diff --git a/docs/DEVICES.md b/docs/DEVICES.md index 88bbd7f4c..6f54a75b4 100644 --- a/docs/DEVICES.md +++ b/docs/DEVICES.md @@ -20,21 +20,21 @@ The status of each device, as verified on real hardware. Rows in the matrix have | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | Pixel 7 Pro | cheetah | gs201 (Tensor G2) | works | works | works (120 Hz) | works (DVFS) | works | works | works | works | works (audio) | works | works | works | works | works | works | works | works | WIP (boots; needs a SIM) | works | works (telephoto fixed-focus) | WIP | works (opt-in) | | Pixel Fold | felix | gs201 (Tensor G2) | WIP ([#3](https://github.com/derekross/omarchy-mobile/issues/3)) | WIP (UFS behind the read-only guard, checked on the phone) | WIP (cover: simplefb console; inner: simpledrm output listed by Hyprland, its splash reserved by [kernel #72](https://github.com/derekross/linux-omarchy-mobile/pull/72); both panels' display triggers set by the descriptor, [#82](https://github.com/derekross/omarchy-mobile/pull/82)) | testing (Panthor; glmark2 on the cover, not up on every image yet; [notes](../device/felix/NOTES.md#2026-10-26-the-power-key-and-the-gpu-in-the-published-kernel)) | WIP (cover: chip id read, no touches yet; the driver's touch reports are merged, [kernel #48](https://github.com/derekross/linux-omarchy-mobile/pull/48), untested on the Fold; [notes](../device/felix/NOTES.md#2026-10-23-cover-touch-id)) | works (volume and power; [notes](../device/felix/NOTES.md#2026-10-26-the-power-key-and-the-gpu-in-the-published-kernel)) | works | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | -| Pixel 6 Pro ([notes](../device/raven/NOTES.md)) | raven | gs101 (Tensor) | works ([#2](https://github.com/derekross/omarchy-mobile/issues/2)) | works | works (120 Hz through gs-decon and the S6E3HC3 driver; unpublished kernel, `omamobile-gs101-display`, [plan](../device/raven/DISPLAY-PLAN.md)); the published kernel has the boot console only | partial (Panfrost; DVFS on an unpublished kernel, [plan](../device/raven/GPU-PLAN.md)) | works ([kernel #8](https://github.com/derekross/linux-omarchy-mobile/pull/8)) | works | works (a NOT FOR MERGE DT change; [plan](../device/raven/USB-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-wifi`; [plan](../device/raven/WIFI-PLAN.md)) | partial ([kernel #6](https://github.com/derekross/linux-omarchy-mobile/pull/6); own address; pairing untested; start-up after a warm reboot is [#77](https://github.com/derekross/omarchy-mobile/issues/77)) | works (the gauge; unpublished kernel) | works (the MAX77759 charger at stock's limits with its temperature guard, loaded at boot by device-raven 0.1.26; a full charge to 100 %; the battery node is in the published kernel, [kernel #112](https://github.com/derekross/linux-omarchy-mobile/pull/112), tested on an unpublished kernel; [plan](../device/raven/USB-PLAN.md#4-charging-the-max77759-charger-ravens-b3-after-cheetahs)) | no | works (tested on `omamobile-gs101-torch`; the LED's node is now in the published kernel, [kernel #113](https://github.com/derekross/linux-omarchy-mobile/pull/113), not yet run from it; [plan](../device/raven/HAPTICS-TORCH-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-gnss`; [plan](../device/raven/GNSS-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-aoc`; [plan](../device/raven/AUDIO-PLAN.md)) | no (the amplifiers stay off until raven's own limits are validated, and without them the card doesn't probe, so no mics either; [plan](../device/raven/AUDIO-PLAN.md#without-the-amplifiers-2026-10-27-gb3d6253b0d61-device-raven-0123)) | works (accelerometer, light, proximity, compass through the AoC; unpublished kernel) | WIP (calls, texts and data on an unpublished kernel, `omamobile-gs101-cpif`; the package doesn't enable it; [plan](../device/raven/MODEM-PLAN.md)) | no | no | no | no | -| Pixel 7a ([notes](../device/lynx/NOTES.md)) | lynx | gs201 (Tensor G2) | WIP ([#36](https://github.com/derekross/omarchy-mobile/issues/36): Arch root on `userdata` from slot B, SSH; the device package marks the slot successful) | WIP (UFS behind the read-only guard, in the published kernel, [kernel #91](https://github.com/derekross/linux-omarchy-mobile/pull/91); [notes](../device/lynx/NOTES.md#2026-10-24-on-screen-console-and-ufs)) | WIP (simpledrm console only, [notes](../device/lynx/NOTES.md)) | no | WIP (GT9895 touches in the session, in the published kernel, [kernel #93](https://github.com/derekross/linux-omarchy-mobile/pull/93); [notes](../device/lynx/NOTES.md#2026-10-24-touchscreen-rtc-and-slot-retries)) | no | works | no (parked at the chip's boot ROM; [plan](../device/lynx/WIFI-PLAN.md)) | no (same chip as Wi-Fi; [plan](../device/lynx/WIFI-PLAN.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | +| Pixel 6 Pro ([notes](../device/raven/NOTES.md)) | raven | gs101 (Tensor) | works ([#2](https://github.com/derekross/omarchy-mobile/issues/2)) | works | works (120 Hz through gs-decon and the S6E3HC3 driver; unpublished kernel, `omamobile-gs101-display`, in review as [kernel #116](https://github.com/derekross/linux-omarchy-mobile/pull/116), [plan](../device/raven/DISPLAY-PLAN.md)); the published kernel has the boot console only | partial (Panfrost; DVFS on an unpublished kernel, [plan](../device/raven/GPU-PLAN.md)) | works ([kernel #8](https://github.com/derekross/linux-omarchy-mobile/pull/8)) | works | works (a NOT FOR MERGE DT change; [plan](../device/raven/USB-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-wifi`; [plan](../device/raven/WIFI-PLAN.md)) | partial ([kernel #6](https://github.com/derekross/linux-omarchy-mobile/pull/6); own address; pairing untested; start-up after a warm reboot is [#77](https://github.com/derekross/omarchy-mobile/issues/77)) | works (the gauge; unpublished kernel) | works (the MAX77759 charger at stock's limits with its temperature guard, loaded at boot by device-raven 0.1.26; a full charge to 100 %; the battery node is in the published kernel, [kernel #112](https://github.com/derekross/linux-omarchy-mobile/pull/112), tested on an unpublished kernel; [plan](../device/raven/USB-PLAN.md#4-charging-the-max77759-charger-ravens-b3-after-cheetahs)) | works (CS40L25A through feedbackd, device-raven 0.1.27, with the phone's own firmware from `tools/extract-vendor-firmware -d raven`; the driver and node are merged, [kernel #114](https://github.com/derekross/linux-omarchy-mobile/pull/114); [plan](../device/raven/HAPTICS-TORCH-PLAN.md)) | works (tested on `omamobile-gs101-torch`; the LED's node is now in the published kernel, [kernel #113](https://github.com/derekross/linux-omarchy-mobile/pull/113), not yet run from it; [plan](../device/raven/HAPTICS-TORCH-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-gnss`; [plan](../device/raven/GNSS-PLAN.md)) | works (unpublished kernel, `omamobile-gs101-aoc`; [plan](../device/raven/AUDIO-PLAN.md)) | no (the amplifiers stay off until raven's own limits are validated, and without them the card doesn't probe, so no mics either; [plan](../device/raven/AUDIO-PLAN.md#without-the-amplifiers-2026-10-27-gb3d6253b0d61-device-raven-0123)) | works (accelerometer, light, proximity, compass through the AoC; unpublished kernel) | WIP (calls, texts and data on an unpublished kernel, `omamobile-gs101-cpif`; the package doesn't enable it; [plan](../device/raven/MODEM-PLAN.md)) | no | no | no | no | +| Pixel 7a ([notes](../device/lynx/NOTES.md)) | lynx | gs201 (Tensor G2) | WIP ([#36](https://github.com/derekross/omarchy-mobile/issues/36): Arch root on `userdata` from slot B, SSH; the device package marks the slot successful) | WIP (UFS behind the read-only guard, in the published kernel, [kernel #91](https://github.com/derekross/linux-omarchy-mobile/pull/91); [notes](../device/lynx/NOTES.md#2026-10-24-on-screen-console-and-ufs)) | WIP (simpledrm console only, [notes](../device/lynx/NOTES.md)) | no | WIP (GT9895 touches in the session, in the published kernel, [kernel #93](https://github.com/derekross/linux-omarchy-mobile/pull/93); [notes](../device/lynx/NOTES.md#2026-10-24-touchscreen-rtc-and-slot-retries)) | no | works | no (parked at the chip's boot ROM; [plan](../device/lynx/WIFI-PLAN.md)) | WIP (same chip as Wi-Fi; scans through its own UART; the device tree is in review, [kernel #98](https://github.com/derekross/linux-omarchy-mobile/pull/98), and the package side, [#98](https://github.com/derekross/omarchy-mobile/pull/98); [plan](../device/lynx/WIFI-PLAN.md)) | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 6 | oriole | gs101 (Tensor G1) | WIP ([#2](https://github.com/derekross/omarchy-mobile/issues/2): descriptor and boot images from the factory image and a retail phone; not booted yet) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | | Pixel 4 | flame | SM8150 (Snapdragon 855) | testing (temporary RAM boot; [notes](../device/flame/BRINGUP-M1.md)) | testing (RAM probe; all UFS read-only) | testing (1080x2280 console; software desktop in separate Arch payload) | testing (separate Arch payload; FD640 contexts, llvmpipe desktop) | testing (separate Arch payload; events and PIN unlock verified) | no | testing (NCM + ACM + SSH; sustained transfers can disconnect) | testing (guarded RAM scan; association untested) | no | no | no | no | no | no | - | no | no | no | no | no | no | - | | Pixel 4 XL ([notes](../device/coral/NOTES.md)) | coral | SM8150 (Snapdragon 855) | WIP (direct ABL v2 boot on the test handset's slot A; slot-B install and §3.1 entry pending; [notes](../device/coral/BRINGUP-M1.md)) | testing (read-only `blockdev` guard + RAM `overlayfs`) | testing (1440x3040@60Hz S6E3HC2 DSC 1.1 KMS, DPMS, brightness) | testing (Adreno 640 / FD640 Mesa Freedreno, Hyprland) | testing (FTS SPI multitouch + read-only flash guard) | testing (power via `qcom-pon` + volume via `gpio-keys`) | testing (CDC ECM + ACM + SSH; stays up with host USB switched off) | testing (`WCN3990` `ath10k_snoc` + `rmtfs -r`, WPA2/DHCP/HTTPS; radio sessions ran before the modem baseline) | WIP (`WCN3990` `hci_qca` `hci0` up + BLE scan; audio/pairing open) | WIP (PM8150B ADC `VBAT_SNS` voltage + FG temp; aftermarket pack on test unit: no reply from `1-0036`) | testing (PM8150B SMB5 charger with `4.20 V` / `500 mA` kernel clamp) | testing (`CS40L25A` I2C click waveform) | testing (PM8150L flash LEDs + quick-settings tile) | no | - | testing (QDSP6 + dual `CS35L36` amps capped at `-26 dB` + `IA8508` SPI mic DSP) | testing (`SLPI` + `fastrpc` + RAM-backed `hexagonrpcd` + QMI SSC: 7 sensors + Soli radar) | WIP (`MPSS` boots with `rmtfs -r` + patched `tqftpserv`, SIM detected; no IPA/voice yet; radio sessions ran before the modem baseline) | no | testing (`CAMSS` + `IMX363`, `IMX481`, `IMX520`, dual `OV7251` NIR; `libcamera` softISP) | no | - | | Pixel 9a ([notes](../device/tegu/NOTES.md)) | tegu | zumapro (Tensor G4) | WIP ([#28](https://github.com/derekross/omarchy-mobile/issues/28): clocks, ACPM, panel and TCPC merged; the SoC and board device tree is in review, [kernel #80](https://github.com/derekross/linux-omarchy-mobile/pull/80)) | WIP (UFS root; reset across suspend merged, idle clock gating [kernel #99](https://github.com/derekross/linux-omarchy-mobile/pull/99)) | WIP (DSI panel 1080x2424 at 60 Hz, 120 Hz in review; panel driver merged, display DT [kernel #90](https://github.com/derekross/linux-omarchy-mobile/pull/90), 120 Hz [kernel #88](https://github.com/derekross/linux-omarchy-mobile/pull/88)) | WIP (Panthor to 890 MHz; DT [kernel #85](https://github.com/derekross/linux-omarchy-mobile/pull/85), [kernel #87](https://github.com/derekross/linux-omarchy-mobile/pull/87)) | WIP (DT [kernel #81](https://github.com/derekross/linux-omarchy-mobile/pull/81), sleep fix [kernel #82](https://github.com/derekross/linux-omarchy-mobile/pull/82)) | WIP (gpio-keys; Power wakes s2idle) | WIP (gadget and replug; host mode: VBUS on, no enumeration yet; repeater driver [kernel #107](https://github.com/derekross/linux-omarchy-mobile/pull/107)) | WIP (brcmfmac joins WPA2; driver in review, [kernel #56](https://github.com/derekross/linux-omarchy-mobile/pull/56)) | WIP (BCM4383 merged, [kernel #94](https://github.com/derekross/linux-omarchy-mobile/pull/94); BlueZ, A2DP) | WIP (the gauge reads; unpublished kernel) | WIP (status and inhibit [kernel #92](https://github.com/derekross/linux-omarchy-mobile/pull/92); PD contract, tcpci_maxim merged, [kernel #97](https://github.com/derekross/linux-omarchy-mobile/pull/97)) | WIP (CS40L26, VPBR merged, [kernel #95](https://github.com/derekross/linux-omarchy-mobile/pull/95); DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96)) | WIP (LM3644, 25 steps; DT [kernel #96](https://github.com/derekross/linux-omarchy-mobile/pull/96)) | no (firmware and CHPP run; the engine faulted with its three rails off at hand-off, now on, [kernel #101](https://github.com/derekross/linux-omarchy-mobile/pull/101)) | WIP (audio and sensors; unpublished kernel) | WIP (speakers capped, mics, A2DP; unpublished kernel) | WIP (accelerometer, light, proximity; unpublished kernel) | WIP (ONLINE with IPC, no SIM yet) | WIP (reads cards, [kernel #100](https://github.com/derekross/linux-omarchy-mobile/pull/100), clock [kernel #104](https://github.com/derekross/linux-omarchy-mobile/pull/104)) | WIP (all three stream through libcamera, switching between them works; [kernel #63](https://github.com/derekross/linux-omarchy-mobile/pull/63), [kernel #103](https://github.com/derekross/linux-omarchy-mobile/pull/103)) | WIP (s2idle; Power and RTC alarm wake; drain still high) | WIP (sensor, trusted app and secure storage up, its stores on loop devices of images in `userdata`, [#101](https://github.com/derekross/omarchy-mobile/pull/101); factory calibration fetched, not loaded yet) | | Pixel 8 Pro ([notes](../device/husky/NOTES.md)) | husky | zuma (Tensor G3) | WIP ([#1](https://github.com/derekross/omarchy-mobile/issues/1): our kernel boots from slot B; the zuma device tree is merged ([kernel #13](https://github.com/derekross/linux-omarchy-mobile/pull/13))) | testing (UFS at HS-G4 behind the read-only guard; Arch on `userdata`; [UFS-PLAN](../device/husky/UFS-PLAN.md)) | WIP (simple-framebuffer console) | no | no | no | testing (USB and SSH) | no | no | no | no | no | no | no | no | no | no | no | no | no | no | no | -| Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland lock screen) | testing (Panthor on the Mali-G710; Hyprland renders on it; in review, [kernel #129](https://github.com/derekross/linux-omarchy-mobile/pull/129)) | WIP (FocalTech FT3658 driver merged, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109); the touch node is next) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; a replug needs a reboot; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | no | no | no | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; in review, [kernel #130](https://github.com/derekross/linux-omarchy-mobile/pull/130)) | no | no | no | no | no | no | no | no | no | no | +| Pixel 7 ([notes](../device/panther/NOTES.md)) | panther | gs201 (Tensor G2) | WIP (slot B, not marked successful; Arch and Hyprland boot; [BRINGUP-M1](../device/panther/BRINGUP-M1.md); board file merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (UFS behind the read-only guard; Arch on `userdata`; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | WIP (simple-framebuffer: console and the Hyprland lock screen) | testing (Panthor on the Mali-G710; Hyprland renders on it; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the always-on rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | WIP (FocalTech FT3658: touches drive Hyprland and unlock the PIN screen on a test kernel; the driver, [kernel #109](https://github.com/derekross/linux-omarchy-mobile/pull/109), and the touch node, [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), are merged; the driver's review fixes, [kernel #133](https://github.com/derekross/linux-omarchy-mobile/pull/133), and the kernel option with the touch notes, [#149](https://github.com/derekross/omarchy-mobile/pull/149), are in review) | testing (gpio-keys: power, volume; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | testing (USB and SSH; a replug needs a reboot; merged, [kernel #108](https://github.com/derekross/linux-omarchy-mobile/pull/108)) | no | no | no | no | testing (CS40L26 with the phone's own firmware, `tools/extract-vendor-firmware -d panther`; merged through [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134), with the feedbackd rule in device-panther 0.1.1, [#145](https://github.com/derekross/omarchy-mobile/pull/145); [notes](../device/panther/NOTES.md#2026-10-28-the-gpu-and-the-haptics-power-off-and-usb-after-a-replug)) | no | no | no | no | no | no | no | no | no (s2idle by default since [kernel #134](https://github.com/derekross/linux-omarchy-mobile/pull/134) and device-panther 0.1.1; not run yet) | no | | *Template* | *codename* | *SoC* | | | | | | | | | | | | | | | | | | | | | | | ## cheetah (Pixel 7 Pro) in detail | Subsystem | Status | Notes | Plan | | --- | --- | --- | --- | -| Boot | works | Mainline on slot B, stock Android kept on slot A; the boot-success marker sets the slot's flags in `devinfo` | [BRINGUP-M1](../device/cheetah/BRINGUP-M1.md) | +| Boot | works | Mainline on slot B, stock Android kept on slot A; the boot-success marker sets the slot's flags in `devinfo`. `boot` and `init_boot` carry AVB footers, which a phone whose `vbmeta_b` chains them, as stock's does, needs to start slot B ([NOTES](../device/cheetah/NOTES.md#2026-10-28-a-phone-whose-vbmeta_b-chains-boot-and-init_boot-as-stocks-does-needs-avb-footers-on-them), [#104](https://github.com/derekross/omarchy-mobile/pull/104)) | [BRINGUP-M1](../device/cheetah/BRINGUP-M1.md) | | Storage | works | UFS, behind the read-only partition guard; the Arch root on `userdata` | [NOTES](../device/cheetah/NOTES.md) | | Display | works | Our flip-only KMS driver (gs-decon) on DECON0 → DSIM0 → S6E3HC4, 120 Hz by default, brightness, DPMS; the panel sleeps when the screen is off | [DISPLAY-PLAN](../device/cheetah/DISPLAY-PLAN.md) | | GPU | works | Mali-G710 on Panthor, with Mesa patched for G710; frequency scaling through ACPM | [GPU-PLAN](../device/cheetah/GPU-PLAN.md), [ACPM-PLAN](../device/cheetah/ACPM-PLAN.md) | @@ -54,7 +54,7 @@ The status of each device, as verified on real hardware. Rows in the matrix have | Modem | WIP (boots; needs a SIM) | S5300 on PCIe at Gen3 x2: the modem boots Google's firmware from RAM copies of its NV to ONLINE (M3.4.5b, M3.4.6), the CP serves the SIT IPC (SIM state, radio state, AT +CFUN; M4.1h) and idles its link as stock does, with NV unchanged across ten minutes of idle cycles (M4.1i). It needs the phone's own board id (`omamobile-modem` 0.1.4). A reboot with the modem up hung once (a DBI access while the PHY was isolated); the fix passed on the phone, and reboots with the modem up are clean (M4.1j, M4.1k, 2026-10-13). `omamobile-mmd` shows the modem to NetworkManager and the phone apps (T1). No SIM has been in the phone yet, so registration, SMS, data and calls (M4.2 on) are untested; the SIM runbook is ready. Open: each modem power-off (so each reboot with the modem up) causes one recovered UFS error-handler pass, so the modem stays on once up | [MODEM-PLAN](../device/cheetah/MODEM-PLAN.md), [MODEM-CLIENT](../device/cheetah/MODEM-CLIENT.md), [MODEM-SIT-RESEARCH](../device/cheetah/MODEM-SIT-RESEARCH.md) | | NFC | works | ST54J over I2C through st-nci with our plain-NCI link, loaded at boot; neard (patched for empty Type 4 tags) reads and writes tags, and tapping a tag with a web link opens it (`omamobile-nfc-open`): writing a tag and opening its link tested on the phone (N3). Card emulation and the secure element are not used | [RADIOS-CAMERA-PLAN](../device/cheetah/RADIOS-CAMERA-PLAN.md) §3 | | Cameras | works (telephoto fixed-focus) | Ultrawide (Sony IMX386, D-PHY link 2): works end to end through our CSIS/WDMA driver and libcamera's software ISP (CAM5), basic quality (no Google ISP or tuning); a libcamera build with autofocus and low-light patches is installed, not yet evaluated (CAM5.3). Front (Samsung S5K3J1, D-PHY link 0): real images, raw and through libcamera (`cam -c1`, 30 fps, no WDMA errors; F.5-F.7, 2026-10-13). Main (Samsung S5KGN1, C-PHY link 1): 2016x1136 at 30 fps through libcamera with no WDMA errors. Telephoto (S5KGM5, C-PHY): 26 fps through libcamera, colour bars correct; its lens (SEM1215) isn't driven yet, so it stays at its resting focus: distant subjects are sharp (outdoors, 2026-10-26), close ones soft, and tap to focus does nothing. The CSIS write DMA (not the link) loses lines that arrive faster than about 400 MB/s within a line, so the sensors lengthen their lines to stay under `samsung,max-line-throughput` (360 in cheetah's DT for the main, telephoto and front cameras; the front's full 3840x2736 mode runs at 26 fps). The ultrawide (imx386) follows the same rule, so its full 4032x3016 mode streams (23 fps; one run in several still showed WDMA errors), and with 384 MiB of CMA `cam` without options runs every camera at full size (main 12 MP at 9.4 fps). The telephoto's lens (SEM1215) answers on a 950 kHz bus but holds the bus when driven longer, so the telephoto runs at fixed focus. Sensor and DC-PHY settings come from the user's own camera software (`tools/extract-camera-data`), never shipped. Since omamobile-device-cheetah 0.1.30 the camera modules load after boot (`omamobile-camera.timer`), the DMA-BUF heaps are open to the session (libcamera's software ISP), WirePlumber names them Main, Ultrawide, Telephoto and Front camera (0.1.31). The default camera app is omacam ("Camera", omamobile-apps 0.2.0; [CAMERA-APP-PLAN](CAMERA-APP-PLAN.md)): libcamera directly, zoom across the three back lenses, full-resolution photos. GNOME Snapshot is optional, named "Snapshot", for video until omacam records it; browsers and video calls use the cameras through PipeWire (`pipewire-libcamera`). Picture quality: libcamera 0.7.2-4.21 adds chroma noise reduction and defective pixel correction, and omacam 0.3.3 has Night mode and an HDR chip, bursts of raw frames aligned, merged and finished on the phone (Night: 12 frames in about 4.6 s, Q5.3 on 2026-10-21); single shots are still well below stock's | [CAMERA-PLAN](../device/cheetah/CAMERA-PLAN.md), [CAMERA-QUALITY-PLAN](CAMERA-QUALITY-PLAN.md) | -| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Not on by default: the phone doesn't sleep by itself when the screen goes off until S8 (Power to sleep and wake, idle sleep, a day of use) has run. Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | +| Suspend | WIP | s2idle works when asked for (`systemctl suspend`, `rtcwake`): `pm_test` dry runs, wakes on a volume key and on the RTC alarm, 20 of 20 unattended cycles (S3b, S4); UFS powers down in suspend by default (`spm_lvl` 5). Wi-Fi stays connected across sleep: 31 of 31 freezes with the D3 handshake (S5b-3, S5c, 2026-10-19), and the sleep hook keeps it loaded. The AoC and sensors work across sleep, and a running sensor stream doesn't wake the phone (S6, 2026-10-19). Screen off, with Wi-Fi up, it draws 434 mA awake and 312 mA in s2idle: about 16 h of standby on the 4986 mAh battery (S7, 2026-10-19), against 32-50 mA in stock's deep sleep. Auto-sleep is in the packages and off by default ([#64](https://github.com/derekross/omarchy-mobile/pull/64), omamobile-shell 0.2.29): with the `omamobile-sleep` toggle on, the phone sleeps 30 s after the screen goes off behind a secure lock and at once on Power, and Power wakes it to the PIN pad; 13 cycles in one boot with 0 failures (P0-P5, 2026-10-26). The toggle stays off until a day of use (P6) and a power-off from Linux (P7) have run; P5 stopped on a speaker trip that turned out not to come from sleep ([NOTES](../device/cheetah/NOTES.md#2026-10-27-the-muted-speakers-were-the-open-loop-coil-estimate-not-sleep-the-static-was-the-boost-converter-the-earpiece-is-the-top-speaker)). Wi-Fi traffic and a USB plug can't wake it, a few RTC cycles wake early on a PMIC interrupt not yet identified, and the modem has never run across a suspend. Deep sleep (SYS_SLEEP), which stock's standby numbers need, is research and not started | [SUSPEND-PLAN](../device/cheetah/SUSPEND-PLAN.md) | | Fingerprint | works (opt-in) | Google's HAL in a chroot behind a bridge and Trusty's fingerprint TA on our kernel (F3-F9), fprintd with our libfprint driver: enrollment from the shell, and the lock screen unlocks with a finger alongside the PIN pad or password, with the keyboard usable over the lock (F16b). A verify stays open across system sleep, and an enrollment interrupted by sleep fails cleanly (libfprint 1.6, 2026-10-19). Opt-in: `omamobile-fp.service` ships disabled, because its first run writes Trusty's secure storage | [FINGERPRINT-PLAN](../device/cheetah/FINGERPRINT-PLAN.md), [FINGERPRINT-RESEARCH](../device/cheetah/FINGERPRINT-RESEARCH.md) | ## Wanted @@ -63,7 +63,7 @@ Devices we'd like to support, with the closest starting point. Open an issue to | Device | Codename | SoC | Starting point | | --- | --- | --- | --- | -| Pixel 7a | lynx | gs201 | **WIP, community port: [#36](https://github.com/derekross/omarchy-mobile/issues/36)**, in the matrix above: Arch on `userdata` from slot B with USB and SSH; UFS and touch are in the published kernel ([kernel #91](https://github.com/derekross/linux-omarchy-mobile/pull/91), [kernel #93](https://github.com/derekross/linux-omarchy-mobile/pull/93)), its device package is merged, and Wi-Fi is parked at the chip's boot ROM ([plan](../device/lynx/WIFI-PLAN.md)) | +| Pixel 7a | lynx | gs201 | **WIP, community port: [#36](https://github.com/derekross/omarchy-mobile/issues/36)**, in the matrix above: Arch on `userdata` from slot B with USB and SSH; UFS and touch are in the published kernel ([kernel #91](https://github.com/derekross/linux-omarchy-mobile/pull/91), [kernel #93](https://github.com/derekross/linux-omarchy-mobile/pull/93)), its device package is merged, Wi-Fi is parked at the chip's boot ROM ([plan](../device/lynx/WIFI-PLAN.md)), and Bluetooth is in review ([kernel #98](https://github.com/derekross/linux-omarchy-mobile/pull/98), [#98](https://github.com/derekross/omarchy-mobile/pull/98)) | | Pixel Fold | felix | gs201 | **WIP, community port: [#3](https://github.com/derekross/omarchy-mobile/issues/3)**; as panther, with two panels (DECON1 drives the cover, DECON0 the inner panel) | | Pixel Tablet | tangorpro | gs201 | as panther; no modem | | Pixel 6 | oriole | gs101 | **WIP, community port: [#2](https://github.com/derekross/omarchy-mobile/issues/2)**; our preferred second device. Upstream mainline `gs101-oriole.dts` | @@ -73,6 +73,8 @@ Devices we'd like to support, with the closest starting point. Open an issue to | Pixel 9 family | tokay, caiman, komodo, comet, tegu | zumapro (Tensor G4) | 9a (tegu): WIP, in the matrix above; SoC patches are merging into linux-omarchy-mobile, the board DTS isn't public yet; tracking [#28](https://github.com/derekross/omarchy-mobile/issues/28) | | Pixel 10 family | mustang (10 Pro XL) | laguna (Tensor G5) | 10 Pro XL (mustang): stock facts, contributors welcome ([#18](https://github.com/derekross/omarchy-mobile/issues/18)) | | Pixel 11 Pro, 11 Pro Fold | grizzly, yogi | malibu (Tensor G6) | stock facts, contributors welcome: 11 Pro ([#26](https://github.com/derekross/omarchy-mobile/issues/26)), 11 Pro Fold ([#40](https://github.com/derekross/omarchy-mobile/issues/40)) | -| Pixel 4 XL | coral | SM8150 (Snapdragon 855) | **in review: [#52](https://github.com/derekross/omarchy-mobile/pull/52)**: bring-up notes ([BRINGUP-M1](../device/coral/BRINGUP-M1.md), [NOTES](../device/coral/NOTES.md)) and companion kernel/userspace sources ([omarchy-mobile-coral v0.2.3](https://github.com/HemangKumawat/omarchy-mobile-coral/tree/v0.2.3)); slot-B installer and `CONTRIBUTING.md` §3.1 entry still to land | +| Pixel 4 | flame | SM8150 (Snapdragon 855) | **WIP, community port**, in the matrix above: the RAM-only first-light probe is merged ([BRINGUP-M1](../device/flame/BRINGUP-M1.md)); the native install is in review, split out of [#17](https://github.com/derekross/omarchy-mobile/pull/17) into [#55](https://github.com/derekross/omarchy-mobile/pull/55), [#56](https://github.com/derekross/omarchy-mobile/pull/56), [#58](https://github.com/derekross/omarchy-mobile/pull/58) and [#59](https://github.com/derekross/omarchy-mobile/pull/59) | +| Pixel 4 XL | coral | SM8150 (Snapdragon 855) | **WIP, community port**, in the matrix above: bring-up notes merged ([#52](https://github.com/derekross/omarchy-mobile/pull/52): [BRINGUP-M1](../device/coral/BRINGUP-M1.md), [NOTES](../device/coral/NOTES.md)), with companion kernel/userspace sources ([omarchy-mobile-coral v0.2.3](https://github.com/HemangKumawat/omarchy-mobile-coral/tree/v0.2.3)); slot-B installer and `CONTRIBUTING.md` §3.1 entry still to land | | POCO F3 | alioth | SM8250 (Snapdragon 870) | the first non-Pixel port: a guarded installer and root image in review ([#25](https://github.com/derekross/omarchy-mobile/pull/25)) | +| OnePlus 13 | dodge | SM8750 (Snapdragon 8 Elite) | **in review: [#111](https://github.com/derekross/omarchy-mobile/pull/111)**: device files and notes; its kernel is [kernel #115](https://github.com/derekross/linux-omarchy-mobile/pull/115); the guarded installer follows in a later pull request | | PinePhone Pro | pinephone-pro | Rockchip RK3399S | No port in this tree yet; mainline's `rk3399-pinephone-pro.dts` is already in our kernel. Prior art: [Omarchy on the PinePhone Pro](https://github.com/FlorencioJP/omarchy-mobile-pinephone-pro) |