From bc755eac346966352689916ae4039f0d313f1687 Mon Sep 17 00:00:00 2001 From: Derek Ross Date: Mon, 2 Nov 2026 09:28:06 -0500 Subject: [PATCH 1/3] DEVICES: the Pixel 7 Pro's Suspend notes record P5's 11-01 run The cheetah Suspend cell still said P5 had stopped on the 10-26 speaker trip. SUSPEND-PLAN's 'P5 resumed, results (2026-11-01, 7.3.0-rc6-omamobile-push1-gde2f7b69334d)' (#309) records 11 suspends, 0 failures, the speaker check passing, and two open findings: the lost power-key binds after test h and NetworkManager dropping Wi-Fi per sleep. The cell stays WIP: the plan's status line moves it to works only after P6 and a release that turns auto-sleep on. Other cells checked against the newest NOTES, plan status lines and the merges since 10-26 (#320 kernel updates are offline-tested only per KERNEL-UPDATE-PLAN; #324, #327 change no device cell); DEVICES.md makes no installation or update claims to correct. Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_01BeEcdVeSfyLCbijF8XQF1d --- docs/DEVICES.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/DEVICES.md b/docs/DEVICES.md index 0a112759b..cd6b106e0 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -55,7 +55,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 | | Cameras | works (telephoto fixed-focus) | Ultrawide (Sony IMX386, D-PHY link 2): works end to end through our CSIS/WDMA driver and libcamera's software ISP (CAM5), basic quality (no Google ISP or tuning); a libcamera build with autofocus and low-light patches is installed, not yet evaluated (CAM5.3). Front (Samsung S5K3J1, D-PHY link 0): real images, raw and through libcamera (`cam -c1`, 30 fps, no WDMA errors; F.5-F.7, 2026-10-13). Main (Samsung S5KGN1, C-PHY link 1): 2016x1136 at 30 fps through libcamera with no WDMA errors. Telephoto (S5KGM5, C-PHY): 26 fps through libcamera, colour bars correct; its lens (SEM1215) isn't driven yet, so it stays at its resting focus: distant subjects are sharp (outdoors, 2026-10-26), close ones soft, and tap to focus does nothing. The CSIS write DMA (not the link) loses lines that arrive faster than about 400 MB/s within a line, so the sensors lengthen their lines to stay under `samsung,max-line-throughput` (360 in cheetah's DT for the main, telephoto and front cameras; the front's full 3840x2736 mode runs at 26 fps). The ultrawide (imx386) follows the same rule, so its full 4032x3016 mode streams (23 fps; one run in several still showed WDMA errors), and with 384 MiB of CMA `cam` without options runs every camera at full size (main 12 MP at 9.4 fps). The telephoto's lens (SEM1215) answers on a 950 kHz bus but holds the bus when driven longer, so the telephoto runs at fixed focus. Sensor and DC-PHY settings come from the user's own camera software (`tools/extract-camera-data`), never shipped. Since omamobile-device-cheetah 0.1.30 the camera modules load after boot (`omamobile-camera.timer`), the DMA-BUF heaps are open to the session (libcamera's software ISP), WirePlumber names them Main, Ultrawide, Telephoto and Front camera (0.1.31). The default camera app is omacam ("Camera", omamobile-apps 0.2.0; [CAMERA-APP-PLAN](CAMERA-APP-PLAN.md)): libcamera directly, zoom across the three back lenses, full-resolution photos. GNOME Snapshot is optional, named "Snapshot", for video until omacam records it; browsers and video calls use the cameras through PipeWire (`pipewire-libcamera`). Picture quality: libcamera 0.7.2-4.21 adds chroma noise reduction and defective pixel correction, and omacam 0.3.3 has Night mode and an HDR chip, bursts of raw frames aligned, merged and finished on the phone (Night: 12 frames in about 4.6 s, Q5.3 on 2026-10-21); single shots are still well below stock's | [CAMERA-PLAN](../device/cheetah/CAMERA-PLAN.md), [CAMERA-QUALITY-PLAN](CAMERA-QUALITY-PLAN.md) | -| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). The toggle stays off until a day of use (P6) and a power-off from Linux (P7) have run; P5 stopped on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)). Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | +| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. Two findings from that run are open: after the power-key test Hyprland ran neither power-key bind until `hyprctl reload`, and NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | | Fingerprint | works (opt-in) | Google's HAL in a chroot behind a bridge and Trusty's fingerprint TA on our kernel (F3-F9), fprintd with our libfprint driver: enrollment from the shell, and the lock screen unlocks with a finger alongside the PIN pad or password, with the keyboard usable over the lock (F16b). A verify stays open across system sleep, and an enrollment interrupted by sleep fails cleanly (libfprint 1.6, 2026-10-19). Opt-in: `omamobile-fp.service` ships disabled, because its first run writes Trusty's secure storage | [FINGERPRINT-PLAN](../device/cheetah/FINGERPRINT-PLAN.md), [FINGERPRINT-RESEARCH](../device/cheetah/FINGERPRINT-RESEARCH.md) | ## Wanted From c9fb7d80caf5b0fa8495765547355a57e682454f Mon Sep 17 00:00:00 2001 From: Derek Ross Date: Mon, 2 Nov 2026 09:28:40 -0500 Subject: [PATCH 2/3] DEVICES: the 7 Pro's lost power-key binds after P5 were fixed in #312 omamobile-shell 0.2.75 (#312, 48925ae2) excludes squeekboard's virtual keyboard from the five hardware-key binds; its commit names SUSPEND-PLAN P5's test h as the case, and the owner tested the fix on the phone (not yet recorded in SUSPEND-PLAN). Only Wi-Fi's reconnect per sleep stays open. Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_01BeEcdVeSfyLCbijF8XQF1d --- docs/DEVICES.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/DEVICES.md b/docs/DEVICES.md index cd6b106e0..ce5c76383 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -55,7 +55,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 | | Cameras | works (telephoto fixed-focus) | Ultrawide (Sony IMX386, D-PHY link 2): works end to end through our CSIS/WDMA driver and libcamera's software ISP (CAM5), basic quality (no Google ISP or tuning); a libcamera build with autofocus and low-light patches is installed, not yet evaluated (CAM5.3). Front (Samsung S5K3J1, D-PHY link 0): real images, raw and through libcamera (`cam -c1`, 30 fps, no WDMA errors; F.5-F.7, 2026-10-13). Main (Samsung S5KGN1, C-PHY link 1): 2016x1136 at 30 fps through libcamera with no WDMA errors. Telephoto (S5KGM5, C-PHY): 26 fps through libcamera, colour bars correct; its lens (SEM1215) isn't driven yet, so it stays at its resting focus: distant subjects are sharp (outdoors, 2026-10-26), close ones soft, and tap to focus does nothing. The CSIS write DMA (not the link) loses lines that arrive faster than about 400 MB/s within a line, so the sensors lengthen their lines to stay under `samsung,max-line-throughput` (360 in cheetah's DT for the main, telephoto and front cameras; the front's full 3840x2736 mode runs at 26 fps). The ultrawide (imx386) follows the same rule, so its full 4032x3016 mode streams (23 fps; one run in several still showed WDMA errors), and with 384 MiB of CMA `cam` without options runs every camera at full size (main 12 MP at 9.4 fps). The telephoto's lens (SEM1215) answers on a 950 kHz bus but holds the bus when driven longer, so the telephoto runs at fixed focus. Sensor and DC-PHY settings come from the user's own camera software (`tools/extract-camera-data`), never shipped. Since omamobile-device-cheetah 0.1.30 the camera modules load after boot (`omamobile-camera.timer`), the DMA-BUF heaps are open to the session (libcamera's software ISP), WirePlumber names them Main, Ultrawide, Telephoto and Front camera (0.1.31). The default camera app is omacam ("Camera", omamobile-apps 0.2.0; [CAMERA-APP-PLAN](CAMERA-APP-PLAN.md)): libcamera directly, zoom across the three back lenses, full-resolution photos. GNOME Snapshot is optional, named "Snapshot", for video until omacam records it; browsers and video calls use the cameras through PipeWire (`pipewire-libcamera`). Picture quality: libcamera 0.7.2-4.21 adds chroma noise reduction and defective pixel correction, and omacam 0.3.3 has Night mode and an HDR chip, bursts of raw frames aligned, merged and finished on the phone (Night: 12 frames in about 4.6 s, Q5.3 on 2026-10-21); single shots are still well below stock's | [CAMERA-PLAN](../device/cheetah/CAMERA-PLAN.md), [CAMERA-QUALITY-PLAN](CAMERA-QUALITY-PLAN.md) | -| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. Two findings from that run are open: after the power-key test Hyprland ran neither power-key bind until `hyprctl reload`, and NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | +| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. After its power-key test Hyprland ran neither power-key bind until `hyprctl reload`; the on-screen keyboard's virtual keyboard was reaching the hardware-key binds, which now ignore it ([#312](https://github.com/derekross/omarchy-mobile/pull/312), omamobile-shell 0.2.75). Still open: NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | | Fingerprint | works (opt-in) | Google's HAL in a chroot behind a bridge and Trusty's fingerprint TA on our kernel (F3-F9), fprintd with our libfprint driver: enrollment from the shell, and the lock screen unlocks with a finger alongside the PIN pad or password, with the keyboard usable over the lock (F16b). A verify stays open across system sleep, and an enrollment interrupted by sleep fails cleanly (libfprint 1.6, 2026-10-19). Opt-in: `omamobile-fp.service` ships disabled, because its first run writes Trusty's secure storage | [FINGERPRINT-PLAN](../device/cheetah/FINGERPRINT-PLAN.md), [FINGERPRINT-RESEARCH](../device/cheetah/FINGERPRINT-RESEARCH.md) | ## Wanted From f1f73435c35df6bfeb4ffa3fd63c70467158451a Mon Sep 17 00:00:00 2001 From: Derek Ross Date: Mon, 2 Nov 2026 09:51:38 -0500 Subject: [PATCH 3/3] SUSPEND-PLAN, DEVICES: record #312's attended re-test of P5 test h Derek installed omamobile-shell 0.2.75 (#312) on the 7 Pro on 2026-11-01 before it merged and re-ran the power-key double press that went dead in P5: all tests passed. The plan's test h line records it, and the DEVICES Suspend cell cites that entry. Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_01BeEcdVeSfyLCbijF8XQF1d --- device/cheetah/SUSPEND-PLAN.md | 6 +++++- docs/DEVICES.md | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/device/cheetah/SUSPEND-PLAN.md b/device/cheetah/SUSPEND-PLAN.md index b4e7b0ecf..dafc225b9 100644 --- a/device/cheetah/SUSPEND-PLAN.md +++ b/device/cheetah/SUSPEND-PLAN.md @@ -1617,7 +1617,11 @@ any wake. - **h: the behaviour passed, but afterwards Hyprland ran neither power-key bind** (the kernel saw every press; `omamobile-keys`' last-press stopped at the second press) until `hyprctl reload`. A user would have no Power until a - reboot. Being traced in Hyprland's bind handling. + reboot. **Fixed (2026-11-01, omamobile-shell 0.2.75, #312):** the + on-screen keyboard's virtual keyboard reached the hardware-key binds; they + now exclude it. Derek installed #312 on the phone and re-ran the case + attended: the power key still works after a double press ("all tests + passed"). - **g** logged no "Stay awake is on" line on the power-key request; the behaviour was right. - **Wi-Fi drops for each sleep:** the driver stays loaded (the keep flag), diff --git a/docs/DEVICES.md b/docs/DEVICES.md index ce5c76383..724d091ad 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -55,7 +55,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 | | Cameras | works (telephoto fixed-focus) | Ultrawide (Sony IMX386, D-PHY link 2): works end to end through our CSIS/WDMA driver and libcamera's software ISP (CAM5), basic quality (no Google ISP or tuning); a libcamera build with autofocus and low-light patches is installed, not yet evaluated (CAM5.3). Front (Samsung S5K3J1, D-PHY link 0): real images, raw and through libcamera (`cam -c1`, 30 fps, no WDMA errors; F.5-F.7, 2026-10-13). Main (Samsung S5KGN1, C-PHY link 1): 2016x1136 at 30 fps through libcamera with no WDMA errors. Telephoto (S5KGM5, C-PHY): 26 fps through libcamera, colour bars correct; its lens (SEM1215) isn't driven yet, so it stays at its resting focus: distant subjects are sharp (outdoors, 2026-10-26), close ones soft, and tap to focus does nothing. The CSIS write DMA (not the link) loses lines that arrive faster than about 400 MB/s within a line, so the sensors lengthen their lines to stay under `samsung,max-line-throughput` (360 in cheetah's DT for the main, telephoto and front cameras; the front's full 3840x2736 mode runs at 26 fps). The ultrawide (imx386) follows the same rule, so its full 4032x3016 mode streams (23 fps; one run in several still showed WDMA errors), and with 384 MiB of CMA `cam` without options runs every camera at full size (main 12 MP at 9.4 fps). The telephoto's lens (SEM1215) answers on a 950 kHz bus but holds the bus when driven longer, so the telephoto runs at fixed focus. Sensor and DC-PHY settings come from the user's own camera software (`tools/extract-camera-data`), never shipped. Since omamobile-device-cheetah 0.1.30 the camera modules load after boot (`omamobile-camera.timer`), the DMA-BUF heaps are open to the session (libcamera's software ISP), WirePlumber names them Main, Ultrawide, Telephoto and Front camera (0.1.31). The default camera app is omacam ("Camera", omamobile-apps 0.2.0; [CAMERA-APP-PLAN](CAMERA-APP-PLAN.md)): libcamera directly, zoom across the three back lenses, full-resolution photos. GNOME Snapshot is optional, named "Snapshot", for video until omacam records it; browsers and video calls use the cameras through PipeWire (`pipewire-libcamera`). Picture quality: libcamera 0.7.2-4.21 adds chroma noise reduction and defective pixel correction, and omacam 0.3.3 has Night mode and an HDR chip, bursts of raw frames aligned, merged and finished on the phone (Night: 12 frames in about 4.6 s, Q5.3 on 2026-10-21); single shots are still well below stock's | [CAMERA-PLAN](../device/cheetah/CAMERA-PLAN.md), [CAMERA-QUALITY-PLAN](CAMERA-QUALITY-PLAN.md) | -| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. After its power-key test Hyprland ran neither power-key bind until `hyprctl reload`; the on-screen keyboard's virtual keyboard was reaching the hardware-key binds, which now ignore it ([#312](https://github.com/derekross/omarchy-mobile/pull/312), omamobile-shell 0.2.75). Still open: NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | +| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). P5 stopped that day on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)); resumed on 2026-11-01, it passed with 11 suspends and 0 failures, the speakers fine across each sleep. After its power-key test Hyprland ran neither power-key bind until `hyprctl reload`; the on-screen keyboard's virtual keyboard was reaching the hardware-key binds, which now ignore it ([#312](https://github.com/derekross/omarchy-mobile/pull/312), omamobile-shell 0.2.75; re-tested on the phone 2026-11-01, [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) P5 test h). Still open: NetworkManager drops Wi-Fi for each sleep and reconnects about 5 s after the wake. The toggle stays off by default until a day of use (P6) and a power-off from Linux (P7) have run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | | Fingerprint | works (opt-in) | Google's HAL in a chroot behind a bridge and Trusty's fingerprint TA on our kernel (F3-F9), fprintd with our libfprint driver: enrollment from the shell, and the lock screen unlocks with a finger alongside the PIN pad or password, with the keyboard usable over the lock (F16b). A verify stays open across system sleep, and an enrollment interrupted by sleep fails cleanly (libfprint 1.6, 2026-10-19). Opt-in: `omamobile-fp.service` ships disabled, because its first run writes Trusty's secure storage | [FINGERPRINT-PLAN](../device/cheetah/FINGERPRINT-PLAN.md), [FINGERPRINT-RESEARCH](../device/cheetah/FINGERPRINT-RESEARCH.md) | ## Wanted