From c657e93223ac077e4911b6f7473c57f18c8a62ae Mon Sep 17 00:00:00 2001 From: Brett-Michael Green Date: Sat, 31 Oct 2026 12:21:12 -0400 Subject: [PATCH] device/husky: Wi-Fi on a test kernel A NOTES entry for the BCM4398 under kernel #156 (draft): the chip and its NCI backplane, the pins, zuma's PCIe PHY, how stock picks the firmware files (#214 does the same), what brcmfmac needed, the reload fix, throughput, what isn't done, and the BAR read that hung the phone. DEVICES and the ROADMAP move husky's Wi-Fi from no to testing: it is not in the kernel the image ships until #156 and the PRs under it land. Co-Authored-By: Claude Opus 5.5 Signed-off-by: Brett-Michael Green --- device/husky/NOTES.md | 28 ++++++++++++++++++++++++++++ device/husky/ROADMAP.md | 4 ++-- docs/DEVICES.md | 2 +- 3 files changed, 31 insertions(+), 3 deletions(-) diff --git a/device/husky/NOTES.md b/device/husky/NOTES.md index 2c7522e96..381a1eecc 100644 --- a/device/husky/NOTES.md +++ b/device/husky/NOTES.md @@ -10,6 +10,34 @@ Sources: - `P/`: postmarketOS pmaports `device/testing` (2026-10-21). - `G/`: Google's GPL kernel for this phone, `android-gs-shusky-6.1-android16` ([source.android.com: Build Pixel kernels](https://source.android.com/docs/setup/build/building-pixel-kernels)). +## 2026-10-31: Wi-Fi + +Wi-Fi works on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156) (a draft, stacked on #153, #143 and #56), at `f47c5bd34` on greenbrettmichael/linux-omarchy-mobile `omamobile-zuma-husky-wifi`, with the repository's husky config (`CONFIG_PHY_ZUMA_PCIE=m` is in #214), `modules-push` and the firmware from [#214](https://github.com/derekross/omarchy-mobile/pull/214). The phone joins its network at boot through NetworkManager. #156 has since been rebased to `717fba4f`; the only change is #143's join-parameter struct (`chanspec_list[1]` to `chanspec_list[]`). The phone joined at boot on that head too, as part of the display test kernel (tag `husky-test-20261031-d3`, which contains `717fba4f`), on 2026-10-31. + +- **The chip** [V]: a BCM4398 D0 (chip `0x4398` rev 3, PCI `14e4:4444`) on pcie_1, one Gen3 lane, as on stock. + - Its backplane is Broadcom's newer NCI interconnect (socitype 6), not AI. #156 ports enough of Google's `nciutils.c` to brcmfmac to find the cores and run the ARM. + - The firmware is stock's 24.100.671.86.2 (shared-memory API 9). +- **Power and pins** [V, `R/` live DT]: WL_REG_ON is `gph3-4`, PERST `gph3-0`, CLKREQ `gph3-1`, dev_wake `gph3-5` and host_wake `gpa5-1` (FAR_ALIVE). BT_REG_ON (`gpn8-0`) isn't wired yet. +- **The PCIe PHY** [V, `G/`]: zuma's Gen3 PHY is not gs201's, so #156 adds its own driver from stock's tables, and releases the PHY's isolation through the PMU (0x3ec8). The host is gs201's driver with a zuma compatible. +- **The firmware files** [V, the first husky's stock log]: stock loads `fw_bcmdhd.bin_4398_d0`, `bcmdhd_clm.blob_4398_d0` and `bcmdhd_txcap.blob_4398_d0` by chip revision. + - It picks the NVRAM by the hardware SKU: `bcmdhd.cal_MMW` on this phone. + - `tools/extract-vendor-firmware -d husky -s SKU` (#214) does the same from the owner's own image. +- **What brcmfmac needed** [V]: + - `event_msgs_ext`, a 4-entry band list, escan v3, v114 BSS info, and the versioned join without firmware supplicant; + - control buffers at the lowest packet IDs; + - D2H items read only after the firmware's checksum and epoch say they're finished; + - the 4389's host-side 802.3/LLC TX header (without it the firmware trapped in `txq_hw_fill`); + - a wait for the firmware's boot interrupt before reading its shared address. +- **Reloading** [V]: the chip's always-on domain keeps the firmware's state across WL_REG_ON, FLR and a PMU watchdog. A second load got no boot interrupt until the phone rebooted. + - #156 makes the firmware trap before release (doorbell 7, `0xdead0002`, as bcmdhd's `DHD_DONGLE_TRAP_IN_DETACH`). + - Since then, `brcmfmac` reloads and `pcie_gs201` + `brcmfmac` reloads reconnect in 17–18 s. +- **Throughput** [V]: on 2.4 GHz at -44 to -46 dBm (216 Mbit/s receive rate), 108–132 Mbit/s down over five 50 MB downloads from Cloudflare, and 58–73 up; 11 ms to 1.1.1.1, with no loss. A Pixel 9 gets about 95 down on the same network. That's on `husky-test-20261101-e1`, 2026-11-01, over a Gen3 x1 link with INTx: all the Wi-Fi interrupts land on CPU0, which was 22–48 % busy at 132 Mbit/s, so INTx isn't the limit at these rates. Earlier test kernels got 50–87 down and 47–70 up. The scan sees 5 GHz networks; none was joined yet. +- **Not done** [V]: + - P2P: `brcmf_p2p_create_p2pdev: timeout occurred` at load, since the firmware never confirms the P2P device interface. Station mode doesn't need it. + - A reload after a real firmware crash, which can't take the trap, is untested. + - Bluetooth. +- **Lesson** [V]: a raw `/dev/mem` read of the Wi-Fi chip's BAR0 while it was in a bad state hung the phone, which panicked and rebooted. Don't read the endpoint's BARs from userspace. + ## 2026-10-31: a second phone: Kioxia 256 GB, UFS 4.0 A second retail Pixel 8 Pro, first run through the same read-only steps. `R2/` below means read-only queries of this phone (`adb shell getprop` while booted, `fastboot getvar all`, the fastboot screen), facts only, no serial, IMEI or MACs. The kernel is `omamobile` at `1c5ba1aa2` unless noted. diff --git a/device/husky/ROADMAP.md b/device/husky/ROADMAP.md index 09f9e0cfa..847e42b25 100644 --- a/device/husky/ROADMAP.md +++ b/device/husky/ROADMAP.md @@ -29,7 +29,7 @@ Status words as in DEVICES.md. "9a" is the Pixel 9a (`tegu`) work. "Needs" lists | Touch | testing (c6) | [Brett](https://github.com/greenbrettmichael) | done | [#153](https://github.com/derekross/linux-omarchy-mobile/pull/153) in review; the ACPM probe order fix (Brett); W4HO's [#150](https://github.com/derekross/linux-omarchy-mobile/pull/150) fixes the SPI FIFO flush for every port (not needed for touch) | none: re-test after each kernel | | Buttons | testing (c6) | Brett | done | [#148](https://github.com/derekross/linux-omarchy-mobile/pull/148) in review | none | | USB net | testing | Brett (per his comments on #1) | done | USB host and Type-C are in Charging | none | -| Wi-Fi | no | Brett (per his comment on #1) | 9a [#56](https://github.com/derekross/linux-omarchy-mobile/pull/56) (BCM4383, open); cheetah [#143](https://github.com/derekross/linux-omarchy-mobile/pull/143) (BCM4389, open); [WIFI-BATTERY-PLAN](../cheetah/WIFI-BATTERY-PLAN.md) | BCM4398: the PCIe link comes up (Gen3 x1, `14e4:4444`), then `brcmfmac` stops at "chip backplane type 6 is not supported": the chip uses Broadcom's newer NCI interconnect, which Brett is porting from Google's GPL driver ([his status on #1](https://github.com/derekross/omarchy-mobile/issues/1#issuecomment-6543682102)) | Review and test his branches when they appear; read WIFI-BATTERY-PLAN W1 to W4 meanwhile | +| Wi-Fi | testing | [Brett](https://github.com/greenbrettmichael) | done | [#156](https://github.com/derekross/linux-omarchy-mobile/pull/156) (draft): zuma's PCIe PHY and the BCM4398 (NCI backplane) in brcmfmac, stacked on #153, #143 (BCM4389) and #56 (API9), which have to land first; firmware from the owner's image with [#214](https://github.com/derekross/omarchy-mobile/pull/214). Open: P2P, recovery after a firmware crash, joining 5 GHz ([NOTES](NOTES.md)) | Test #156 on a second phone: `tools/extract-vendor-firmware -d husky -s `, then check the scan and a join | | Bluetooth | no | unassigned | 9a [#122](https://github.com/derekross/linux-omarchy-mobile/pull/122) (open); cheetah [BLUETOOTH-PLAN](../cheetah/BLUETOOTH-PLAN.md) | The controller is probably the combo chip that does Wi-Fi [I]; its UART, power and wake lines [I: not known to me] | Find the Bluetooth node in Google's tree; write `BLUETOOTH-PLAN.md` | | Battery | no | Lef | cheetah [POWER-PLAN](../cheetah/POWER-PLAN.md), [WIFI-BATTERY-PLAN](../cheetah/WIFI-BATTERY-PLAN.md); `gs201-cheetah.dts` has the same chip family. The 9a's [#119](https://github.com/derekross/linux-omarchy-mobile/pull/119) is the MAX77779 and does not apply as is | Stock overlay [V, same source as Display]: fuel gauge `maxim,max77759` @0x36, charger `max77759chrg` @0x69, Type-C `max77759tcpc` @0x25 and `max77729pmic` @0x66, all on `hsi2c_11`; also `nxp,pca9468` and the wireless charger `idt,p9412`. Zuma has no clock controller for that I2C block yet (CMU_PERIC, not in `clk-zuma.c`) and no I2C or USI nodes [V]. `tools/phone-smoke` reports "no battery power supply" [V] | Derive the PERIC clocks from Google's cmucal tables, add the I2C nodes, then probe the gauge read-only. **Do not poke the PMIC from userspace** (AGENTS.md §1) | | Charging, USB-C | no | Lef | cheetah [USB-C-PLAN](../cheetah/USB-C-PLAN.md); 9a: [#97](https://github.com/derekross/linux-omarchy-mobile/pull/97) is `tcpci_maxim` for the MAX77779 (merged), so check what husky's MAX77759 needs [I] | Same I2C bus as Battery; the USB data switch closes on unplug (AGENTS.md gotcha) | As Battery | @@ -56,7 +56,7 @@ A proposal, not a verdict; Brett and Derek know the hardware better. 5. **Suspend**, after UFS hibern8 and the regulators; then **Bluetooth** once the combo chip's firmware path is clear (it depends on the Wi-Fi work), then **audio, sensors, fingerprint**, each gated. 6. **Modem** once a SIM is found, after power, USB-C and the NV-protection steps in MODEM-PLAN. -Brett has Wi-Fi; coordinate on #1. +Wi-Fi works on a test kernel (#156); a second phone's test is the next step there. ## How to help without risking a phone diff --git a/docs/DEVICES.md b/docs/DEVICES.md index ab54c4743..b1d123464 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -26,7 +26,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Pixel 4 | flame | SM8150 (Snapdragon 855) | testing (temporary RAM boot; [notes](../device/flame/BRINGUP-M1.md)) | testing (RAM probe; all UFS read-only) | testing (1080x2280 console; software desktop in separate Arch payload) | testing (separate Arch payload; FD640 contexts, llvmpipe desktop) | testing (separate Arch payload; events and PIN unlock verified) | no | testing (NCM + ACM + SSH; sustained transfers can disconnect) | testing (guarded RAM scan; association untested) | no | no | no | no | no | no | - | no | no | no | no | no | no | - | | Pixel 4 XL ([notes](../device/coral/NOTES.md)) | coral | SM8150 (Snapdragon 855) | WIP (direct ABL v2 boot on the test handset's slot A; slot-B install and §3.1 entry pending; [notes](../device/coral/BRINGUP-M1.md)) | testing (read-only `blockdev` guard + RAM `overlayfs`) | testing (1440x3040@60Hz S6E3HC2 DSC 1.1 KMS, DPMS, brightness) | testing (Adreno 640 / FD640 Mesa Freedreno, Hyprland) | testing (FTS SPI multitouch + read-only flash guard) | testing (power via `qcom-pon` + volume via `gpio-keys`) | testing (CDC ECM + ACM + SSH; stays up with host USB switched off) | testing (`WCN3990` `ath10k_snoc` + `rmtfs -r`, WPA2/DHCP/HTTPS; radio sessions ran before the modem baseline) | WIP (`WCN3990` `hci_qca` `hci0` up + BLE scan; audio/pairing open) | WIP (PM8150B ADC `VBAT_SNS` voltage + FG temp; aftermarket pack on test unit: no reply from `1-0036`) | testing (PM8150B SMB5 charger with `4.20 V` / `500 mA` kernel clamp) | testing (`CS40L25A` I2C click waveform) | testing (PM8150L flash LEDs + quick-settings tile) | no | - | testing (QDSP6 + dual `CS35L36` amps capped at `-26 dB` + `IA8508` SPI mic DSP) | testing (`SLPI` + `fastrpc` + RAM-backed `hexagonrpcd` + QMI SSC: 7 sensors + Soli radar) | WIP (`MPSS` boots with `rmtfs -r` + patched `tqftpserv`, SIM detected; no IPA/voice yet; radio sessions ran before the modem baseline) | no | testing (`CAMSS` + `IMX363`, `IMX481`, `IMX520`, dual `OV7251` NIR; `libcamera` softISP) | no | - | | Pixel 9a ([notes](../device/tegu/NOTES.md)) | tegu | zumapro (Tensor G4) | works ([#28](https://github.com/derekross/omarchy-mobile/issues/28): native boot from slot B, the Arch root on `userdata`, `omamobile-device-tegu`; slot B was marked successful by hand on 2026-10-28 with the `devinfo` write approved on 2026-10-22, now on hold ([#125](https://github.com/derekross/omarchy-mobile/pull/125)), and the package does not mark it; unpublished kernel: the SoC and board device tree is [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (UFS behind the read-only guard; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (120 Hz through gs-decon; the panel driver [kernel #89](https://github.com/derekross/linux-omarchy-mobile/pull/89), 120 Hz [kernel #88](https://github.com/derekross/linux-omarchy-mobile/pull/88), merged, the display DT [kernel #90](https://github.com/derekross/linux-omarchy-mobile/pull/90) in review; brightness and the panel's sleep are not claimed until they have a dated record; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Panthor, the desktop renders, runtime suspend when idle; this boot runs at a fixed 160 MHz, so frequency scaling and the GPU thermal zone count as in review, [kernel #85](https://github.com/derekross/linux-omarchy-mobile/pull/85) in review, [kernel #87](https://github.com/derekross/linux-omarchy-mobile/pull/87) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (Synaptics S3908 over SPI, [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), merged; survives sleep, [kernel #82](https://github.com/derekross/linux-omarchy-mobile/pull/82), merged; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (gpio-keys: power and volume; the power key wakes from sleep; unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CDC NCM and SSH; reconnects after a replug, `omamobile-tegu-usb-rescue` ([the replug record](../device/tegu/NOTES.md#2026-10-28-what-the-device-tables-claims-rest-on)); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (BCM4383 on PCIe through brcmfmac, WPA2 with iwd, kept loaded across sleep by the package's sleep hook; started by hand, not by the package; [kernel #56](https://github.com/derekross/linux-omarchy-mobile/pull/56) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (hci_uart on the bootloader's address, BlueZ, A2DP; [kernel #94](https://github.com/derekross/linux-omarchy-mobile/pull/94); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (MAX77779 gauge with temperature, current and time estimates through UPower; [kernel #66](https://github.com/derekross/linux-omarchy-mobile/pull/66); unpublished kernel; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (the chip charges on its own; the charger driver with its charge limit and inhibit is loaded by hand, [kernel #92](https://github.com/derekross/linux-omarchy-mobile/pull/92); [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (CS40L26A through feedbackd, with brownout prevention, [kernel #95](https://github.com/derekross/linux-omarchy-mobile/pull/95); its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | works (LM3644, 25 steps to 75 mA, quick-settings tile; its DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (a position fix on 2026-10-30 and Omarchy's Location switch serving it on 2026-10-31, started by hand: 46 of 52 GGA sentences fixed, 9-13 satellites, first fix about 80 s after a client connects; needs [kernel #150](https://github.com/derekross/linux-omarchy-mobile/pull/150) and [#114](https://github.com/derekross/omarchy-mobile/pull/114), and a session lasts as long as the modem's PCIe link, one to five minutes, which is the open item; [plan](../device/tegu/MODEM-PLAN.md), record with [#202](https://github.com/derekross/omarchy-mobile/pull/202)) | testing (audio and sensor DSP through the GSA and Trusty, 93 services; the package ships its start disabled until a kernel enables the nodes, so it is started by hand; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (speakers at a -10 dB ceiling, microphone, through the AoC card and PipeWire; by hand, as the AoC; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (accelerometer, light, proximity through the AoC; by hand, as the AoC; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (ONLINE with IPC on an unpublished kernel, no SIM yet; [plan](../device/tegu/MODEM-PLAN.md)) | testing (NXP ST54L through nxp-nci: polls and read a payment card on 2026-10-29 with [kernel #131](https://github.com/derekross/linux-omarchy-mobile/pull/131), merged ([kernel #100](https://github.com/derekross/linux-omarchy-mobile/pull/100) closed into it), [kernel #104](https://github.com/derekross/linux-omarchy-mobile/pull/104) in review; started by hand; polling stops before sleep; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (three cameras stream through libcamera; by hand; [kernel #63](https://github.com/derekross/linux-omarchy-mobile/pull/63) in review, [kernel #103](https://github.com/derekross/linux-omarchy-mobile/pull/103) in review; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | WIP (s2idle when asked for, or through the shell's auto-sleep with the `omamobile-sleep` toggle on, which ships off; the power key or the RTC wakes it, but three test sleeps have not woken, so sleep tests stay attended ([plan](../device/tegu/SLEEP-PLAN.md) S1); the drain is about 300 mA asleep, the same as awake with the screen off, because nothing below the CPUs sleeps yet; [record](../device/tegu/NOTES.md#2026-10-29-the-device-package-boot-and-what-this-row-rests-on)) | testing (enrolls, matches, refuses other fingers and unlocks the lock screen through Trusty and `omamobile-fingerprint`, 2026-10-29; the service ships disabled; [kernel #126](https://github.com/derekross/linux-omarchy-mobile/pull/126), merged; [plan](../device/tegu/FINGERPRINT-PLAN.md)) | -| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B, not marked successful; Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer: console and Omarchy's lock screen) | no | testing (ST FTM5 over SPI on a test kernel, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); [NOTES](../device/husky/NOTES.md)) | testing (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); [NOTES](../device/husky/NOTES.md)) | testing (USB and SSH) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | +| Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): slot B, not marked successful; Omarchy's image from the signed repository boots to the lock screen; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13), [#53](https://github.com/derekross/linux-omarchy-mobile/pull/53))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer: console and Omarchy's lock screen) | no | testing (ST FTM5 over SPI on a test kernel, [kernel #153](https://github.com/derekross/linux-omarchy-mobile/pull/153); [NOTES](../device/husky/NOTES.md)) | testing (power and volume through `gpio-keys`, merged, [kernel #148](https://github.com/derekross/linux-omarchy-mobile/pull/148); [NOTES](../device/husky/NOTES.md)) | testing (USB and SSH) | testing (BCM4398 on a test kernel, [kernel #156](https://github.com/derekross/linux-omarchy-mobile/pull/156); firmware from the owner's image, [#214](https://github.com/derekross/omarchy-mobile/pull/214); [NOTES](../device/husky/NOTES.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland lock screen) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are in review) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; a replug needs a reboot; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | no | no | no | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | no | no | no | no | no | no | no | no | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | no | | OnePlus 13 ([notes](../device/dodge/NOTES.md)) | dodge | sm8750 (Snapdragon 8 Elite) | testing (kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [BRINGUP](../device/dodge/BRINGUP-M1.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (msm/dpu; warm-boot drop fixed; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (Adreno 830 / gpu2; Vulkan untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing ([notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (CDC NCM + SSH; gadget stuck after replug until reboot; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (WCN7860 / ath12k; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (pairing; A2DP untested; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (gauge; charging path not claimed; kernel in review, [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | no | no | - | testing (speakers, earpiece, mics; headset plug untested; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (accel, prox, compass; autorotate; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | testing (LTE data; calls/SMS untested; opt-in flag; [modem](../device/dodge/modem/README.md), [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | no | WIP (s2idle not default; [notes](../device/dodge/NOTES.md#2026-10-28-matrix-evidence)) | no | | *Template* | *codename* | *SoC* | | | | | | | | | | | | | | | | | | | | | | |