From fadd2110a49eb1a7d3c846b6209b3fde6e9f4b7a Mon Sep 17 00:00:00 2001 From: Lef Date: Sat, 7 Nov 2026 11:53:54 +0200 Subject: [PATCH] arm64: dts: exynos: google: zuma-husky: add the S2MPG15 sub-PMIC with the GNSS supplies, disabled The Pixel 8 Pro's GNSS receiver is fed by three LDOs of the S2MPG15 sub-PMIC (Google's L9S_GNSS_CORE, L10S_GNSS_RF and L11S_GNSS_AUX), which stock leaves always on. Add the sub-PMIC as pmic-2 under the ACPM node, status "disabled", with only those three rails and stock's voltage ranges, as the 7 Pro does for its S2MPG13. The ACPM channel the driver uses (2, speedy 1) is the one Google's zuma device tree gives s2mpg15mfd. Disabled, so nothing changes at boot; the GNSS node that takes these supplies comes separately. Built, not booted. Signed-off-by: Lef --- .../boot/dts/exynos/google/zuma-husky.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/google/zuma-husky.dts b/arch/arm64/boot/dts/exynos/google/zuma-husky.dts index f9d30456ae..a52775be23 100644 --- a/arch/arm64/boot/dts/exynos/google/zuma-husky.dts +++ b/arch/arm64/boot/dts/exynos/google/zuma-husky.dts @@ -173,6 +173,40 @@ }; }; }; + + /* + * The sub PMIC (S2MPG15), for the GNSS receiver's three rails. On + * stock these are always on, which is why the ranges below are stock's + * and nothing sets a voltage at probe: the GNSS driver will switch + * them. Only these rails are described; every other rail of the chip + * is left as the bootloader set it. No interrupt. Disabled until it + * has been tried on the phone. + */ + pmic-2 { + compatible = "samsung,s2mpg15-pmic"; + status = "disabled"; + + regulators { + /* L9S_GNSS_CORE, L10S_GNSS_RF and L11S_GNSS_AUX. */ + ldo9s: ldo9s { + regulator-name = "vdd_gnss_core"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1300000>; + }; + + ldo10s: ldo10s { + regulator-name = "vdd_gnss_rf"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + }; + + ldo11s: ldo11s { + regulator-name = "vdd_gnss_aux"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + }; + }; + }; }; &spi20 {