaded at boot by device-raven 0.1.26; a full charge to 100 %; the battery node is in the published kernel, [kernel #112](https://github.com/derekross/linux-omarchy-mobile/pull/112), tested on an unpublished kernel; [plan](../device/raven/USB-PLAN.md#4-charging-the-max77759-charger-ravens-b3-after-cheetahs)) | works (CS40L25A through feedbackd, device-raven 0.1.27, with the phone's own firmware from `tools/extract-vendor-firmware -d raven`; the driver and node are merged, [kernel #114](https://github.com/derekross/linux-omarchy-mobile/pull/114); [plan](../device/raven/HAPTICS-TORCH-PLAN.md)) | works (tested on `omamobile-gs101-torch`; the LED's node is now in the published kernel, [kernel #113](https://github.com/derekross/linux-omarchy-mobile/pull/113), not yet run from it; [plan](../device/raven/HAPTICS-TORCH-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-gnss`; [plan](../device/raven/GNSS-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-aoc`; [plan](../device/raven/AUDIO-PLAN.md)) | no (the amplifiers stay off until raven's own limits are validated, and without them the card doesn't probe, so no mics either; [plan](../device/raven/AUDIO-PLAN.md#without-the-amplifiers-2026-10-27-gb3d6253b0d61-device-raven-0123)) | works (accelerometer, light, proximity, compass through the AoC; unpublished kernel) | WIP (calls, texts and data on an unpublished kernel, `omamobile-gs101-cpif`; the package doesn't enable it; [plan](../device/raven/MODEM-PLAN.md)) | no | no | no | no | | Pixel 7a ([notes](../device/lynx/NOTES.md)) | lynx | gs201 (Tensor G2) | WIP ([#36](https://github.com/derekross/omarchy-mobile/issues/36): Arch root on `userdata` from slot B, SSH; the device package marks the slot successful) | WIP (UFS behind the read-only guard, in the published kernel, [kernel #91](https://github.com/derekross/linux-omarchy-mobile/pull/91); [notes](../device/lynx/NOTES.md#2026-10-24-on-screen-console-and-ufs)) | WIP (simpledrm console only, [notes](../device/lynx/NOTES.md)) | no | WIP (GT9895 touches in the session, in the published kernel, [kernel #93](https://github.com/derekross/linux-omarchy-mobile/pull/93); [notes](../device/lynx/NOTES.md#2026-10-24-touchscreen-rtc-and-slot-retries)) | no | works | no (parked at the chip's boot ROM; [plan](../device/lynx/WIFI-PLAN.md)) | WIP (same chip as Wi-Fi; scans through its own UART; the device tree is in review, [kernel #98](https://github.com/derekross/linux-omarchy-mobile/pull/98), and the package side, [#98](https://github.com/derekross/omarchy-mobile/pull/98); [plan](../device/lynx/WIFI-PLAN.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | @@ -52,7 +52,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | AoC | works | The audio and sensor DSP starts at boot (`omamobile-aoc.service`) through the GSA and Trusty, with 82 services; sensors and the sound card use it | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) | | Speakers/mics | works | Through the AoC sound card and PipeWire (`omamobile-audio`): "Built-in Audio Speaker" (both speakers in stereo, stock channel map) and "Built-in Audio Microphone", the volume keys and quick settings. The amplifiers run Google's speaker protection firmware with the phone's factory calibration, and a watchdog mutes them on any fault. Since C9j (2026-10-27, omamobile-audio 0.5.3-0.5.4) both speakers play clean and loud: the amplifiers' boost converter is off at the everyday level (stage `media`, digital 737, analog 10), which removed the static under music, and the speaker filter is flat with 6 dB of limiter drive, which brings streamed music up while the limiters hold peaks at -3 dBFS. Since omamobile-audio 0.5.8 (2026-10-31) the default is louder on a phone with verified protection: digital 817 on both, analog 14 bottom and 11 top, with the protection firmware measuring the coils as they play (3.5 minutes of loud music held both at 60-65 °C, under the 80 °C backstop). Stock's analog 17 on both still trips the coil temperature (C9d-3..6), so the maximum stays a little below stock's. The bottom speaker's static was a word-length bug, fixed in the kernel (C9d-6, 2026-10-13); stock's Waves processing on the AoC (`omamobile-speaker-tuning`, off by default) is research (T3b/T4) | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) C7-C9, [AOC-TUNING-RESEARCH](../device/cheetah/AOC-TUNING-RESEARCH.md), [AUDIO-PLAN](../device/cheetah/AUDIO-PLAN.md) | | Sensors | works | `omamobile-sensors`: an iio-sensor-proxy D-Bus service from the AoC's USF, started at boot. Accelerometer, light, proximity and compass at every boot (the sensor rails are power-cycled before the AoC starts); auto-rotate, switched from the rotation lock tile | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) C6, [USF-PROTOCOL](../device/cheetah/USF-PROTOCOL.md) | -| Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | +| Modem | works | Calls, texts and mobile data on Verizon's network since 2026-11-03 (a Tracfone SIM; VoLTE and SMS over IMS; registration 3 s after radio on; data as a fallback route behind Wi-Fi). What made it: the modem's carrier profile answered from the owner's image, stock's bearer order (IMS first on CID 2, the internet on CID 3, CID 1 left to the attach), and the earpiece through the protection service's earpiece mode. Today: the stack starts at boot through the opt-in `omamobile-modem-boot.target` (#386), the APNs and the carrier manifest are set by hand in `modem-sit.conf` until #373 makes them automatic, call audio needs the speakers at stage `media` (the boost converter off; the louder stage and the earpiece exclude each other for now), and suspend with the modem up is unqualified (the stack holds a sleep inhibitor). Phone and Messages use it through `omamobile-mmd`. Tested from the Pixel 7 Pro: an SMS each way, a VoLTE call answered on another phone, a call with the earpiece route to voicemail | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [IMS-SHANNON](../device/cheetah/IMS-SHANNON.md), [NOTES](../device/cheetah/NOTES.md#2026-11-03-ims-registered-and-an-sms-sent-on-a-verizon-network-sim-once-the-bearers-took-stocks-cids) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 | | Cameras | works (telephoto fixed-focus) | Ultrawide (Sony IMX386, D-PHY link 2): works end to end through our CSIS/WDMA driver and libcamera's software ISP (CAM5), basic quality (no Google ISP or tuning); a libcamera build with autofocus and low-light patches is installed, not yet evaluated (CAM5.3). Front (Samsung S5K3J1, D-PHY link 0): real images, raw and through libcamera (`cam -c1`, 30 fps, no WDMA errors; F.5-F.7, 2026-10-13). Main (Samsung S5KGN1, C-PHY link 1): 2016x1136 at 30 fps through libcamera with no WDMA errors. Telephoto (S5KGM5, C-PHY): 26 fps through libcamera, colour bars correct; its lens (SEM1215) isn't driven yet, so it stays at its resting focus: distant subjects are sharp (outdoors, 2026-10-26), close ones soft, and tap to focus does nothing. The CSIS write DMA (not the link) loses lines that arrive faster than about 400 MB/s within a line, so the sensors lengthen their lines to stay under `samsung,max-line-throughput` (360 in cheetah's DT for the main, telephoto and front cameras; the front's full 3840x2736 mode runs at 26 fps). The ultrawide (imx386) follows the same rule, so its full 4032x3016 mode streams (23 fps; one run in several still showed WDMA errors), and with 384 MiB of CMA `cam` without options runs every camera at full size (main 12 MP at 9.4 fps). The telephoto's lens (SEM1215) answers on a 950 kHz bus but holds the bus when driven longer, so the telephoto runs at fixed focus. Sensor and DC-PHY settings come from the user's own camera software (`tools/extract-camera-data`), never shipped. Since omamobile-device-cheetah 0.1.30 the camera modules load after boot (`omamobile-camera.timer`), the DMA-BUF heaps are open to the session (libcamera's software ISP), WirePlumber names them Main, Ultrawide, Telephoto and Front camera (0.1.31). The default camera app is omacam ("Camera", omamobile-apps 0.2.0; [CAMERA-APP-PLAN](CAMERA-APP-PLAN.md)): libcamera directly, zoom across the three back lenses, full-resolution photos. GNOME Snapshot is optional, named "Snapshot", for video until omacam records it; browsers and video calls use the cameras through PipeWire (`pipewire-libcamera`). Picture quality: libcamera 0.7.2-4.21 adds chroma noise reduction and defective pixel correction, and omacam 0.3.3 has Night mode and an HDR chip, bursts of raw frames aligned, merged and finished on the phone (Night: 12 frames in about 4.6 s, Q5.3 on 2026-10-21); single shots are still well below stock's | [CAMERA-PLAN](../device/cheetah/CAMERA-PLAN.md), [CAMERA-QUALITY-PLAN](CAMERA-QUALITY-PLAN.md) | | Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. After its power-key test Hyprland ran neither power-key bind until `hyprctl reload`; the on-screen keyboard's virtual keyboard was reaching the hardware-key binds, which now ignore it ([#312](https://github.com/derekross/omarchy-mobile/pull/312), omamobile-shell 0.2.75; re-tested on the phone 2026-11-01, [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) P5 test h). Still open: NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) |