diff --git a/docs/DEVICES.md b/docs/DEVICES.md index cdd82684f..16cc933ef 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -26,8 +26,8 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Pixel 4 | flame | SM8150 (Snapdragon 855) | testing (temporary RAM boot; [notes](../device/flame/BRINGUP-M1.md)) | testing (RAM probe; all UFS read-only) | testing (1080x2280 console; software desktop in separate Arch payload) | testing (separate Arch payload; FD640 contexts, llvmpipe desktop) | testing (separate Arch payload; events and PIN unlock verified) | no | testing (NCM + ACM + SSH; sustained transfers can disconnect) | testing (guarded RAM scan; association untested) | no | no | no | no | no | no | - | no | no | no | no | no | no | - | | Pixel 4 XL ([notes](../device/coral/NOTES.md)) | coral | SM8150 (Snapdragon 855) | WIP (direct ABL v2 boot on the test handset's slot A; slot-B install and §3.1 entry pending; [notes](../device/coral/BRINGUP-M1.md)) | testing (read-only `blockdev` guard + RAM `overlayfs`) | testing (1440x3040@60Hz S6E3HC2 DSC 1.1 KMS, DPMS, brightness) | testing (Adreno 640 / FD640 Mesa Freedreno, Hyprland) | testing (FTS SPI multitouch + read-only flash guard) | testing (power via `qcom-pon` + volume via `gpio-keys`) | testing (CDC ECM + ACM + SSH; stays up with host USB switched off) | testing (`WCN3990` `ath10k_snoc` + `rmtfs -r`, WPA2/DHCP/HTTPS; radio sessions ran before the modem baseline) | WIP (`WCN3990` `hci_qca` `hci0` up + BLE scan; audio/pairing open) | WIP (PM8150B ADC `VBAT_SNS` voltage + FG temp; aftermarket pack on test unit: no reply from `1-0036`) | testing (PM8150B SMB5 charger with `4.20 V` / `500 mA` kernel clamp) | testing (`CS40L25A` I2C click waveform) | testing (PM8150L flash LEDs + quick-settings tile) | no | - | testing (QDSP6 + dual `CS35L36` amps capped at `-26 dB` + `IA8508` SPI mic DSP) | testing (`SLPI` + `fastrpc` + RAM-backed `hexagonrpcd` + QMI SSC: 7 sensors + Soli radar) | WIP (`MPSS` boots with `rmtfs -r` + patched `tqftpserv`, SIM detected; no IPA/voice yet; radio sessions ran before the modem baseline) | no | testing (`CAMSS` + `IMX363`, `IMX481`, `IMX520`, dual `OV7251` NIR; `libcamera` softISP) | no | - | | Pixel 9a ([notes](../device/tegu/NOTES.md)) | tegu | zumapro (Tensor G4) | works ([#28](https://github.com/derekross/omarchy-mobile/issues/28): native boot from slot B, the Arch root on `userdata`, `omamobile-device-tegu`; slot B was marked successful by hand on 2026-10-28 with the `devinfo` write approved on 2026-10-22, now on hold ([#125](https://github.com/derekross/omarchy-mobile/pull/125)), and the package does not mark it; unpublished kernel: the SoC and board device tree is [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (UFS behind the read-only guard; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (120 Hz through gs-decon; the panel driver [kernel #89](https://github.com/derekross/linux-omarchy-mobile/pull/89), 120 Hz [kernel #88](https://github.com/derekross/linux-omarchy-mobile/pull/88), merged, the display DT [kernel #90](https://github.com/derekross/linux-omarchy-mobile/pull/90) in review; brightness and the panel's sleep are not claimed until they have a dated record; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Panthor, the desktop renders, runtime suspend when idle; this boot runs at a fixed 160 MHz, so frequency scaling and the GPU thermal zone count as in review, [kernel #85](https://github.com/derekross/linux-omarchy-mobile/pull/85) in review, [kernel #87](https://github.com/derekross/linux-omarchy-mobile/pull/87) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Synaptics S3908 over SPI, [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; survives sleep, [kernel #82](https://github.com/derekross/linux-omarchy-mobile/pull/82), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (gpio-keys: power and volume; the power key wakes from sleep; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CDC NCM and SSH; reconnects after a replug, `omamobile-tegu-usb-rescue` ([the replug record](../device/tegu/NOTES.md#2026-10-28-what-the-device-tables-claims-rest-on)); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (BCM4383 on PCIe through brcmfmac, WPA2 with iwd, kept loaded across sleep by the package's sleep hook; started by hand, not by the package; [kernel #56](https://github.com/derekross/linux-omarchy-mobile/pull/56) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (hci_uart on the bootloader's address, BlueZ, A2DP; [kernel #94](https://github.com/derekross/linux-omarchy-mobile/pull/94); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (MAX77779 gauge with temperature, current and time estimates through UPower; [kernel #66](https://github.com/derekross/linux-omarchy-mobile/pull/66); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (the chip charges on its own; the charger driver with its charge limit and inhibit is loaded by hand, [kernel #92](https://github.com/derekross/linux-omarchy-mobile/pull/92); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CS40L26A through feedbackd, with brownout prevention, [kernel #95](https://github.com/derekross/linux-omarchy-mobile/pull/95); its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (LM3644, 25 steps to 75 mA, quick-settings tile; its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (a position fix on 2026-10-30 and Omarchy's Location switch serving it on 2026-10-31, started by hand: 46 of 52 GGA sentences fixed, 9-13 satellites, first fix about 80 s after a client connects; needs [kernel #150](https://github.com/derekross/linux-omarchy-mobile/pull/150) and [#114](https://github.com/derekross/omarchy-mobile/pull/114), and a session lasts as long as the modem's PCIe link, one to five minutes, which is the open item; [plan](../device/tegu/MODEM-PLAN.md), record with [#202](https://github.com/derekross/omarchy-mobile/pull/202)) | testing (audio and sensor DSP through the GSA and Trusty, 93 services; the package ships its start disabled until a kernel enables the nodes, so it is started by hand; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (speakers at a -10 dB ceiling, microphone, through the AoC card and PipeWire; by hand, as the AoC; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (accelerometer, light, proximity through the AoC; by hand, as the AoC; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (ONLINE with IPC on an unpublished kernel, no SIM yet; [plan](../device/tegu/MODEM-PLAN.md)) | testing (NXP ST54L through nxp-nci: polls and read a payment card on 2026-10-29 with [kernel #131](https://github.com/derekross/linux-omarchy-mobile/pull/131), merged ([kernel #100](https://github.com/derekross/linux-omarchy-mobile/pull/100) closed into it), [kernel #104](https://github.com/derekross/linux-omarchy-mobile/pull/104) in review; started by hand; polling stops before sleep; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (three cameras stream through libcamera; by hand; [kernel #63](https://github.com/derekross/linux-omarchy-mobile/pull/63) in review, [kernel #103](https://github.com/derekross/linux-omarchy-mobile/pull/103) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (s2idle when asked for, or through the shell's auto-sleep with the `omamobile-sleep` toggle on, which ships off; the power key or the RTC wakes it, but three test sleeps have not woken, so sleep tests stay attended ([plan](../device/tegu/SLEEP-PLAN.md) S1); the drain is about 300 mA asleep, the same as awake with the screen off, because nothing below the CPUs sleeps yet; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (enrolls, matches, refuses other fingers and unlocks the lock screen through Trusty and `omamobile-fingerprint`, 2026-10-29; the service ships disabled; [kernel #126](https://github.com/derekross/linux-omarchy-mobile/pull/126), merged; [plan](../device/tegu/FINGERPRINT-PLAN.md)) | -| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B, not marked successful; Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer: console and Omarchy's lock screen) | no | testing (ST FTM5 over SPI on a test kernel, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); [NOTES](../device/husky/NOTES.md)) | testing (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); [NOTES](../device/husky/NOTES.md)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | -| Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland lock screen) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are in review) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108); a replug comes back through `omamobile-usb-rescue` in device-panther 0.1.3, on the MAX77759's I2C bus, merged, [kernel #167](https://github.com/derekross/linux-omarchy-mobile/pull/167); [notes](../device/panther/NOTES.md#2026-10-29-usb-comes-back-after-a-replug-u1)) | no | no | WIP (MAX77759 fuel gauge with stock's battery model on a test kernel: percentage, capacity and temperature in upower and the bar; in review, [kernel #171](https://github.com/derekross/linux-omarchy-mobile/pull/171) and the driver fix [#170](https://github.com/derekross/linux-omarchy-mobile/pull/170); [BATTERY-PLAN](../device/panther/BATTERY-PLAN.md)) | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | no | no | no | no | no | no | no | no | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | no | +| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B, not marked successful; Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer: console and Omarchy's lock screen) | no | testing (ST FTM5 over SPI, merged, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); [NOTES](../device/husky/NOTES.md)) | testing (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); [NOTES](../device/husky/NOTES.md)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | +| Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland lock screen) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; stock's interrupt pull-up and CS delay, [kernel #166](https://github.com/derekross/linux-omarchy-mobile/pull/166), the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are merged) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108); a replug comes back through `omamobile-usb-rescue` in device-panther 0.1.3, on the MAX77759's I2C bus, merged, [kernel #167](https://github.com/derekross/linux-omarchy-mobile/pull/167); [notes](../device/panther/NOTES.md#2026-10-29-usb-comes-back-after-a-replug-u1)) | no | no | WIP (MAX77759 fuel gauge with stock's battery model on a test kernel: percentage, capacity and temperature in upower and the bar; in review, [kernel #171](https://github.com/derekross/linux-omarchy-mobile/pull/171) and the driver fix [#170](https://github.com/derekross/linux-omarchy-mobile/pull/170); [BATTERY-PLAN](../device/panther/BATTERY-PLAN.md)) | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | no | no | no | no | no | no | no | no | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | no | | OnePlus 13 ([notes](../device/dodge/NOTES.md)) | dodge | sm8750 (Snapdragon 8 Elite) | testing (kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [BRINGUP](../device/dodge/BRINGUP-M1.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (msm/dpu; warm-boot drop fixed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (Adreno 830 / gpu2; Vulkan untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (CDC NCM + SSH; gadget stuck after replug until reboot; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (WCN7860 / ath12k; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (pairing; A2DP untested; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (gauge; charging path not claimed; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | no | no | - | testing (speakers, earpiece, mics; headset plug untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (accel, prox, compass; autorotate; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (LTE data; calls/SMS untested; opt-in flag; [modem](../device/dodge/modem/README.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | WIP (s2idle not default; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | | *Template* | *codename* | *SoC* | | | | | | | | | | | | | | | | | | | | | | | @@ -50,7 +50,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Torch | works | LM3644TT, quick-settings tile | [HAPTICS-TORCH-PLAN](../device/cheetah/HAPTICS-TORCH-PLAN.md) | | GNSS | works | `omamobile-gnss`: Google's GNSS stack in a vendor chroot, started on demand through GeoClue, with a Location quick-settings tile. The chip streams NMEA; version 0.2.0 adds orbit assistance and time injection for a fast first fix (SUPL opt-in). First outdoor fix (G4b, 2026-10-13): four constellations in view, GPS and Galileo used, HDOP 0.4, fixes within about 4 m. GNOME Maps (in `omamobile-apps`) reads GeoClue; its outdoor check with the GPS is still to do | [GNSS-PLAN](../device/cheetah/GNSS-PLAN.md) | | AoC | works | The audio and sensor DSP starts at boot (`omamobile-aoc.service`) through the GSA and Trusty, with 82 services; sensors and the sound card use it | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) | -| Speakers/mics | works | Through the AoC sound card and PipeWire (`omamobile-audio`): "Built-in Audio Speaker" (both speakers in stereo, stock channel map) and "Built-in Audio Microphone", the volume keys and quick settings. The amplifiers run Google's speaker protection firmware with the phone's factory calibration, and a watchdog mutes them on any fault. Since C9j (2026-10-27, omamobile-audio 0.5.3-0.5.4) both speakers play clean and loud: the amplifiers' boost converter is off at the everyday level (stage `media`, digital 737, analog 10), which removed the static under music, and the speaker filter is flat with 6 dB of limiter drive, which brings streamed music up while the limiters hold peaks at -3 dBFS. Stock's own gains (817/17) are still out of reach: they trip the coil temperature (C9d-3..6), so the maximum stays a little below stock's. The bottom speaker's static was a word-length bug, fixed in the kernel (C9d-6, 2026-10-13); stock's Waves processing on the AoC (`omamobile-speaker-tuning`, off by default) is research (T3b/T4) | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) C7-C9, [AOC-TUNING-RESEARCH](../device/cheetah/AOC-TUNING-RESEARCH.md), [AUDIO-PLAN](../device/cheetah/AUDIO-PLAN.md) | +| Speakers/mics | works | Through the AoC sound card and PipeWire (`omamobile-audio`): "Built-in Audio Speaker" (both speakers in stereo, stock channel map) and "Built-in Audio Microphone", the volume keys and quick settings. The amplifiers run Google's speaker protection firmware with the phone's factory calibration, and a watchdog mutes them on any fault. Since C9j (2026-10-27, omamobile-audio 0.5.3-0.5.4) both speakers play clean and loud: the amplifiers' boost converter is off at the everyday level (stage `media`, digital 737, analog 10), which removed the static under music, and the speaker filter is flat with 6 dB of limiter drive, which brings streamed music up while the limiters hold peaks at -3 dBFS. Since omamobile-audio 0.5.8 (2026-10-31) the default is louder on a phone with verified protection: digital 817 on both, analog 14 bottom and 11 top, with the protection firmware measuring the coils as they play (3.5 minutes of loud music held both at 60-65 °C, under the 80 °C backstop). Stock's analog 17 on both still trips the coil temperature (C9d-3..6), so the maximum stays a little below stock's. The bottom speaker's static was a word-length bug, fixed in the kernel (C9d-6, 2026-10-13); stock's Waves processing on the AoC (`omamobile-speaker-tuning`, off by default) is research (T3b/T4) | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) C7-C9, [AOC-TUNING-RESEARCH](../device/cheetah/AOC-TUNING-RESEARCH.md), [AUDIO-PLAN](../device/cheetah/AUDIO-PLAN.md) | | Sensors | works | `omamobile-sensors`: an iio-sensor-proxy D-Bus service from the AoC's USF, started at boot. Accelerometer, light, proximity and compass at every boot (the sensor rails are power-cycled before the AoC starts); auto-rotate, switched from the rotation lock tile | [AOC-PLAN](../device/cheetah/AOC-PLAN.md) C6, [USF-PROTOCOL](../device/cheetah/USF-PROTOCOL.md) | | Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 |